devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Lothar Waßmann" <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
To: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
	Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: "Lothar Waßmann" <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
Subject: [PATCHv3 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card
Date: Tue, 17 Oct 2017 11:17:58 +0200	[thread overview]
Message-ID: <1508231883-12067-8-git-send-email-LW@KARO-electronics.de> (raw)
In-Reply-To: <1508231883-12067-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>

Convert the DTS sound setup to use the simple-audio-card driver.

Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
---
 arch/arm/boot/dts/imx6qdl-tx6.dtsi | 50 ++++++++++++++++++++++++++++++++------
 1 file changed, 42 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f1655b3..eb5accd 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -43,6 +43,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
 	aliases {
@@ -183,24 +184,56 @@
 	};
 
 	sound {
-		compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
+		compatible = "karo,imx6qdl-tx6-sgtl5000",
+			     "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_audmux>;
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
 	};
 };
 
 &audmux {
 	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
 };
 
 &can1 {
@@ -299,6 +332,7 @@
 
 	sgtl5000: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		VDDA-supply = <&reg_2v5>;
 		VDDIO-supply = <&reg_3v3>;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-10-17  9:17 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-17  8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann
2017-10-17  8:53 ` [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann
2017-10-17  8:53 ` [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann
2017-10-17  8:53 ` [PATCH 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann
2017-10-17  8:53 ` [PATCH 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann
2017-10-17  8:53 ` [PATCH 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann
2017-10-17  8:53 ` [PATCH 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann
2017-10-17  8:53 ` [PATCH 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann
     [not found] ` <1508230414-8090-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
2017-10-17  8:53   ` [PATCH 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann
2017-10-17  8:53   ` [PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann
2017-10-17  8:53 ` [PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann
2017-10-17  8:53 ` [PATCH 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann
2017-10-17  8:53 ` [PATCH 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann
2017-10-17  9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann
2017-10-17  9:17   ` [PATCHv3 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann
2017-10-17  9:17   ` [PATCHv3 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann
2017-10-17  9:17   ` [PATCHv3 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann
2017-10-17  9:17   ` [PATCHv3 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann
2017-10-17  9:17   ` [PATCHv3 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann
2017-10-17  9:17   ` [PATCHv3 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann
     [not found]   ` <1508231883-12067-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
2017-10-17  9:17     ` Lothar Waßmann [this message]
2017-10-17  9:18     ` [PATCHv3 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann
2017-10-18  3:06     ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Shawn Guo
2017-10-17  9:17   ` [PATCHv3 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann
2017-10-17  9:18   ` [PATCHv3 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann
2017-10-17  9:18   ` [PATCHv3 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann
2017-10-17  9:18   ` [PATCHv3 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1508231883-12067-8-git-send-email-LW@KARO-electronics.de \
    --to=lw-bxm8fmrdkqldimyjyosanrvvk+yq3zxh@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).