From: Weiyi Lu <weiyi.lu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>,
Weiyi Lu <weiyi.lu@mediatek.com>,
srv_heupstream@mediatek.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Fan Chen <fan.chen@mediatek.com>,
linux-mediatek@lists.infradead.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/9] Mediatek MT2712 clock and scpsys support
Date: Thu, 19 Oct 2017 10:48:41 +0800 [thread overview]
Message-ID: <1508381330-3700-1-git-send-email-weiyi.lu@mediatek.com> (raw)
This series is based on v4.14-rc1 and composed of
clock control (PATCH 1-4) and scpsys control (PATCH 5-9)
changes since v4:
- Refine scpsys and infracfg for bus protection by passing
a boolean flag to determine the register update method.
changes since v3:
- Rebase to v4.14-rc1.
changes since v2:
- ensure the clocks used by clocksource driver are registered
before clocksource init() by using CLK_OF_DECLARE()
- correct the frequency of clk32k/clkrtc_ext/clkrtc_int
changes since v1:
- Rebase to v4.13-next-soc.
- Refine scpsys and infracfg for bus protection.
Weiyi Lu (9):
dt-bindings: ARM: Mediatek: Document bindings for MT2712
clk: mediatek: Add dt-bindings for MT2712 clocks
clk: mediatek: Add MT2712 clock support
arm: dts: mt2712: Add clock controller device nodes
dt-bindings: soc: add MT2712 power dt-bindings
soc: mediatek: extend bus protection API
soc: mediatek: add dependent clock jpgdec/audio for scpsys
soc: mediatek: add MT2712 scpsys support
arm: dts: Add power controller device node of MT2712
.../bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 +
.../bindings/arm/mediatek/mediatek,bdpsys.txt | 1 +
.../bindings/arm/mediatek/mediatek,imgsys.txt | 1 +
.../bindings/arm/mediatek/mediatek,infracfg.txt | 1 +
.../bindings/arm/mediatek/mediatek,jpgdecsys.txt | 22 +
.../bindings/arm/mediatek/mediatek,mcucfg.txt | 22 +
.../bindings/arm/mediatek/mediatek,mfgcfg.txt | 22 +
.../bindings/arm/mediatek/mediatek,mmsys.txt | 1 +
.../bindings/arm/mediatek/mediatek,pericfg.txt | 1 +
.../bindings/arm/mediatek/mediatek,topckgen.txt | 1 +
.../bindings/arm/mediatek/mediatek,vdecsys.txt | 1 +
.../bindings/arm/mediatek/mediatek,vencsys.txt | 1 +
.../devicetree/bindings/soc/mediatek/scpsys.txt | 3 +
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 131 ++
drivers/clk/mediatek/Kconfig | 50 +
drivers/clk/mediatek/Makefile | 8 +
drivers/clk/mediatek/clk-mt2712-bdp.c | 102 ++
drivers/clk/mediatek/clk-mt2712-img.c | 80 ++
drivers/clk/mediatek/clk-mt2712-jpgdec.c | 76 ++
drivers/clk/mediatek/clk-mt2712-mfg.c | 75 +
drivers/clk/mediatek/clk-mt2712-mm.c | 170 +++
drivers/clk/mediatek/clk-mt2712-vdec.c | 94 ++
drivers/clk/mediatek/clk-mt2712-venc.c | 77 ++
drivers/clk/mediatek/clk-mt2712.c | 1435 ++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.h | 2 +
drivers/clk/mediatek/clk-pll.c | 13 +-
drivers/soc/mediatek/mtk-infracfg.c | 24 +-
drivers/soc/mediatek/mtk-scpsys.c | 140 +-
include/dt-bindings/clock/mt2712-clk.h | 427 ++++++
include/dt-bindings/power/mt2712-power.h | 26 +
include/linux/soc/mediatek/infracfg.h | 7 +-
31 files changed, 2991 insertions(+), 24 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
create mode 100644 drivers/clk/mediatek/clk-mt2712-bdp.c
create mode 100644 drivers/clk/mediatek/clk-mt2712-img.c
create mode 100644 drivers/clk/mediatek/clk-mt2712-jpgdec.c
create mode 100644 drivers/clk/mediatek/clk-mt2712-mfg.c
create mode 100644 drivers/clk/mediatek/clk-mt2712-mm.c
create mode 100644 drivers/clk/mediatek/clk-mt2712-vdec.c
create mode 100644 drivers/clk/mediatek/clk-mt2712-venc.c
create mode 100644 drivers/clk/mediatek/clk-mt2712.c
create mode 100644 include/dt-bindings/clock/mt2712-clk.h
create mode 100644 include/dt-bindings/power/mt2712-power.h
next reply other threads:[~2017-10-19 2:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 2:48 Weiyi Lu [this message]
2017-10-19 2:48 ` [PATCH v5 1/9] dt-bindings: ARM: Mediatek: Document bindings for MT2712 Weiyi Lu
2017-10-19 2:48 ` [PATCH v5 2/9] clk: mediatek: Add dt-bindings for MT2712 clocks Weiyi Lu
2017-10-19 2:48 ` [PATCH v5 3/9] clk: mediatek: Add MT2712 clock support Weiyi Lu
2017-10-19 2:48 ` [PATCH v5 4/9] arm: dts: mt2712: Add clock controller device nodes Weiyi Lu
2017-10-19 2:48 ` [PATCH v5 5/9] dt-bindings: soc: add MT2712 power dt-bindings Weiyi Lu
2017-10-19 2:48 ` [PATCH v5 6/9] soc: mediatek: extend bus protection API Weiyi Lu
2017-10-19 17:20 ` Matthias Brugger
2017-10-19 2:48 ` [PATCH v5 8/9] soc: mediatek: add MT2712 scpsys support Weiyi Lu
[not found] ` <1508381330-3700-1-git-send-email-weiyi.lu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-10-19 2:48 ` [PATCH v5 7/9] soc: mediatek: add dependent clock jpgdec/audio for scpsys Weiyi Lu
2017-10-19 2:48 ` [PATCH v5 9/9] arm: dts: Add power controller device node of MT2712 Weiyi Lu
2017-10-19 17:06 ` [PATCH v5 0/9] Mediatek MT2712 clock and scpsys support Matthias Brugger
2017-10-24 8:38 ` Stephen Boyd
[not found] ` <20171024083830.GD15990-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-10-25 8:38 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508381330-3700-1-git-send-email-weiyi.lu@mediatek.com \
--to=weiyi.lu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=fan.chen@mediatek.com \
--cc=jamesjj.liao@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).