From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>
Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>
Subject: [PATCH v2 0/9] r8a7745/iwg22d DT rework + serial + HS-USB + IIC
Date: Mon, 23 Oct 2017 18:09:21 +0100 [thread overview]
Message-ID: <1508778570-28795-1-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
This series brings under the same roof a few patches that needed a v2
and that are related to either r8a7745 or iwg22d, with the goal of making
the merge process as smooth as possible.
Patches [1-4] define a new DT architecture for the iW-RainboW-G22D SODIMM
Development Platform to include the configuration with the HDMI daughter
board and to define the serial interfaces.
Patches [5-8] add USB function support to the r8a7745 SoC and to the
iwg22d board. The patches providing the definition of compatible strings:
* "renesas,r8a7745-usb-dmac", and
* "renesas,usbhs-r8a7745"
(on which these USB patches depend on) have been accepted by the
respective maintainers already, but it will take a little bit for the
definitions to appear on a renesas-devel tag. For reference:
https://patchwork.kernel.org/patch/9990063/
https://patchwork.kernel.org/patch/9987411/
https://patchwork.kernel.org/patch/9990113/
Patch 9 adds IIC cores to the r8a7745 SoC.
The patches of this series apply smoothly on top of tag:
"renesas-devel-20171018-v4.14-rc5".
Best regards,
Fab
Biju Das (4):
ARM: dts: r8a7745: Add HS-USB device node
ARM: dts: r8a7745: Add USB-DMAC device nodes
ARM: dts: r8a7745: Enable DMA for HSUSB
ARM: dts: iwg22d-sodimm: Enable HS-USB
Fabrizio Castro (5):
ARM: dts: iwg22d: Use /dev/ttySC3 as debug console
ARM: dts: iwg22d: Add /dev/ttySC5 support
ARM: dts: iwg22d-sodimm-dbhd-ca: Add device tree for HDMI DB
ARM: dts: iwg22d-sodimm: sort dt nodes
ARM: dts: r8a7745: Add IIC cores to dtsi
arch/arm/boot/dts/Makefile | 1 +
.../arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts | 61 +++++++++++++++
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 87 ++++++++++++++--------
arch/arm/boot/dts/r8a7745.dtsi | 81 ++++++++++++++++++++
4 files changed, 199 insertions(+), 31 deletions(-)
create mode 100644 arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
--
2.7.4
next reply other threads:[~2017-10-23 17:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-23 17:09 Fabrizio Castro [this message]
[not found] ` <1508778570-28795-1-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
2017-10-23 17:09 ` [PATCH v2 1/9] ARM: dts: iwg22d: Use /dev/ttySC3 as debug console Fabrizio Castro
2017-10-23 17:09 ` [PATCH v2 2/9] ARM: dts: iwg22d: Add /dev/ttySC5 support Fabrizio Castro
2017-10-23 17:09 ` [PATCH v2 6/9] ARM: dts: r8a7745: Add USB-DMAC device nodes Fabrizio Castro
2017-10-23 17:09 ` [PATCH v2 7/9] ARM: dts: r8a7745: Enable DMA for HSUSB Fabrizio Castro
2017-10-23 17:09 ` [PATCH v2 9/9] ARM: dts: r8a7745: Add IIC cores to dtsi Fabrizio Castro
2017-10-23 17:09 ` [PATCH v2 3/9] ARM: dts: iwg22d-sodimm-dbhd-ca: Add device tree for HDMI DB Fabrizio Castro
2017-10-23 17:09 ` [PATCH v2 4/9] ARM: dts: iwg22d-sodimm: sort dt nodes Fabrizio Castro
2017-10-23 17:09 ` [PATCH v2 5/9] ARM: dts: r8a7745: Add HS-USB device node Fabrizio Castro
2017-10-23 17:09 ` [PATCH v2 8/9] ARM: dts: iwg22d-sodimm: Enable HS-USB Fabrizio Castro
2017-10-29 15:12 ` [PATCH v2 0/9] r8a7745/iwg22d DT rework + serial + HS-USB + IIC Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508778570-28795-1-git-send-email-fabrizio.castro@bp.renesas.com \
--to=fabrizio.castro@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).