devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: ALKML <linux-arm-kernel@lists.infradead.org>,
	LKML <linux-kernel@vger.kernel.org>,
	DTML <devicetree@vger.kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Roy Franz <roy.franz@cavium.com>,
	Harb Abdulhamid <harba@codeaurora.org>,
	Nishanth Menon <nm@ti.com>, Arnd Bergmann <arnd@arndb.de>,
	Loc Ho <lho@apm.com>, Ryan Harkin <Ryan.Harkin@arm.com>,
	Jassi Brar <jassisinghbrar@gmail.com>
Subject: [PATCH v4 13/20] firmware: arm_scmi: refactor in preparation to support per-protocol channels
Date: Fri,  3 Nov 2017 14:47:50 +0000	[thread overview]
Message-ID: <1509720477-18936-14-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1509720477-18936-1-git-send-email-sudeep.holla@arm.com>

In order to support per-protocol channels if available, we need to
factor out all the mailbox channel information(Tx/Rx payload and
channel handle) out of the main SCMI instance information structure.

This patch refactors the existing channel information into a separate
chan_info structure.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/driver.c | 86 ++++++++++++++++++++++++--------------
 1 file changed, 54 insertions(+), 32 deletions(-)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 0c9dda72f10c..24acb421208c 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -105,6 +105,22 @@ struct scmi_desc {
 };
 
 /**
+ * struct scmi_chan_info - Structure representing a SCMI channel informfation
+ *
+ * @cl: Mailbox Client
+ * @chan: Transmit/Receive mailbox channel
+ * @payload: Transmit/Receive mailbox channel payload area
+ * @dev: Reference to device in the SCMI hierarchy corresponding to this
+ *	 channel
+ */
+struct scmi_chan_info {
+	struct mbox_client cl;
+	struct mbox_chan *chan;
+	void __iomem *payload;
+	struct device *dev;
+};
+
+/**
  * struct scmi_info - Structure representing a  SCMI instance
  *
  * @dev: Device pointer
@@ -112,10 +128,8 @@ struct scmi_desc {
  * @handle: Instance of SCMI handle to send to clients
  * @version: SCMI revision information containing protocol version,
  *	implementation version and (sub-)vendor identification.
- * @cl: Mailbox Client
- * @tx_chan: Transmit mailbox channel
- * @tx_payload: Transmit mailbox channel payload area
  * @minfo: Message info
+ * @tx_cinfo: Reference to SCMI channel information
  * @protocols_imp: list of protocols implemented, currently maximum of
  *	MAX_PROTOCOLS_IMP elements allocated by the base protocol
  * @node: list head
@@ -126,16 +140,14 @@ struct scmi_info {
 	const struct scmi_desc *desc;
 	struct scmi_revision_info version;
 	struct scmi_handle handle;
-	struct mbox_client cl;
-	struct mbox_chan *tx_chan;
-	void __iomem *tx_payload;
 	struct scmi_xfers_info minfo;
+	struct scmi_chan_info *tx_cinfo;
 	u8 *protocols_imp;
 	struct list_head node;
 	int users;
 };
 
-#define client_to_scmi_info(c)	container_of(c, struct scmi_info, cl)
+#define client_to_scmi_chan_info(c) container_of(c, struct scmi_chan_info, cl)
 #define handle_to_scmi_info(h)	container_of(h, struct scmi_info, handle)
 
 /*
@@ -218,10 +230,11 @@ static void scmi_rx_callback(struct mbox_client *cl, void *m)
 {
 	u16 xfer_id;
 	struct scmi_xfer *xfer;
-	struct scmi_info *info = client_to_scmi_info(cl);
+	struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
+	struct device *dev = cinfo->dev;
+	struct scmi_info *info = dev_get_drvdata(dev);
 	struct scmi_xfers_info *minfo = &info->minfo;
-	struct device *dev = info->dev;
-	struct scmi_shared_mem __iomem *mem = info->tx_payload;
+	struct scmi_shared_mem __iomem *mem = cinfo->payload;
 
 	xfer_id = MSG_XTRACT_TOKEN(ioread32(&mem->msg_header));
 
@@ -272,8 +285,8 @@ static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
 static void scmi_tx_prepare(struct mbox_client *cl, void *m)
 {
 	struct scmi_xfer *t = m;
-	struct scmi_info *info = client_to_scmi_info(cl);
-	struct scmi_shared_mem __iomem *mem = info->tx_payload;
+	struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
+	struct scmi_shared_mem __iomem *mem = cinfo->payload;
 
 	/* Mark channel busy + clear error */
 	iowrite32(0x0, &mem->channel_status);
@@ -366,15 +379,15 @@ void scmi_one_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 }
 
 static bool
-scmi_xfer_poll_done(const struct scmi_info *info, struct scmi_xfer *xfer)
+scmi_xfer_poll_done(const struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
 {
-	struct scmi_shared_mem *mem = info->tx_payload;
-	u16 xfer_id = MSG_XTRACT_TOKEN(le32_to_cpu(mem->msg_header));
+	struct scmi_shared_mem __iomem *mem = cinfo->payload;
+	u16 xfer_id = MSG_XTRACT_TOKEN(ioread32(&mem->msg_header));
 
 	if (xfer->hdr.seq != xfer_id)
 		return false;
 
-	return le32_to_cpu(mem->channel_status) &
+	return ioread32(&mem->channel_status) &
 		(SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR |
 		SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
 }
@@ -396,8 +409,9 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 	int timeout;
 	struct scmi_info *info = handle_to_scmi_info(handle);
 	struct device *dev = info->dev;
+	struct scmi_chan_info *cinfo = info->tx_cinfo;
 
-	ret = mbox_send_message(info->tx_chan, xfer);
+	ret = mbox_send_message(cinfo->chan, xfer);
 	if (ret < 0) {
 		dev_dbg(dev, "mbox send fail %d\n", ret);
 		return ret;
@@ -413,11 +427,11 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 		do {
 			udelay(5);
 			cur = ktime_get();
-		} while (!scmi_xfer_poll_done(info, xfer) &&
+		} while (!scmi_xfer_poll_done(cinfo, xfer) &&
 			 ktime_before(cur, stop));
 
 		if (ktime_before(cur, stop))
-			scmi_fetch_response(xfer, info->tx_payload);
+			scmi_fetch_response(xfer, cinfo->payload);
 		else
 			ret = -ETIMEDOUT;
 	} else {
@@ -437,7 +451,7 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 	 * Unfortunately, we have to kick the mailbox framework after we have
 	 * received our message.
 	 */
-	mbox_client_txdone(info->tx_chan, ret);
+	mbox_client_txdone(cinfo->chan, ret);
 
 	return ret;
 }
@@ -667,11 +681,11 @@ static int scmi_mailbox_check(struct device_node *np)
 	return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells", 0, &arg);
 }
 
-static int scmi_mbox_free_channel(struct scmi_info *info)
+static int scmi_mbox_free_channel(struct scmi_chan_info *cinfo)
 {
-	if (!IS_ERR_OR_NULL(info->tx_chan)) {
-		mbox_free_channel(info->tx_chan);
-		info->tx_chan = NULL;
+	if (!IS_ERR_OR_NULL(cinfo->chan)) {
+		mbox_free_channel(cinfo->chan);
+		cinfo->chan = NULL;
 	}
 
 	return 0;
@@ -691,7 +705,7 @@ static int scmi_remove(struct platform_device *pdev)
 
 	if (!ret)
 		/* Safe to free channels since no more users */
-		return scmi_mbox_free_channel(info);
+		return scmi_mbox_free_channel(info->tx_cinfo);
 
 	return ret;
 }
@@ -703,9 +717,17 @@ static inline int scmi_mbox_chan_setup(struct scmi_info *info)
 	resource_size_t size;
 	struct device *dev = info->dev;
 	struct device_node *shmem, *np = dev->of_node;
+	struct scmi_chan_info *cinfo;
 	struct mbox_client *cl;
 
-	cl = &info->cl;
+	cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL);
+	if (!cinfo)
+		return -ENOMEM;
+
+	info->tx_cinfo = cinfo;
+	cinfo->dev = dev;
+
+	cl = &cinfo->cl;
 	cl->dev = dev;
 	cl->rx_callback = scmi_rx_callback;
 	cl->tx_prepare = scmi_tx_prepare;
@@ -721,16 +743,16 @@ static inline int scmi_mbox_chan_setup(struct scmi_info *info)
 	}
 
 	size = resource_size(&res);
-	info->tx_payload = devm_ioremap(dev, res.start, size);
-	if (!info->tx_payload) {
+	cinfo->payload = devm_ioremap(info->dev, res.start, size);
+	if (!cinfo->payload) {
 		dev_err(dev, "failed to ioremap SCMI Tx payload\n");
 		return -EADDRNOTAVAIL;
 	}
 
 	/* Transmit channel is first entry i.e. index 0 */
-	info->tx_chan = mbox_request_channel(cl, 0);
-	if (IS_ERR(info->tx_chan)) {
-		ret = PTR_ERR(info->tx_chan);
+	cinfo->chan = mbox_request_channel(cl, 0);
+	if (IS_ERR(cinfo->chan)) {
+		ret = PTR_ERR(cinfo->chan);
 		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "failed to request SCMI Tx mailbox\n");
 		return ret;
@@ -798,7 +820,7 @@ static int scmi_probe(struct platform_device *pdev)
 	ret = scmi_base_protocol_init(handle);
 	if (ret) {
 		dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
-		scmi_mbox_free_channel(info);
+		scmi_mbox_free_channel(info->tx_cinfo);
 		return ret;
 	}
 
-- 
2.7.4

  parent reply	other threads:[~2017-11-03 14:47 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-03 14:47 [PATCH v4 00/20] firmware: ARM System Control and Management Interface(SCMI) support Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 01/20] dt-bindings: mailbox: add support for mailbox client shared memory Sudeep Holla
     [not found] ` <1509720477-18936-1-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2017-11-03 14:47   ` [PATCH v4 02/20] dt-bindings: arm: add support for ARM System Control and Management Interface(SCMI) protocol Sudeep Holla
     [not found]     ` <1509720477-18936-3-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2017-11-06 22:18       ` Rob Herring
2017-11-03 14:47   ` [PATCH v4 06/20] firmware: arm_scmi: add initial support for performance protocol Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 03/20] firmware: arm_scmi: add basic driver infrastructure for SCMI Sudeep Holla
     [not found]   ` <1509720477-18936-4-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2017-11-04 11:51     ` Jassi Brar
     [not found]       ` <CABb+yY0KR7rzUSqrG7vPJDZONK3rXtk03WX2eTGAdmkpvTUEbw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-11-08 16:33         ` Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 04/20] firmware: arm_scmi: add common infrastructure and support for base protocol Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 05/20] firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices Sudeep Holla
     [not found]   ` <1509720477-18936-6-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2017-11-21 18:04     ` Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 07/20] firmware: arm_scmi: add initial support for clock protocol Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 08/20] firmware: arm_scmi: add initial support for power protocol Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 09/20] firmware: arm_scmi: add initial support for sensor protocol Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 10/20] firmware: arm_scmi: probe and initialise all the supported protocols Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 11/20] firmware: arm_scmi: add support for polling based SCMI transfers Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 12/20] firmware: arm_scmi: add option for polling based performance domain operations Sudeep Holla
2017-11-03 14:47 ` Sudeep Holla [this message]
2017-11-03 14:47 ` [PATCH v4 14/20] firmware: arm_scmi: add per-protocol channels support using idr objects Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 15/20] firmware: arm_scmi: add device power domain support using genpd Sudeep Holla
     [not found]   ` <1509720477-18936-16-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2017-11-03 14:56     ` Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 16/20] clk: add support for clocks provided by SCMI Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 17/20] hwmon: (core) Add hwmon_max to hwmon_sensor_types enumeration Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 18/20] hwmon: add support for sensors exported via ARM SCMI Sudeep Holla
2017-11-03 14:47 ` [PATCH v4 19/20] cpufreq: add support for CPU DVFS based on SCMI message protocol Sudeep Holla
     [not found]   ` <1509720477-18936-20-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2017-11-07  6:15     ` Viresh Kumar
2017-11-03 14:47 ` [PATCH v4 20/20] cpufreq: scmi: add support for fast frequency switching Sudeep Holla
2017-11-07  6:19   ` Viresh Kumar
2017-11-07 10:57     ` Sudeep Holla
2017-11-08  0:24   ` Rafael J. Wysocki
     [not found]     ` <4588325.776kYim3Ci-yvgW3jdyMHm1GS7QM15AGw@public.gmane.org>
2017-11-08 10:42       ` Sudeep Holla
2017-11-08 11:05         ` Arnd Bergmann
2017-11-08 15:42           ` Sudeep Holla
     [not found]         ` <3f79f75f-1b6a-3f7b-b0c0-f970f0fb6c12-5wv7dgnIgG8@public.gmane.org>
2017-11-08 11:21           ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1509720477-18936-14-git-send-email-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=Ryan.Harkin@arm.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=harba@codeaurora.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=lho@apm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=roy.franz@cavium.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).