[PATCH v3 resend 0/1] Input: add support HiDeep touchscreen.

[Anthony Kim <anthony.kim@hideep.com>]

Hi All,

I remaked patch for dmitry's comment.
Please refer as follow.
http://www.spinics.net/lists/linux-input/msg53799.html

I changed our fw binary to big endian format and confirmed that our driver
code works well.

- v3
  - Reverted code for converts to big endian to previous version.
  - Changed part of variable order of dwz info structure to order of
    old version.

- v2
  - Our fw binary data is little endian, but our IC protocol for fw
    update use big endian. So it need to conert to big endian data
    and I added about it.
  - Changed PGM pattern value to big endian.
  - Changed to process for product code to using switch case.

Please review this.
Thanks!

Ps. I added to changes about code of previous version.

diff --git a/drivers/input/touchscreen/hideep.c b/drivers/input/touchscreen/hideep.c
index 1df0a43..4455a13 100644
--- a/drivers/input/touchscreen/hideep.c
+++ b/drivers/input/touchscreen/hideep.c
@@ -123,9 +123,9 @@ struct dwz_info {
	__be16 release_ver;
	__be16 custom_ver;
 
-	u8 model_name[6];
	u8 factory_id;
	u8 panel_type;
+	u8 model_name[6];
 
	__be16 extra_option;
	__be16 product_code;
@@ -408,7 +408,7 @@ static int hideep_check_status(struct hideep_ts *ts)
 }
 
 static int hideep_program_page(struct hideep_ts *ts, u32 addr,
-			       __be32 *ucode, size_t xfer_count)
+			       const __be32 *ucode, size_t xfer_count)
 {
	u32 val;
	int error;
@@ -457,15 +457,13 @@ static int hideep_program_page(struct hideep_ts *ts, u32 addr,
 }
 
 static int hideep_program_nvm(struct hideep_ts *ts,
-			      const u32 *ucode, size_t ucode_len)
+			      const __be32 *ucode, size_t ucode_len)
 {
	struct pgm_packet *packet_r = (void *)ts->xfer_buf;
	__be32 *current_ucode = packet_r->payload;
-	__be32 write_ucode[HIDEEP_NVM_PAGE_SIZE];
	size_t xfer_len;
	size_t xfer_count;
	u32 addr = 0;
-	int i;
	int error;
 
	hideep_nvm_unlock(ts);
@@ -483,14 +481,10 @@ static int hideep_program_nvm(struct hideep_ts *ts,
			return error;
		}
 
-		/* Need to because binary data is little endian */
-		for (i = 0; i < xfer_len; i++)
-			write_ucode[i] = cpu_to_be32(ucode[i]);
-
		/* See if the page needs updating */
-		if (memcmp(write_ucode, current_ucode, xfer_len)) {
+		if (memcmp(ucode, current_ucode, xfer_len)) {
			error = hideep_program_page(ts, addr,
-						    write_ucode, xfer_count);
+						    ucode, xfer_count);
			if (error) {
				dev_err(&ts->client->dev,
					"%s: iwrite failure @%#08x: %d\n",
@@ -510,11 +504,10 @@ static int hideep_program_nvm(struct hideep_ts *ts,
 }
 
 static int hideep_verify_nvm(struct hideep_ts *ts,
-			     const u32 *ucode, size_t ucode_len)
+			     const __be32 *ucode, size_t ucode_len)
 {
	struct pgm_packet *packet_r = (void *)ts->xfer_buf;
	__be32 *current_ucode = packet_r->payload;
-	__be32 verify_ucode[HIDEEP_NVM_PAGE_SIZE];
	size_t xfer_len;
	size_t xfer_count;
	u32 addr = 0;
@@ -534,12 +527,8 @@ static int hideep_verify_nvm(struct hideep_ts *ts,
			return error;
		}
 
-		/* Need to because binary data is little endian */
-		for (i = 0; i < xfer_len; i++)
-			verify_ucode[i] = cpu_to_be32(ucode[i]);
-
-		if (memcmp(verify_ucode, current_ucode, xfer_len)) {
-			const u8 *ucode_bytes = (const u8 *)verify_ucode;
+		if (memcmp(ucode, current_ucode, xfer_len)) {
+			const u8 *ucode_bytes = (const u8 *)ucode;
			const u8 *current_bytes = (const u8 *)current_ucode;
 
			for (i = 0; i < xfer_len; i++)
@@ -611,7 +600,7 @@ static int hideep_load_dwz(struct hideep_ts *ts)
 }
 
 static int hideep_flash_firmware(struct hideep_ts *ts,
-				 const u32 *ucode, size_t ucode_len)
+				 const __be32 *ucode, size_t ucode_len)
 {
	int retry_cnt = 3;
	int error;
@@ -629,7 +618,7 @@ static int hideep_flash_firmware(struct hideep_ts *ts,
 }
 
 static int hideep_update_firmware(struct hideep_ts *ts,
-				  const u32 *ucode, size_t ucode_len)
+				  const __be32 *ucode, size_t ucode_len)
 {
	int error, error2;
 
@@ -909,7 +898,7 @@ static ssize_t hideep_update_fw(struct device *dev,
	mutex_lock(&ts->dev_mutex);
	disable_irq(client->irq);
 
-	error = hideep_update_firmware(ts, (const u32 *)fw_entry->data,
+	error = hideep_update_firmware(ts, (const __be32 *)fw_entry->data,
				       fw_entry->size);
 
	enable_irq(client->irq);

Anthony Kim (1):
  Input: add support for HiDeep touchscreen

 .../bindings/input/touchscreen/hideep.txt          |   42 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/input/touchscreen/Kconfig                  |   11 +
 drivers/input/touchscreen/Makefile                 |    1 +
 drivers/input/touchscreen/hideep.c                 | 1120 ++++++++++++++++++++
 5 files changed, 1175 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hideep.txt
 create mode 100644 drivers/input/touchscreen/hideep.c

-- 
2.7.4