From: Fabio Estevam <festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Subject: [PATCH] ARM: dts: imx6: Remove unneeded address-cells/size-cells
Date: Fri, 10 Nov 2017 19:12:58 -0200 [thread overview]
Message-ID: <1510348378-18150-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
According to Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt:
"- #address-cells, #size-cells : Must be present if the device has
sub-nodes representing partitions."
Remove the occurrences of #address-cells/size-cells where no sub-nodes
representing partitions are present.
Signed-off-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
---
arch/arm/boot/dts/imx6q-cm-fx6.dts | 2 --
arch/arm/boot/dts/imx6q-mccmon6.dts | 2 --
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 --
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 --
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 --
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 --
arch/arm/boot/dts/imx6sl-evk.dts | 2 --
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ----
arch/arm/boot/dts/imx6sx-sdb.dts | 4 ----
9 files changed, 22 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index bc7587c..5df84e2 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -194,8 +194,6 @@
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "st,m25p", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index cab36f4..9636e15 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -90,8 +90,6 @@
status = "okay";
s25sl032p: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index 7d64075..d8f578c 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -106,8 +106,6 @@
status = "okay";
flash: m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 1b18728..5875252 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -136,8 +136,6 @@
status = "okay";
flash: m25p80@1 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 4fa2fac..828a9a5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -200,8 +200,6 @@
status = "disabled"; /* pin conflict with WEIM NOR */
flash: m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0a50705..acb0292 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -196,8 +196,6 @@
status = "okay";
flash: m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 60600b4..03a2240 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -123,8 +123,6 @@
status = "okay";
flash: m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index e3533e7..ebbed57 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -127,16 +127,12 @@
flash0: s25fl128s@0 {
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl128s", "jedec,spi-nor";
spi-max-frequency = <66000000>;
};
flash1: s25fl128s@1 {
reg = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl128s", "jedec,spi-nor";
spi-max-frequency = <66000000>;
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 6dd9beb..4b7481a 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -113,16 +113,12 @@
status = "okay";
flash0: n25q256a@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <0>;
};
flash1: n25q256a@1 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <1>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-11-10 21:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-10 21:12 Fabio Estevam [this message]
2017-11-11 14:24 ` [PATCH] ARM: dts: imx6: Remove unneeded address-cells/size-cells Christopher Spinrath
[not found] ` <62f3cb01-ff85-0fe0-2afa-0fe4732a7421-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
2017-11-12 12:14 ` Fabio Estevam
2017-11-13 7:55 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510348378-18150-1-git-send-email-festevam@gmail.com \
--to=festevam-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).