devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Gaignard <benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
	mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	alexandre.torgue-qxv4g6HH51o@public.gmane.org,
	daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
	ludovic.barre-qxv4g6HH51o@public.gmane.org,
	julien.thierry-5wv7dgnIgG8@public.gmane.org,
	sudeep.holla-5wv7dgnIgG8@public.gmane.org,
	arnd-r2nGTMty4D4@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Benjamin Gaignard
	<benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v8 2/6] clocksource: stm32: convert driver to timer_of
Date: Tue, 14 Nov 2017 09:52:39 +0100	[thread overview]
Message-ID: <1510649563-22975-3-git-send-email-benjamin.gaignard@linaro.org> (raw)
In-Reply-To: <1510649563-22975-1-git-send-email-benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Convert driver to use timer_of helpers. This allow to remove
custom proprietary structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/clocksource/Kconfig       |   1 +
 drivers/clocksource/timer-stm32.c | 160 ++++++++++++++------------------------
 2 files changed, 58 insertions(+), 103 deletions(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c729a88..28bc5595 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -269,6 +269,7 @@ config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
 	select CLKSRC_MMIO
+	select TIMER_OF
 
 config CLKSRC_MPS2
 	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index 8f24237..fc61fd1 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -17,6 +17,8 @@
 #include <linux/clk.h>
 #include <linux/reset.h>
 
+#include "timer-of.h"
+
 #define TIM_CR1		0x00
 #define TIM_DIER	0x0c
 #define TIM_SR		0x10
@@ -34,117 +36,84 @@
 
 #define TIM_EGR_UG	BIT(0)
 
-struct stm32_clock_event_ddata {
-	struct clock_event_device evtdev;
-	unsigned periodic_top;
-	void __iomem *base;
-};
-
-static int stm32_clock_event_shutdown(struct clock_event_device *evtdev)
+static int stm32_clock_event_shutdown(struct clock_event_device *evt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
-	void *base = data->base;
+	struct timer_of *to = to_timer_of(evt);
 
-	writel_relaxed(0, base + TIM_CR1);
+	writel_relaxed(0, timer_of_base(to) + TIM_CR1);
 	return 0;
 }
 
-static int stm32_clock_event_set_periodic(struct clock_event_device *evtdev)
+static int stm32_clock_event_set_periodic(struct clock_event_device *evt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
-	void *base = data->base;
+	struct timer_of *to = to_timer_of(evt);
+
+	writel_relaxed(timer_of_period(to), timer_of_base(to) + TIM_ARR);
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, timer_of_base(to) + TIM_CR1);
 
-	writel_relaxed(data->periodic_top, base + TIM_ARR);
-	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
 	return 0;
 }
 
 static int stm32_clock_event_set_next_event(unsigned long evt,
-					    struct clock_event_device *evtdev)
+					    struct clock_event_device *clkevt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+	struct timer_of *to = to_timer_of(clkevt);
 
-	writel_relaxed(evt, data->base + TIM_ARR);
+	writel_relaxed(evt, timer_of_base(to) + TIM_ARR);
 	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN,
-		       data->base + TIM_CR1);
+		       timer_of_base(to) + TIM_CR1);
 
 	return 0;
 }
 
 static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
 {
-	struct stm32_clock_event_ddata *data = dev_id;
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+	struct timer_of *to = to_timer_of(evt);
 
-	writel_relaxed(0, data->base + TIM_SR);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
 
-	data->evtdev.event_handler(&data->evtdev);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }
 
-static struct stm32_clock_event_ddata clock_event_ddata = {
-	.evtdev = {
-		.name = "stm32 clockevent",
-		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-		.set_state_shutdown = stm32_clock_event_shutdown,
-		.set_state_periodic = stm32_clock_event_set_periodic,
-		.set_state_oneshot = stm32_clock_event_shutdown,
-		.tick_resume = stm32_clock_event_shutdown,
-		.set_next_event = stm32_clock_event_set_next_event,
-		.rating = 200,
-	},
-};
-
-static int __init stm32_clockevent_init(struct device_node *np)
+static int __init stm32_clockevent_init(struct device_node *node)
 {
-	struct stm32_clock_event_ddata *data = &clock_event_ddata;
-	struct clk *clk;
 	struct reset_control *rstc;
-	unsigned long rate, max_delta;
-	int irq, ret, bits, prescaler = 1;
-
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		pr_err("failed to get clock for clockevent (%d)\n", ret);
-		goto err_clk_get;
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		pr_err("failed to enable timer clock for clockevent (%d)\n",
-		       ret);
-		goto err_clk_enable;
-	}
-
-	rate = clk_get_rate(clk);
-
-	rstc = of_reset_control_get(np, NULL);
+	unsigned long max_delta;
+	int ret, bits, prescaler = 1;
+	struct timer_of *to;
+
+	to = kzalloc(sizeof(*to), GFP_KERNEL);
+	if (!to)
+		return -ENOMEM;
+
+	to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
+	to->clkevt.name = "stm32_clockevent";
+	to->clkevt.rating = 200;
+	to->clkevt.features = CLOCK_EVT_FEAT_PERIODIC;
+	to->clkevt.set_state_shutdown = stm32_clock_event_shutdown;
+	to->clkevt.set_state_periodic = stm32_clock_event_set_periodic;
+	to->clkevt.set_state_oneshot = stm32_clock_event_shutdown;
+	to->clkevt.tick_resume = stm32_clock_event_shutdown;
+	to->clkevt.set_next_event = stm32_clock_event_set_next_event;
+
+	to->of_irq.handler = stm32_clock_event_handler;
+
+	ret = timer_of_init(node, to);
+	if (ret)
+		goto err;
+
+	rstc = of_reset_control_get(node, NULL);
 	if (!IS_ERR(rstc)) {
 		reset_control_assert(rstc);
 		reset_control_deassert(rstc);
 	}
 
-	data->base = of_iomap(np, 0);
-	if (!data->base) {
-		ret = -ENXIO;
-		pr_err("failed to map registers for clockevent\n");
-		goto err_iomap;
-	}
-
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		ret = -EINVAL;
-		pr_err("%pOF: failed to get irq.\n", np);
-		goto err_get_irq;
-	}
-
 	/* Detect whether the timer is 16 or 32 bits */
-	writel_relaxed(~0U, data->base + TIM_ARR);
-	max_delta = readl_relaxed(data->base + TIM_ARR);
+	writel_relaxed(~0U, timer_of_base(to) + TIM_ARR);
+	max_delta = readl_relaxed(timer_of_base(to) + TIM_ARR);
 	if (max_delta == ~0U) {
 		prescaler = 1;
 		bits = 32;
@@ -152,38 +121,23 @@ static int __init stm32_clockevent_init(struct device_node *np)
 		prescaler = 1024;
 		bits = 16;
 	}
-	writel_relaxed(0, data->base + TIM_ARR);
-
-	writel_relaxed(prescaler - 1, data->base + TIM_PSC);
-	writel_relaxed(TIM_EGR_UG, data->base + TIM_EGR);
-	writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER);
-	writel_relaxed(0, data->base + TIM_SR);
+	writel_relaxed(0, timer_of_base(to) + TIM_ARR);
 
-	data->periodic_top = DIV_ROUND_CLOSEST(rate, prescaler * HZ);
+	writel_relaxed(prescaler - 1, timer_of_base(to) + TIM_PSC);
+	writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
+	writel_relaxed(TIM_DIER_UIE, timer_of_base(to) + TIM_DIER);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
 
-	clockevents_config_and_register(&data->evtdev,
-					DIV_ROUND_CLOSEST(rate, prescaler),
-					0x1, max_delta);
-
-	ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
-			"stm32 clockevent", data);
-	if (ret) {
-		pr_err("%pOF: failed to request irq.\n", np);
-		goto err_get_irq;
-	}
+	clockevents_config_and_register(&to->clkevt,
+					timer_of_period(to), 0x1, max_delta);
 
 	pr_info("%pOF: STM32 clockevent driver initialized (%d bits)\n",
-			np, bits);
+			node, bits);
 
-	return ret;
+	return 0;
 
-err_get_irq:
-	iounmap(data->base);
-err_iomap:
-	clk_disable_unprepare(clk);
-err_clk_enable:
-	clk_put(clk);
-err_clk_get:
+err:
+	kfree(to);
 	return ret;
 }
 
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-11-14  8:52 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-14  8:52 [PATCH v8 0/6] stm32 clocksource driver rework Benjamin Gaignard
     [not found] ` <1510649563-22975-1-git-send-email-benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-11-14  8:52   ` [PATCH v8 1/6] clocksource: timer_of: rename timer_of_exit to timer_of_cleanup Benjamin Gaignard
2017-11-14  8:52   ` Benjamin Gaignard [this message]
2017-11-14  8:52   ` [PATCH v8 3/6] clocksource: stm32: increase min delta value Benjamin Gaignard
2017-12-08  9:28     ` Daniel Lezcano
2017-11-14  8:52   ` [PATCH v8 4/6] clocksource: stm32: only use 32 bits timers Benjamin Gaignard
     [not found]     ` <1510649563-22975-5-git-send-email-benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-12-07 15:27       ` Daniel Lezcano
2017-12-07 16:33         ` Benjamin Gaignard
2017-12-07 16:49           ` Daniel Lezcano
2017-12-07 20:36             ` Benjamin Gaignard
     [not found]               ` <CA+M3ks4KLy0VkJOSGR7tmefOT1rw9nrMsRQvwwK-YZQ7Gm7hQA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-08  7:52                 ` Daniel Lezcano
2017-12-08  8:34       ` Daniel Lezcano
     [not found]         ` <f22fd299-a742-1144-75d0-256a538af619-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-12-08  9:25           ` Benjamin Gaignard
     [not found]             ` <CA+M3ks6Co2LxQ=EPODvwYrxmoRqiiQBr3Li4L3Nx3RY2As58dg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-08  9:29               ` Daniel Lezcano
     [not found]                 ` <56ba2617-ab7b-9715-928e-c922c1b32866-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-12-08  9:31                   ` Benjamin Gaignard
2017-11-14  8:52   ` [PATCH v8 5/6] clocksource: stm32: add clocksource support Benjamin Gaignard
2017-11-14  8:52   ` [PATCH v8 6/6] arm: dts: stm32: remove useless clocksource nodes Benjamin Gaignard
2017-11-27 10:44 ` [PATCH v8 0/6] stm32 clocksource driver rework Benjamin Gaignard
2017-12-05 10:12 ` Alexandre Torgue
2017-12-05 10:15   ` Daniel Lezcano
2017-12-05 10:16     ` Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1510649563-22975-3-git-send-email-benjamin.gaignard@linaro.org \
    --to=benjamin.gaignard-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
    --cc=alexandre.torgue-qxv4g6HH51o@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=julien.thierry-5wv7dgnIgG8@public.gmane.org \
    --cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=ludovic.barre-qxv4g6HH51o@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sudeep.holla-5wv7dgnIgG8@public.gmane.org \
    --cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).