From: Jim Quinlan <jim2101024-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Robin Murphy <robin.murphy-5wv7dgnIgG8@public.gmane.org>,
Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Jonas Gorski
<jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
Gregory Fong
<gregory.0xf0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
Jim Quinlan <jim2101024-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 7/8] MIPS: BMIPS: Add PCI bindings for 7425, 7435
Date: Tue, 14 Nov 2017 17:12:11 -0500 [thread overview]
Message-ID: <1510697532-32828-8-git-send-email-jim2101024@gmail.com> (raw)
In-Reply-To: <1510697532-32828-1-git-send-email-jim2101024-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Adds the PCIe nodes for the Broadcom STB PCIe root complex.
Signed-off-by: Jim Quinlan <jim2101024-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/mips/boot/dts/brcm/bcm7425.dtsi | 26 ++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7435.dtsi | 27 +++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm97425svmb.dts | 4 ++++
arch/mips/boot/dts/brcm/bcm97435svmb.dts | 4 ++++
4 files changed, 61 insertions(+)
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index f56fb25..c7bd88b 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -494,4 +494,30 @@
status = "disabled";
};
};
+
+ pcie: pcie@10410000 {
+ reg = <0x10410000 0x830c>;
+ compatible = "brcm,bcm7425-pcie";
+ interrupts = <37>, <37>;
+ interrupt-names = "pcie", "msi";
+ interrupt-parent = <&periph_intc>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ linux,pci-domain = <0>;
+ brcm,enable-ssc;
+ bus-range = <0x00 0xff>;
+ msi-controller;
+ #interrupt-cells = <1>;
+ /* 4x128mb windows */
+ ranges = <0x2000000 0x0 0xd0000000 0xd0000000 0 0x08000000>,
+ <0x2000000 0x0 0xd8000000 0xd8000000 0 0x08000000>,
+ <0x2000000 0x0 0xe0000000 0xe0000000 0 0x08000000>,
+ <0x2000000 0x0 0xe8000000 0xe8000000 0 0x08000000>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &periph_intc 33
+ 0 0 0 2 &periph_intc 34
+ 0 0 0 3 &periph_intc 35
+ 0 0 0 4 &periph_intc 36>;
+ };
+
};
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index f2cead2..d321042 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -509,4 +509,31 @@
status = "disabled";
};
};
+
+ pcie: pcie@10410000 {
+ reg = <0x10410000 0x930c>;
+ interrupts = <0x27>, <0x27>;
+ interrupt-names = "pcie", "msi";
+ interrupt-parent = <&periph_intc>;
+ compatible = "brcm,bcm7435-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ linux,pci-domain = <0>;
+ brcm,enable-ssc;
+ bus-range = <0x00 0xff>;
+ msi-controller;
+ #interrupt-cells = <1>;
+ /* 4x128mb windows */
+ ranges = <0x2000000 0x0 0xd0000000 0xd0000000 0 0x08000000>,
+ <0x2000000 0x0 0xd8000000 0xd8000000 0 0x08000000>,
+ <0x2000000 0x0 0xe0000000 0xe0000000 0 0x08000000>,
+ <0x2000000 0x0 0xe8000000 0xe8000000 0 0x08000000>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &periph_intc 35
+ 0 0 0 2 &periph_intc 36
+ 0 0 0 3 &periph_intc 37
+ 0 0 0 4 &periph_intc 38>;
+ status = "disabled";
+ };
+
};
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 73aa006..3a87ac5 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -143,3 +143,7 @@
&mspi {
status = "okay";
};
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 0a915f3..456d024 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -119,3 +119,7 @@
&mspi {
status = "okay";
};
+
+&pcie {
+ status = "okay";
+};
--
1.9.0.138.g2de3478
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-11-14 22:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-14 22:12 [PATCH v3 0/8] PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) Jim Quinlan
2017-11-14 22:12 ` [PATCH v3 3/8] PCI: brcmstb: Add Broadcom STB PCIe host controller driver Jim Quinlan
[not found] ` <1510697532-32828-4-git-send-email-jim2101024-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-12-12 22:16 ` Bjorn Helgaas
[not found] ` <20171212221642.GB95453-1RhO1Y9PlrlHTL0Zs8A6p5iNqAH0jzoTYJqu5kTmcBRl57MIdRCFDg@public.gmane.org>
2017-12-13 23:53 ` Jim Quinlan
[not found] ` <CANCKTBvtqNWZYXpLdUnEWwA2=14XhJ6adR5muOAYubY_1SxZWw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-14 22:51 ` Bjorn Helgaas
2017-12-15 19:53 ` Jim Quinlan
[not found] ` <CANCKTBvFhHb57JdG01aiSypBAcUeLzY3Dhuh5xP-_F5k_NcAhA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-15 20:14 ` Bjorn Helgaas
2017-12-14 20:30 ` Jim Quinlan
2017-11-14 22:12 ` [PATCH v3 4/8] PCI: brcmstb: Add dma-range mapping for inbound traffic Jim Quinlan
[not found] ` <1510697532-32828-5-git-send-email-jim2101024-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-12-12 22:32 ` Bjorn Helgaas
2017-11-14 22:12 ` [PATCH v3 5/8] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for MIPS Jim Quinlan
2017-11-14 22:12 ` [PATCH v3 6/8] PCI: brcmstb: Add MSI capability Jim Quinlan
[not found] ` <1510697532-32828-7-git-send-email-jim2101024-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-12-12 22:43 ` Bjorn Helgaas
[not found] ` <1510697532-32828-1-git-send-email-jim2101024-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-11-14 22:12 ` [PATCH v3 1/8] SOC: brcmstb: add memory API Jim Quinlan
2017-12-05 20:59 ` Bjorn Helgaas
[not found] ` <20171205205926.GJ23510-1RhO1Y9PlrlHTL0Zs8A6p5iNqAH0jzoTYJqu5kTmcBRl57MIdRCFDg@public.gmane.org>
2017-12-08 23:28 ` Florian Fainelli
2017-12-12 20:53 ` Jim Quinlan
2017-12-12 21:14 ` Bjorn Helgaas
2017-12-15 17:14 ` Lorenzo Pieralisi
2017-12-15 19:50 ` Jim Quinlan
2017-11-14 22:12 ` [PATCH v3 2/8] dt-bindings: pci: Add DT docs for Brcmstb PCIe device Jim Quinlan
2017-11-16 5:07 ` Rob Herring
2017-11-14 22:12 ` Jim Quinlan [this message]
2017-11-14 22:12 ` [PATCH v3 8/8] MIPS: BMIPS: Enable PCI Jim Quinlan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510697532-32828-8-git-send-email-jim2101024@gmail.com \
--to=jim2101024-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=gregory.0xf0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=hch-jcswGhMUV9g@public.gmane.org \
--cc=jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=robin.murphy-5wv7dgnIgG8@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).