From: Stefan Mavrodiev <stefan@olimex.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: linux-sunxi@googlegroups.com, Stefan Mavrodiev <stefan@olimex.com>
Subject: [PATCH 1/1] ARM: dts: sunxi: Update dts for A20-OLinuXino boards
Date: Mon, 27 Nov 2017 14:03:51 +0200 [thread overview]
Message-ID: <1511784231-6485-1-git-send-email-stefan@olimex.com> (raw)
There will be option with 16MB flash for the following boards:
* A20-OLinuXino-MICRO Rev.K
* A20-OLinuXino-LIME Rev.J
* A20-OLinuXino-LIME2 Rev.J
* A20-SOM-EVB Rev.E
The used flash chip is Winbond W25Q128FV, which is connected to
SPI0 port. Since this is optional feature, spi0 node is dissabled
by default. Also this option is incompatible with NAND flash, so
they shouldn't be enabled at the same time.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 14 ++++++++++++++
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 14 ++++++++++++++
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 14 ++++++++++++++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 14 ++++++++++++++
4 files changed, 56 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index 64c8ef9..98b7697 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -291,6 +291,20 @@
status = "okay";
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_b>,<&spi0_cs0_pins_b>;
+ status = "disabled";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128","jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>,
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index edf9c3c..354af5d 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -218,6 +218,20 @@
status = "okay";
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_b>,<&spi0_cs0_pins_b>;
+ status = "disabled";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128","jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index ba25018..6fcdd6e 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -268,6 +268,20 @@
status = "okay";
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_b>,<&spi0_cs0_pins_b>;
+ status = "disabled";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128","jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index dffbaa2..db85895 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -331,6 +331,20 @@
status = "okay";
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_b>,<&spi0_cs0_pins_b>;
+ status = "disabled";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128","jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>,
--
2.7.4
next reply other threads:[~2017-11-27 12:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-27 12:03 Stefan Mavrodiev [this message]
[not found] ` <1511784231-6485-1-git-send-email-stefan-kyXcfZUBQGPQT0dZR+AlfA@public.gmane.org>
2017-11-28 21:32 ` [PATCH 1/1] ARM: dts: sunxi: Update dts for A20-OLinuXino boards Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511784231-6485-1-git-send-email-stefan@olimex.com \
--to=stefan@olimex.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox