From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Zhi Mao <zhi.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
claudiu.beznea-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
yt.shen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
zhenbao.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org
Subject: Re: [PATCH v7 1/1] pwm: mediatek: add MT2712/MT7622 support
Date: Tue, 28 Nov 2017 14:39:26 +0800 [thread overview]
Message-ID: <1511851166.28444.1.camel@mtkswgap22> (raw)
In-Reply-To: <1510576744.12324.23.camel@mhfsdcap03>
Hi, Zhi
The patch have already got merged in 4.15 rc1 as
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=424268c7494c2ae24c95565b9047bbf30309e88a
Sean
On Mon, 2017-11-13 at 20:39 +0800, Zhi Mao wrote:
> Hi Thierry,
>
> Just have a ping for this patch.
>
> Regards
> Zhi
>
>
> On Wed, 2017-10-25 at 18:11 +0800, Zhi Mao wrote:
> > Add support to MT2712 and MT7622.
> > Due to register offset address of pwm7 for MT2712 is not fixed 0x40,
> > add mtk_pwm_reg_offset array for pwm register offset.
> >
> > Reviewed-by: Claudiu Beznea <claudiu.beznea-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
> > Reviewed-by: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Signed-off-by: Zhi Mao <zhi.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > ---
> > changee in v7:
> > - adjust the commit message
> >
> > Changes in v6:
> > - remove "struct mtk_pwm_platform_data" member from "mtk_pwm_chip".
> >
> > Changes in v5:
> > - Add NULL pointer checking for "data"
> >
> > drivers/pwm/pwm-mediatek.c | 53 ++++++++++++++++++++++++++++++++++++--------
> > 1 file changed, 44 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> > index 1d78ab1..cdd4d31 100644
> > --- a/drivers/pwm/pwm-mediatek.c
> > +++ b/drivers/pwm/pwm-mediatek.c
> > @@ -16,6 +16,7 @@
> > #include <linux/module.h>
> > #include <linux/clk.h>
> > #include <linux/of.h>
> > +#include <linux/of_device.h>
> > #include <linux/platform_device.h>
> > #include <linux/pwm.h>
> > #include <linux/slab.h>
> > @@ -40,11 +41,19 @@ enum {
> > MTK_CLK_PWM3,
> > MTK_CLK_PWM4,
> > MTK_CLK_PWM5,
> > + MTK_CLK_PWM6,
> > + MTK_CLK_PWM7,
> > + MTK_CLK_PWM8,
> > MTK_CLK_MAX,
> > };
> >
> > -static const char * const mtk_pwm_clk_name[] = {
> > - "main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5"
> > +static const char * const mtk_pwm_clk_name[MTK_CLK_MAX] = {
> > + "main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5", "pwm6", "pwm7",
> > + "pwm8"
> > +};
> > +
> > +struct mtk_pwm_platform_data {
> > + unsigned int num_pwms;
> > };
> >
> > /**
> > @@ -59,6 +68,10 @@ struct mtk_pwm_chip {
> > struct clk *clks[MTK_CLK_MAX];
> > };
> >
> > +static const unsigned int mtk_pwm_reg_offset[] = {
> > + 0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
> > +};
> > +
> > static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
> > {
> > return container_of(chip, struct mtk_pwm_chip, chip);
> > @@ -103,14 +116,14 @@ static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> > static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
> > unsigned int offset)
> > {
> > - return readl(chip->regs + 0x10 + (num * 0x40) + offset);
> > + return readl(chip->regs + mtk_pwm_reg_offset[num] + offset);
> > }
> >
> > static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
> > unsigned int num, unsigned int offset,
> > u32 value)
> > {
> > - writel(value, chip->regs + 0x10 + (num * 0x40) + offset);
> > + writel(value, chip->regs + mtk_pwm_reg_offset[num] + offset);
> > }
> >
> > static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> > @@ -185,6 +198,7 @@ static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> >
> > static int mtk_pwm_probe(struct platform_device *pdev)
> > {
> > + const struct mtk_pwm_platform_data *data;
> > struct mtk_pwm_chip *pc;
> > struct resource *res;
> > unsigned int i;
> > @@ -194,15 +208,22 @@ static int mtk_pwm_probe(struct platform_device *pdev)
> > if (!pc)
> > return -ENOMEM;
> >
> > + data = of_device_get_match_data(&pdev->dev);
> > + if (data == NULL)
> > + return -EINVAL;
> > +
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > pc->regs = devm_ioremap_resource(&pdev->dev, res);
> > if (IS_ERR(pc->regs))
> > return PTR_ERR(pc->regs);
> >
> > - for (i = 0; i < MTK_CLK_MAX; i++) {
> > + for (i = 0; i < data->num_pwms + 2; i++) {
> > pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
> > - if (IS_ERR(pc->clks[i]))
> > + if (IS_ERR(pc->clks[i])) {
> > + dev_err(&pdev->dev, "clock: %s fail: %ld\n",
> > + mtk_pwm_clk_name[i], PTR_ERR(pc->clks[i]));
> > return PTR_ERR(pc->clks[i]);
> > + }
> > }
> >
> > platform_set_drvdata(pdev, pc);
> > @@ -210,7 +231,7 @@ static int mtk_pwm_probe(struct platform_device *pdev)
> > pc->chip.dev = &pdev->dev;
> > pc->chip.ops = &mtk_pwm_ops;
> > pc->chip.base = -1;
> > - pc->chip.npwm = 5;
> > + pc->chip.npwm = data->num_pwms;
> >
> > ret = pwmchip_add(&pc->chip);
> > if (ret < 0) {
> > @@ -228,9 +249,23 @@ static int mtk_pwm_remove(struct platform_device *pdev)
> > return pwmchip_remove(&pc->chip);
> > }
> >
> > +static const struct mtk_pwm_platform_data mt2712_pwm_data = {
> > + .num_pwms = 8,
> > +};
> > +
> > +static const struct mtk_pwm_platform_data mt7622_pwm_data = {
> > + .num_pwms = 6,
> > +};
> > +
> > +static const struct mtk_pwm_platform_data mt7623_pwm_data = {
> > + .num_pwms = 5,
> > +};
> > +
> > static const struct of_device_id mtk_pwm_of_match[] = {
> > - { .compatible = "mediatek,mt7623-pwm" },
> > - { }
> > + { .compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data },
> > + { .compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data },
> > + { .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
> > + { },
> > };
> > MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2017-11-28 6:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 10:11 [PATCH v7 1/1] pwm: mediatek: add MT2712/MT7622 support Zhi Mao
2017-11-13 12:39 ` Zhi Mao
2017-11-28 6:39 ` Sean Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511851166.28444.1.camel@mtkswgap22 \
--to=sean.wang-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=claudiu.beznea-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=yt.shen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=zhenbao.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=zhi.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).