[PATCH] [linux][master][v1] devicetree: misc: Add binding for logicoreIP xlnx,vcu

[Dhaval Shah <dhaval.shah-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>]

From: Dhaval Shah <dhaval.shah-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>

Added the txt file which contain the xlnx,vcu DT node
properties information. This also provides the information
of it's child node as well.

Signed-off-by: Dhaval Shah <dshah-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
---
 .../devicetree/bindings/misc/xlnx,vcu.txt          | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,vcu.txt

diff --git a/Documentation/devicetree/bindings/misc/xlnx,vcu.txt b/Documentation/devicetree/bindings/misc/xlnx,vcu.txt
new file mode 100644
index 0000000..e722ff3
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,vcu.txt
@@ -0,0 +1,59 @@
+Xilinx VCU init Driver
+-----------------------------
+
+General concept
+---------------
+
+Xilinx VCU init driver is developed to handle the LogiCore related
+new implementation. In this directory, The DT node of the Xilinx
+VCU init driver represents as a top level node.
+
+Required properties:
+- compatible: Must be "xlnx,vcu".
+- reg, reg-names: There are two sets of registers need to provide.
+	1. vcu slcr
+	2. Logicore
+	reg-names should contain name for the each register sequence.
+- clocks: phandle for aclk and pll_ref clocksource
+- clock-names: The identification string, "aclk", is always required for
+   the axi clock. "pll_ref" is required for pll.
+- ranges
+- VCU Init driver node define the following child nodes:
+	* Allegro encoder driver node
+		- compatible: Must be "al,al5e"
+		- reg: There is a one set of register.
+		- interrupts: interrupt number to the cpu.
+		- interrupt-parent: the phandle for the interrupt controller
+		  that services interrupts for this device.
+	* Allegro decoder driver node
+		- compatible: Must be "al,al5d"
+		- reg: There is a one set of register.
+		- interrupts: interrupt number to the cpu.
+		- interrupt-parent: the phandle for the interrupt controller
+		  that services interrupts for this device.
+Example:
+
+	xlnx_vcu: vcu@a0040000 {
+		compatible = "xlnx,vcu";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0xa0040000 0x0 0x1000>,
+			 <0x0 0xa0041000 0x0 0x1000>;
+		reg-names = "vcu_slcr", "logicore";
+		clocks = <&si570_1>, <&clkc 71>;
+		clock-names = "pll_ref", "aclk";
+		ranges;
+		encoder: al5e@a0000000 {
+			compatible = "al,al5e";
+			reg = <0x0 0xa0000000 0x0 0x10000>;
+			interrupts = <0 89 4>;
+			interrupt-parent = <&gic>;
+		};
+
+		decoder: al5d@a0020000 {
+			compatible = "al,al5d";
+			reg = <0x0 0xa0020000 0x0 0x10000>;
+			interrupts = <0 89 4>;
+			interrupt-parent = <&gic>;
+		};
+	};
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html