[PATCH 10/20] ARM: dts: dra7: add bus functionality to base PRCM nodes

[Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>]

Add simple-bus compatibility and ranges properties to cm1, cm2 and prm
nodes. This is done in preparation of adding the support for clkctrl
nodes.

SPLIT: timer1 fck setup

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/dra7.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index c538e2f..5e24cea 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -224,8 +224,12 @@
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
-				compatible = "ti,dra7-cm-core-aon";
+				compatible = "ti,dra7-cm-core-aon",
+					      "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x5000 0x2000>;
+				ranges = <0 0x5000 0x2000>;
 
 				cm_core_aon_clocks: clocks {
 					#address-cells = <1>;
@@ -237,8 +241,11 @@
 			};
 
 			cm_core: cm_core@8000 {
-				compatible = "ti,dra7-cm-core";
+				compatible = "ti,dra7-cm-core", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x8000 0x3000>;
+				ranges = <0 0x8000 0x3000>;
 
 				cm_core_clocks: clocks {
 					#address-cells = <1>;
@@ -263,9 +270,12 @@
 			};
 
 			prm: prm@6000 {
-				compatible = "ti,dra7-prm";
+				compatible = "ti,dra7-prm", "simple-bus";
 				reg = <0x6000 0x3000>;
 				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x6000 0x3000>;
 
 				prm_clocks: clocks {
 					#address-cells = <1>;
-- 
1.9.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html