From: Abhishek Sahu <absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Andy Gross <andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
David Brown <david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Abhishek Sahu <absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v2 09/11] clk: qcom: ipq8074: add GP and Crypto clocks
Date: Wed, 13 Dec 2017 19:55:40 +0530 [thread overview]
Message-ID: <1513175142-3702-10-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1513175142-3702-1-git-send-email-absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
- It has 3 general purpose clock controller which supplies
the clock in GPIO pins.
- It has Crypto Engine which has AXI, AHB and Core clocks.
Other non APSS processors can also use Crypto Engine so
these clocks are marked as VOTED clocks.
Signed-off-by: Abhishek Sahu <absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
drivers/clk/qcom/gcc-ipq8074.c | 199 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 199 insertions(+)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index be919bb..3aad6bc 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -390,6 +390,22 @@ enum {
{ P_BIAS_PLL, 6 },
};
+static const char * const gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = {
+ "xo",
+ "gpll0",
+ "gpll6",
+ "gpll0_out_main_div2",
+ "sleep_clk",
+};
+
+static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = {
+ { P_XO, 0 },
+ { P_GPLL0, 1 },
+ { P_GPLL6, 2 },
+ { P_GPLL0_DIV2, 4 },
+ { P_SLEEP_CLK, 6 },
+};
+
static struct clk_alpha_pll gpll0_main = {
.offset = 0x21000,
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
@@ -1939,6 +1955,74 @@ enum {
},
};
+static struct freq_tbl ftbl_crypto_clk_src[] = {
+ F(40000000, P_GPLL0_DIV2, 10, 0, 0),
+ F(80000000, P_GPLL0, 10, 0, 0),
+ F(100000000, P_GPLL0, 8, 0, 0),
+ F(160000000, P_GPLL0, 5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 crypto_clk_src = {
+ .cmd_rcgr = 0x16004,
+ .freq_tbl = ftbl_crypto_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "crypto_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_gp_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gp1_clk_src = {
+ .cmd_rcgr = 0x08004,
+ .freq_tbl = ftbl_gp_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gp1_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gp2_clk_src = {
+ .cmd_rcgr = 0x09004,
+ .freq_tbl = ftbl_gp_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gp2_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gp3_clk_src = {
+ .cmd_rcgr = 0x0a004,
+ .freq_tbl = ftbl_gp_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gp3_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
static struct clk_branch gcc_blsp1_ahb_clk = {
.halt_reg = 0x01008,
.clkr = {
@@ -4137,6 +4221,111 @@ enum {
},
};
+static struct clk_branch gcc_crypto_ahb_clk = {
+ .halt_reg = 0x16024,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x0b004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_crypto_ahb_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_crypto_axi_clk = {
+ .halt_reg = 0x16020,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x0b004,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_crypto_axi_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_crypto_clk = {
+ .halt_reg = 0x1601c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x0b004,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_crypto_clk",
+ .parent_names = (const char *[]){
+ "crypto_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp1_clk = {
+ .halt_reg = 0x08000,
+ .clkr = {
+ .enable_reg = 0x08000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp1_clk",
+ .parent_names = (const char *[]){
+ "gp1_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp2_clk = {
+ .halt_reg = 0x09000,
+ .clkr = {
+ .enable_reg = 0x09000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp2_clk",
+ .parent_names = (const char *[]){
+ "gp2_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp3_clk = {
+ .halt_reg = 0x0a000,
+ .clkr = {
+ .enable_reg = 0x0a000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp3_clk",
+ .parent_names = (const char *[]){
+ "gp3_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_hw *gcc_ipq8074_hws[] = {
&gpll0_out_main_div2.hw,
&gpll6_out_main_div2.hw,
@@ -4233,6 +4422,10 @@ enum {
[NSS_PORT6_RX_DIV_CLK_SRC] = &nss_port6_rx_div_clk_src.clkr,
[NSS_PORT6_TX_CLK_SRC] = &nss_port6_tx_clk_src.clkr,
[NSS_PORT6_TX_DIV_CLK_SRC] = &nss_port6_tx_div_clk_src.clkr,
+ [CRYPTO_CLK_SRC] = &crypto_clk_src.clkr,
+ [GP1_CLK_SRC] = &gp1_clk_src.clkr,
+ [GP2_CLK_SRC] = &gp2_clk_src.clkr,
+ [GP3_CLK_SRC] = &gp3_clk_src.clkr,
[GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
[GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
[GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
@@ -4362,6 +4555,12 @@ enum {
[GCC_UNIPHY1_PORT5_TX_CLK] = &gcc_uniphy1_port5_tx_clk.clkr,
[GCC_UNIPHY2_PORT6_RX_CLK] = &gcc_uniphy2_port6_rx_clk.clkr,
[GCC_UNIPHY2_PORT6_TX_CLK] = &gcc_uniphy2_port6_tx_clk.clkr,
+ [GCC_CRYPTO_AHB_CLK] = &gcc_crypto_ahb_clk.clkr,
+ [GCC_CRYPTO_AXI_CLK] = &gcc_crypto_axi_clk.clkr,
+ [GCC_CRYPTO_CLK] = &gcc_crypto_clk.clkr,
+ [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+ [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+ [GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq8074_resets[] = {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-13 14:25 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-13 14:25 [PATCH v2 00/11] Add remaining clocks for QCOM IPQ8074 Abhishek Sahu
2017-12-13 14:25 ` [PATCH v2 02/11] clk: qcom: add parent map for regmap mux Abhishek Sahu
2017-12-22 0:23 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 03/11] clk: qcom: ipq8074: fix missing GPLL0 divider width Abhishek Sahu
2017-12-22 0:23 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 04/11] dt-bindings: clock: qcom: add remaining clocks for IPQ8074 Abhishek Sahu
2017-12-15 23:09 ` Rob Herring
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 08/11] clk: qcom: ipq8074: add NSS ethernet port clocks Abhishek Sahu
[not found] ` <1513175142-3702-9-git-send-email-absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-22 0:24 ` Stephen Boyd
[not found] ` <1513175142-3702-1-git-send-email-absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-13 14:25 ` [PATCH v2 01/11] clk: qcom: add read-only divider operations Abhishek Sahu
2017-12-22 0:23 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 05/11] clk: qcom: ipq8074: add remaining PLL’s Abhishek Sahu
2017-12-22 0:23 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 06/11] clk: qcom: ipq8074: add PCIE, USB and SDCC clocks Abhishek Sahu
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 07/11] clk: qcom: ipq8074: add NSS clocks Abhishek Sahu
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` Abhishek Sahu [this message]
2017-12-22 0:24 ` [PATCH v2 09/11] clk: qcom: ipq8074: add GP and Crypto clocks Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 10/11] dt-bindings: clock: qcom: add misc resets for PCIE and NSS Abhishek Sahu
[not found] ` <1513175142-3702-11-git-send-email-absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-15 23:10 ` Rob Herring
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 11/11] clk: qcom: ipq8074: " Abhishek Sahu
2017-12-22 0:24 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513175142-3702-10-git-send-email-absahu@codeaurora.org \
--to=absahu-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).