From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
robh+dt@kernel.org, Stefan Riedmueller <s.riedmueller@phytec.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] ARM: dts: Add PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira carrier board support
Date: Tue, 19 Dec 2017 16:49:42 +0100 [thread overview]
Message-ID: <1513698588-13325-1-git-send-email-s.riedmueller@phytec.de> (raw)
This patchset adds support for the PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira.
Following boards are included:
phyBOARD-Mira with phyCORE-i.MX 6 Quad/Dual with:
- i.MX 6Quad/Dual SOC
- NAND or eMMC
- HDMI interface
- LVDS display interface
- Gigabit Ethernet
- USB Host
- CAN
- RS232
- PCIe
This board also contains an LVDS camera interface and parallel display
interface which are not yet supported.
phyBAORD-Mira with phyCORE-i.MX 6 DualLight/Solo with:
- i.MX 6DualLight/Solo
- NAND
- HDMI interface
- 100 MBit/s Ethernet
- USB Host
- RS232
phyBOARD-Mira with phyCORE-i.MX 6 QuadPlus with:
- i.MX 6QuadPlus SOC
- NAND
- HDMI interface
- LVDS display interface
- Gigabit Ethernet
- USB Host
- CAN
- RS232
- PCIe
This board also contains an LVDS camera interface and parallel display
interface which are not yet supported.
The entire series is based on v4.15-rc4.
Christian Hemp (2):
ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK
ARM: dts: imx6: Add support for phxBOARD-Mira i.MX 6 DualLight/Solo
RDK
Enrico Scholz (1):
ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus
Stefan Riedmueller (3):
ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM
ARM: dts: imx6: Add initial support for phyBOARD-Mira
ARM: imx_v6_v7_defconfig: Enable Dialog Semicondocter DA9062 driver
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 64 ++++
arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 76 +++++
arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts | 76 +++++
arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi | 390 ++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 282 ++++++++++++++++
arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 76 +++++
arch/arm/configs/imx_v6_v7_defconfig | 4 +
8 files changed, 972 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
--
2.7.4
next reply other threads:[~2017-12-19 15:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 15:49 Stefan Riedmueller [this message]
2017-12-19 15:49 ` [PATCH 1/6] ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM Stefan Riedmueller
[not found] ` <1513698588-13325-2-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2017-12-19 17:03 ` Fabio Estevam
2017-12-19 15:49 ` [PATCH 2/6] ARM: dts: imx6: Add initial support for phyBOARD-Mira Stefan Riedmueller
[not found] ` <1513698588-13325-3-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2017-12-19 17:10 ` Fabio Estevam
[not found] ` <CAOMZO5CSQSpPXTnR69HqHfKZiUpi+eqonqjuEu9mgBECsWG_5g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-19 17:22 ` Christoph Fritz
2017-12-19 15:49 ` [PATCH 3/6] ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK Stefan Riedmueller
[not found] ` <1513698588-13325-4-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2017-12-19 17:12 ` Fabio Estevam
2017-12-19 15:49 ` [PATCH 4/6] ARM: dts: imx6: Add support for phxBOARD-Mira i.MX 6 DualLight/Solo RDK Stefan Riedmueller
[not found] ` <1513698588-13325-5-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2017-12-19 17:14 ` Fabio Estevam
2017-12-19 15:49 ` [PATCH 5/6] ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus Stefan Riedmueller
[not found] ` <1513698588-13325-6-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2017-12-19 17:15 ` Fabio Estevam
2017-12-19 15:49 ` [PATCH 6/6] ARM: imx_v6_v7_defconfig: Enable Dialog Semicondocter DA9062 driver Stefan Riedmueller
[not found] ` <1513698588-13325-7-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2017-12-19 17:16 ` Fabio Estevam
[not found] ` <CAOMZO5CyMoY+24ub09Lp4VHFn=O6FqFELfQzH-WDv1H9OweoHw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-19 17:32 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513698588-13325-1-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).