devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Faiz Abbas <faiz_abbas-l0cyMroinI0@public.gmane.org>
To: wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org,
	mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org
Cc: linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	faiz_abbas-l0cyMroinI0@public.gmane.org,
	nsekhar-l0cyMroinI0@public.gmane.org,
	fcooper-l0cyMroinI0@public.gmane.org,
	robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	Wenyou.Yang-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org,
	sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org
Subject: [PATCH v6 1/6] can: dev: Add support for limiting configured bitrate
Date: Fri, 22 Dec 2017 19:01:23 +0530	[thread overview]
Message-ID: <1513949488-13026-2-git-send-email-faiz_abbas@ti.com> (raw)
In-Reply-To: <1513949488-13026-1-git-send-email-faiz_abbas-l0cyMroinI0@public.gmane.org>

From: Franklin S Cooper Jr <fcooper-l0cyMroinI0@public.gmane.org>

Various CAN or CAN-FD IP may be able to run at a faster rate than
what the transceiver the CAN node is connected to. This can lead to
unexpected errors. However, CAN transceivers typically have fixed
limitations and provide no means to discover these limitations at
runtime. Therefore, add support for a can-transceiver node that
can be reused by other CAN peripheral drivers to determine for both
CAN and CAN-FD what the max bitrate that can be used. If the user
tries to configure CAN to pass these maximum bitrates it will throw
an error.

Signed-off-by: Franklin S Cooper Jr <fcooper-l0cyMroinI0@public.gmane.org>
[nsekhar-l0cyMroinI0@public.gmane.org: fix build error with !CONFIG_OF]
Signed-off-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
Signed-off-by: Faiz Abbas <faiz_abbas-l0cyMroinI0@public.gmane.org>
---
v6 changes:
fix build error with !CONFIG_OF

 drivers/net/can/dev.c   | 39 +++++++++++++++++++++++++++++++++++++++
 include/linux/can/dev.h |  8 ++++++++
 2 files changed, 47 insertions(+)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 365a8cc..007cfc0 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -27,6 +27,7 @@
 #include <linux/can/skb.h>
 #include <linux/can/netlink.h>
 #include <linux/can/led.h>
+#include <linux/of.h>
 #include <net/rtnetlink.h>
 
 #define MOD_DESC "CAN device driver interface"
@@ -814,6 +815,30 @@ int open_candev(struct net_device *dev)
 }
 EXPORT_SYMBOL_GPL(open_candev);
 
+#ifdef CONFIG_OF
+/*
+ * Common function that can be used to understand the limitation of
+ * a transceiver when it provides no means to determine these limitations
+ * at runtime.
+ */
+void of_can_transceiver(struct net_device *dev)
+{
+	struct device_node *dn;
+	struct can_priv *priv = netdev_priv(dev);
+	struct device_node *np = dev->dev.parent->of_node;
+	int ret;
+
+	dn = of_get_child_by_name(np, "can-transceiver");
+	if (!dn)
+		return;
+
+	ret = of_property_read_u32(dn, "max-bitrate", &priv->max_bitrate);
+	if ((ret && ret != -EINVAL) || (!ret && !priv->max_bitrate))
+		netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n");
+}
+EXPORT_SYMBOL_GPL(of_can_transceiver);
+#endif
+
 /*
  * Common close function for cleanup before the device gets closed.
  *
@@ -913,6 +938,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 					priv->bitrate_const_cnt);
 		if (err)
 			return err;
+
+		if (priv->max_bitrate && bt.bitrate > priv->max_bitrate) {
+			netdev_err(dev, "arbitration bitrate surpasses transceiver capabilities of %d bps\n",
+				   priv->max_bitrate);
+			return -EINVAL;
+		}
+
 		memcpy(&priv->bittiming, &bt, sizeof(bt));
 
 		if (priv->do_set_bittiming) {
@@ -997,6 +1029,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 					priv->data_bitrate_const_cnt);
 		if (err)
 			return err;
+
+		if (priv->max_bitrate && dbt.bitrate > priv->max_bitrate) {
+			netdev_err(dev, "canfd data bitrate surpasses transceiver capabilities of %d bps\n",
+				   priv->max_bitrate);
+			return -EINVAL;
+		}
+
 		memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
 
 		if (priv->do_set_data_bittiming) {
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 61f1cf2..fbb7810 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -48,6 +48,8 @@ struct can_priv {
 	unsigned int data_bitrate_const_cnt;
 	struct can_clock clock;
 
+	unsigned int max_bitrate;
+
 	enum can_state state;
 
 	/* CAN controller features - see include/uapi/linux/can/netlink.h */
@@ -166,6 +168,12 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
 void can_free_echo_skb(struct net_device *dev, unsigned int idx);
 
+#ifdef CONFIG_OF
+void of_can_transceiver(struct net_device *dev);
+#else
+static inline void of_can_transceiver(struct net_device *dev) { }
+#endif
+
 struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
 struct sk_buff *alloc_canfd_skb(struct net_device *dev,
 				struct canfd_frame **cfd);
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-12-22 13:31 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-22 13:31 [PATCH v6 0/6] Add M_CAN Support for Dra76 platform Faiz Abbas
2017-12-22 13:31 ` [PATCH v6 2/6] can: m_can: Add call to of_can_transceiver Faiz Abbas
2017-12-22 13:31 ` [PATCH v6 3/6] can: m_can: Add PM Runtime Faiz Abbas
2018-01-02 16:07   ` Marc Kleine-Budde
     [not found]     ` <aea8638a-c847-b55e-ff2d-37999980ba7b-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2018-01-03 12:39       ` Faiz Abbas
     [not found]         ` <1308ee81-a1e9-ac5a-2d97-334fa825ef8d-l0cyMroinI0@public.gmane.org>
2018-01-03 14:25           ` Marc Kleine-Budde
2018-01-03 15:06             ` Faiz Abbas
2018-01-03 15:17               ` Marc Kleine-Budde
     [not found]                 ` <cb306ae5-87c5-f6ef-0c40-3b47e208d256-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2018-01-04 15:17                   ` Faiz Abbas
     [not found]                     ` <6bdaab16-cb16-e039-473c-52dd295bd4ba-l0cyMroinI0@public.gmane.org>
2018-01-04 15:18                       ` Marc Kleine-Budde
2018-01-05  1:23                     ` Yang, Wenyou
2017-12-22 13:31 ` [PATCH v6 4/6] can: m_can: Support higher speed CAN-FD bitrates Faiz Abbas
2018-01-02 13:35   ` Marc Kleine-Budde
2018-01-03 12:55     ` Faiz Abbas
     [not found] ` <1513949488-13026-1-git-send-email-faiz_abbas-l0cyMroinI0@public.gmane.org>
2017-12-22 13:31   ` Faiz Abbas [this message]
2018-01-02 13:00     ` [PATCH v6 1/6] can: dev: Add support for limiting configured bitrate Marc Kleine-Budde
2018-01-03 12:19       ` Faiz Abbas
2018-01-02 16:15     ` Marc Kleine-Budde
     [not found]       ` <8d973da8-df40-e37e-377f-50666db382fe-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2018-01-03 12:21         ` Faiz Abbas
2017-12-22 13:31   ` [PATCH v6 5/6] dt-bindings: can: m_can: Document new can transceiver binding Faiz Abbas
2017-12-22 13:31 ` [PATCH v6 6/6] dt-bindings: can: can-transceiver: Document new binding Faiz Abbas
2017-12-29  3:38 ` [PATCH v6 0/6] Add M_CAN Support for Dra76 platform Yang, Wenyou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1513949488-13026-2-git-send-email-faiz_abbas@ti.com \
    --to=faiz_abbas-l0cymroini0@public.gmane.org \
    --cc=Wenyou.Yang-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=fcooper-l0cyMroinI0@public.gmane.org \
    --cc=linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=nsekhar-l0cyMroinI0@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org \
    --cc=wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).