From: Ludovic Barre <ludovic.Barre@st.com>
To: Russell King <linux@armlinux.org.uk>,
Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Arnd Bergmann <arnd@arndb.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Gerald Baeza <gerald.baeza@st.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH v3 1/7] Documentation: arm: stm32: move to rst format
Date: Tue, 2 Jan 2018 16:01:45 +0100 [thread overview]
Message-ID: <1514905311-12925-2-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1514905311-12925-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
This patch rewrites stm32 documentation to rst
(ReStructuredText) format.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
Documentation/arm/stm32/overview.rst | 31 +++++++++++++++++++++++
Documentation/arm/stm32/overview.txt | 33 -------------------------
Documentation/arm/stm32/stm32f429-overview.rst | 26 ++++++++++++++++++++
Documentation/arm/stm32/stm32f429-overview.txt | 22 -----------------
Documentation/arm/stm32/stm32f746-overview.rst | 33 +++++++++++++++++++++++++
Documentation/arm/stm32/stm32f746-overview.txt | 34 --------------------------
Documentation/arm/stm32/stm32h743-overview.rst | 34 ++++++++++++++++++++++++++
Documentation/arm/stm32/stm32h743-overview.txt | 30 -----------------------
8 files changed, 124 insertions(+), 119 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.rst
delete mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/arm/stm32/stm32f746-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32f746-overview.txt
create mode 100644 Documentation/arm/stm32/stm32h743-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32h743-overview.txt
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
new file mode 100644
index 0000000..6be6059
--- /dev/null
+++ b/Documentation/arm/stm32/overview.rst
@@ -0,0 +1,31 @@
+========================
+STM32 ARM Linux Overview
+========================
+
+Introduction
+------------
+
+The STMicroelectronics family of Cortex-M based MCUs are supported by the
+'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
+and STM32F746 (Cortex-M7) are supported.
+
+Configuration
+-------------
+
+A generic configuration is provided for STM32 family, and can be used as the
+default by
+ make stm32_defconfig
+
+Layout
+------
+
+All the files for multiple machine families are located in the platform code
+contained in arch/arm/mach-stm32
+
+There is a generic board board-dt.c in the mach folder which support
+Flattened Device Tree, which means, it works with any compatible board with
+Device Trees.
+
+:Authors:
+
+Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
deleted file mode 100644
index a03b035..0000000
--- a/Documentation/arm/stm32/overview.txt
+++ /dev/null
@@ -1,33 +0,0 @@
- STM32 ARM Linux Overview
- ========================
-
-Introduction
-------------
-
- The STMicroelectronics family of Cortex-M based MCUs are supported by the
- 'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
- and STM32F746 (Cortex-M7) are supported.
-
-
-Configuration
--------------
-
- A generic configuration is provided for STM32 family, and can be used as the
- default by
- make stm32_defconfig
-
-Layout
-------
-
- All the files for multiple machine families are located in the platform code
- contained in arch/arm/mach-stm32
-
- There is a generic board board-dt.c in the mach folder which support
- Flattened Device Tree, which means, it works with any compatible board with
- Device Trees.
-
-
-Document Author
----------------
-
- Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst
new file mode 100644
index 0000000..18feda9
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f429-overview.rst
@@ -0,0 +1,26 @@
+STM32F429 Overview
+==================
+
+Introduction
+------------
+
+The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+It features:
+
+- ARM Cortex-M4 up to 180MHz with FPU
+- 2MB internal Flash Memory
+- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+- LCD controller & Camera interface
+- Cryptographic processor
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F429_).
+
+.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+:Authors:
+
+Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f429-overview.txt b/Documentation/arm/stm32/stm32f429-overview.txt
deleted file mode 100644
index 5206822..0000000
--- a/Documentation/arm/stm32/stm32f429-overview.txt
+++ /dev/null
@@ -1,22 +0,0 @@
- STM32F429 Overview
- ==================
-
- Introduction
- ------------
- The STM32F429 is a Cortex-M4 MCU aimed at various applications.
- It features:
- - ARM Cortex-M4 up to 180MHz with FPU
- - 2MB internal Flash Memory
- - External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
- - I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
- - LCD controller & Camera interface
- - Cryptographic processor
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
-
- Document Author
- ---------------
- Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst
new file mode 100644
index 0000000..b5f4b6c
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f746-overview.rst
@@ -0,0 +1,33 @@
+STM32F746 Overview
+==================
+
+Introduction
+------------
+
+The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F746_).
+
+.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.txt b/Documentation/arm/stm32/stm32f746-overview.txt
deleted file mode 100644
index cffd2b1c..0000000
--- a/Documentation/arm/stm32/stm32f746-overview.txt
+++ /dev/null
@@ -1,34 +0,0 @@
- STM32F746 Overview
- ==================
-
- Introduction
- ------------
- The STM32F746 is a Cortex-M7 MCU aimed at various applications.
- It features:
- - Cortex-M7 core running up to @216MHz
- - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
- - FMC controller to connect SDRAM, NOR and NAND memories
- - Dual mode QSPI
- - SD/MMC/SDIO support
- - Ethernet controller
- - USB OTFG FS & HS controllers
- - I2C, SPI, CAN busses support
- - Several 16 & 32 bits general purpose timers
- - Serial Audio interface
- - LCD controller
- - HDMI-CEC
- - SPDIFRX
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
-
- Document Author
- ---------------
- Alexandre Torgue <alexandre.torgue@st.com>
-
-
-
-
-
diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst
new file mode 100644
index 0000000..3458dc0
--- /dev/null
+++ b/Documentation/arm/stm32/stm32h743-overview.rst
@@ -0,0 +1,34 @@
+STM32H743 Overview
+==================
+
+Introduction
+------------
+
+The STM32H743 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @400MHz
+- 2MB internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H743_).
+
+.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.txt b/Documentation/arm/stm32/stm32h743-overview.txt
deleted file mode 100644
index 3031cba..0000000
--- a/Documentation/arm/stm32/stm32h743-overview.txt
+++ /dev/null
@@ -1,30 +0,0 @@
- STM32H743 Overview
- ==================
-
- Introduction
- ------------
- The STM32H743 is a Cortex-M7 MCU aimed at various applications.
- It features:
- - Cortex-M7 core running up to @400MHz
- - 2MB internal flash, 1MBytes internal RAM
- - FMC controller to connect SDRAM, NOR and NAND memories
- - Dual mode QSPI
- - SD/MMC/SDIO support
- - Ethernet controller
- - USB OTFG FS & HS controllers
- - I2C, SPI, CAN busses support
- - Several 16 & 32 bits general purpose timers
- - Serial Audio interface
- - LCD controller
- - HDMI-CEC
- - SPDIFRX
- - DFSDM
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
-
- Document Author
- ---------------
- Alexandre Torgue <alexandre.torgue@st.com>
--
2.7.4
next prev parent reply other threads:[~2018-01-02 15:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 15:01 [PATCH v3 0/7] ARM: stm32: add initial STM32MPU support Ludovic Barre
2018-01-02 15:01 ` Ludovic Barre [this message]
[not found] ` <1514905311-12925-1-git-send-email-ludovic.Barre-qxv4g6HH51o@public.gmane.org>
2018-01-02 15:01 ` [PATCH v3 2/7] ARM: stm32: prepare stm32 family to welcome armv7 architecture Ludovic Barre
2018-01-02 15:01 ` [PATCH v3 3/7] dt-bindings: stm32: add support of STM32MP157 Ludovic Barre
2018-01-02 15:01 ` [PATCH v3 5/7] ARM: configs: multi_v7: add stm32 support Ludovic Barre
2018-01-02 15:01 ` [PATCH v3 6/7] ARM: dts: stm32: add stm32mp157c initial support Ludovic Barre
2018-01-02 15:01 ` [PATCH v3 4/7] ARM: stm32: add initial support for STM32MP157 Ludovic Barre
2018-01-02 15:01 ` [PATCH v3 7/7] ARM: dts: stm32: add initial support of stm32mp157c eval board Ludovic Barre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1514905311-12925-2-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=gerald.baeza@st.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).