From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ivaylo Dimitrov Subject: [PATCH] ARM: dts: n900: Add aliases for lcd and tvout displays Date: Wed, 3 Jan 2018 00:17:14 +0200 Message-ID: <1514931434-13192-1-git-send-email-ivo.g.dimitrov.75@gmail.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: tony@atomide.com, bcousson@baylibre.com Cc: robh+dt@kernel.org, mark.rutland@arm.com, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Ivaylo Dimitrov List-Id: devicetree@vger.kernel.org When both lcd and tv are enabled, the order in which they will be probed is unknown, so it might happen (and it happens in reality) that tv is configured as display0 and lcd as display1, which results in nothing displayed on lcd, as display1 is disabled by default. Fix that by providing correct aliases for lcd and tv Signed-off-by: Ivaylo Dimitrov --- arch/arm/boot/dts/omap3-n900.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 669c51c..4b9c3a7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -35,6 +35,8 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + display0 = &lcd; + display1 = &tv; }; cpus { @@ -965,7 +967,7 @@ ti,esd-recovery-timeout-ms = <8000>; }; - acx565akm@2 { + lcd: acx565akm@2 { compatible = "sony,acx565akm"; spi-max-frequency = <6000000>; reg = <2>; -- 1.9.1