* [PATCH 1/7] ARM: dts: STi: fix bindings notation
2018-01-10 8:21 [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings patrice.chotard
@ 2018-01-10 8:21 ` patrice.chotard
2018-01-10 8:21 ` [PATCH 2/7] ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property patrice.chotard
` (6 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: patrice.chotard @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt, mark.rutland, linux, linux-arm-kernel, linux-kernel,
devicetree
Cc: patrice.chotard
From: Patrice Chotard <patrice.chotard@st.com>
Remove leading 0x and 0s from bindings notation
Add missing unit-address and remove some which are useless.
This allows to fix several warnings like :
Warning (unit_address_vs_reg): Node XXXX has a reg or ranges property, but no unit name
Warning (simple_bus_reg): Node XXXX simple-bus unit address format error, expected "123456"
Warning (unit_address_vs_reg): Node XXXX has a unit name, but no reg property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stih407-b2120.dts | 2 +-
arch/arm/boot/dts/stih407-clock.dtsi | 4 ++--
arch/arm/boot/dts/stih407-family.dtsi | 8 ++++----
arch/arm/boot/dts/stih407-pinctrl.dtsi | 10 +++++-----
arch/arm/boot/dts/stih410-b2120.dts | 2 +-
arch/arm/boot/dts/stih410-b2260.dts | 4 ++--
arch/arm/boot/dts/stih410-clock.dtsi | 4 ++--
arch/arm/boot/dts/stih410-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/stih410.dtsi | 2 +-
arch/arm/boot/dts/stih418-b2199.dts | 4 ++--
arch/arm/boot/dts/stih418-clock.dtsi | 4 ++--
arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
12 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index c8ad905..cf8bc8a 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index d0a24d9..b882dcf 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -83,7 +83,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -260,7 +260,7 @@
clock-frequency = <0>;
};
- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index cf37569..1608c70 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -92,7 +92,7 @@
clocks = <&arm_periph_clk>;
};
- l2: cache-controller {
+ l2: cache-controller@8762000 {
compatible = "arm,pl310-cache";
reg = <0x08762000 0x1000>;
arm,data-latency = <3 3 3>;
@@ -389,7 +389,7 @@
reset-names = "global", "port";
};
- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
compatible = "st,miphy28lp-phy";
st,syscfg = <&syscfg_core>;
#address-cells = <1>;
@@ -803,7 +803,7 @@
status = "okay";
};
- st231_gp0: st231-gp0@0 {
+ st231_gp0: st231-gp0 {
compatible = "st,st231-rproc";
memory-region = <&gp0_reserved>;
resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
@@ -816,7 +816,7 @@
mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
};
- st231_delta: st231-delta@0 {
+ st231_delta: st231-delta {
compatible = "st,st231-rproc";
memory-region = <&delta_reserved>;
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a290900..53c6888 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -45,7 +45,7 @@
};
soc {
- pin-controller-sbc {
+ pin-controller-sbc@961f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-sbc-pinctrl";
@@ -369,7 +369,7 @@
};
};
- pin-controller-front0 {
+ pin-controller-front0@920f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-front-pinctrl";
@@ -929,7 +929,7 @@
};
};
- pin-controller-front1 {
+ pin-controller-front1@921f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-front-pinctrl";
@@ -962,7 +962,7 @@
};
};
- pin-controller-rear {
+ pin-controller-rear@922f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-rear-pinctrl";
@@ -1157,7 +1157,7 @@
};
};
- pin-controller-flash {
+ pin-controller-flash@923f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-flash-pinctrl";
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 9830be5..37a42af 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index c663b70..faafc7b 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -19,7 +19,7 @@
linux,stdout-path = &uart1;
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
@@ -201,7 +201,7 @@
};
};
- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
phy_port1: port@9b2a000 {
st,osc-force-ext;
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index fde5df1..4df1b21 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -85,7 +85,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -272,7 +272,7 @@
clock-frequency = <0>;
};
- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
diff --git a/arch/arm/boot/dts/stih410-pinctrl.dtsi b/arch/arm/boot/dts/stih410-pinctrl.dtsi
index b3e9dfc..5ae1fd6 100644
--- a/arch/arm/boot/dts/stih410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih410-pinctrl.dtsi
@@ -10,7 +10,7 @@
/ {
soc {
- pin-controller-rear {
+ pin-controller-rear@922f080 {
usb0 {
pinctrl_usb0: usb2-0 {
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index cffa50d..07b02a3 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -234,7 +234,7 @@
<&clk_s_d2_quadfs 1>;
};
- sti-hqvdp@9c000000 {
+ sti-hqvdp@9c00000 {
compatible = "st,stih407-hqvdp";
reg = <0x9C00000 0x100000>;
clock-names = "hqvdp", "pix_main";
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 4e6d915..5418a0e 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0xc0000000>;
};
@@ -88,7 +88,7 @@
non-removable;
};
- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
phy_port0: port@9b22000 {
st,osc-rdy;
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 9a157c1..e68bf28 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -85,7 +85,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -265,7 +265,7 @@
clock-frequency = <0>;
};
- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 7f80c2c..68783e8 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -80,7 +80,7 @@
st,i2c-min-sda-pulse-width-us = <5>;
};
- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
phy_port0: port@9b22000 {
st,osc-rdy;
@@ -126,7 +126,7 @@
clock-names = "c8sectpfe";
/* tsin0 is TSA on NIMA */
- tsin0: port@0 {
+ tsin0: port {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/7] ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
2018-01-10 8:21 [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings patrice.chotard
2018-01-10 8:21 ` [PATCH 1/7] ARM: dts: STi: fix bindings notation patrice.chotard
@ 2018-01-10 8:21 ` patrice.chotard
2018-01-15 14:59 ` Arnd Bergmann
2018-01-10 8:21 ` [PATCH 3/7] ARM: dts: STi: Move clocks without reg outside soc patrice.chotard
` (5 subsequent siblings)
7 siblings, 1 reply; 16+ messages in thread
From: patrice.chotard @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt, mark.rutland, linux, linux-arm-kernel, linux-kernel,
devicetree
Cc: patrice.chotard
From: Patrice Chotard <patrice.chotard@st.com>
The GPIO polarity is missing in the hdmi,hpd-gpio property, this
fixes the following DT warnings:
arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stih407.dtsi | 3 ++-
arch/arm/boot/dts/stih410.dtsi | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index fa14983..11fdecd 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -8,6 +8,7 @@
*/
#include "stih407-clock.dtsi"
#include "stih407-family.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
soc {
sti-display-subsystem {
@@ -122,7 +123,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 07b02a3..e4b7e3d 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -9,6 +9,7 @@
#include "stih410-clock.dtsi"
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
bdisp0 = &bdisp0;
@@ -213,7 +214,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH 2/7] ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
2018-01-10 8:21 ` [PATCH 2/7] ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property patrice.chotard
@ 2018-01-15 14:59 ` Arnd Bergmann
2018-01-15 17:43 ` [PATCH 2/7] ARM: dts: STi: Add gpio polarity for "hdmi, hpd-gpio" property Patrice CHOTARD
0 siblings, 1 reply; 16+ messages in thread
From: Arnd Bergmann @ 2018-01-15 14:59 UTC (permalink / raw)
To: Patrice Chotard
Cc: Rob Herring, Mark Rutland, Russell King - ARM Linux, Linux ARM,
Linux Kernel Mailing List, DTML, arm-soc
On Wed, Jan 10, 2018 at 9:21 AM, <patrice.chotard@st.com> wrote:
> From: Patrice Chotard <patrice.chotard@st.com>
>
> The GPIO polarity is missing in the hdmi,hpd-gpio property, this
> fixes the following DT warnings:
>
> arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
> size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
>
> arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
> size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
>
> arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property
> size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
>
> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Olof has picked up a number of other dtc warning fixes into next/dt,
so I ended up
adding this to the same place rather than our fixes branch, but added
a Cc:stable
tag. We now have just one warning left in arm-soc, and I think Linus
Walleij will
send a patch for that soon.
Please send a pull request for the remaining commits from the STi
series, thanks!
Arnd
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH 2/7] ARM: dts: STi: Add gpio polarity for "hdmi, hpd-gpio" property
2018-01-15 14:59 ` Arnd Bergmann
@ 2018-01-15 17:43 ` Patrice CHOTARD
0 siblings, 0 replies; 16+ messages in thread
From: Patrice CHOTARD @ 2018-01-15 17:43 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Mark Rutland, DTML, arm-soc, Russell King - ARM Linux,
Linux Kernel Mailing List, Rob Herring, Linux ARM
Hi Arnd
On 01/15/2018 03:59 PM, Arnd Bergmann wrote:
> On Wed, Jan 10, 2018 at 9:21 AM, <patrice.chotard@st.com> wrote:
>> From: Patrice Chotard <patrice.chotard@st.com>
>>
>> The GPIO polarity is missing in the hdmi,hpd-gpio property, this
>> fixes the following DT warnings:
>>
>> arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
>> size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
>>
>> arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
>> size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
>>
>> arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property
>> size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
>
> Olof has picked up a number of other dtc warning fixes into next/dt,
> so I ended up
> adding this to the same place rather than our fixes branch, but added
> a Cc:stable
> tag. We now have just one warning left in arm-soc, and I think Linus
> Walleij will
> send a patch for that soon. >
> Please send a pull request for the remaining commits from the STi
> series, thanks!
Ok thanks
Patrice
>
> Arnd
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 3/7] ARM: dts: STi: Move clocks without reg outside soc
2018-01-10 8:21 [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings patrice.chotard
2018-01-10 8:21 ` [PATCH 1/7] ARM: dts: STi: fix bindings notation patrice.chotard
2018-01-10 8:21 ` [PATCH 2/7] ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property patrice.chotard
@ 2018-01-10 8:21 ` patrice.chotard
2018-01-10 8:21 ` [PATCH 5/7] ARM: dts: STi: Move usb2_picophyX nodes without reg out of soc patrice.chotard
` (4 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: patrice.chotard @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt, mark.rutland, linux, linux-arm-kernel, linux-kernel,
devicetree
Cc: patrice.chotard
From: Patrice Chotard <patrice.chotard@st.com>
Move clocks without reg property outside soc node,
this allows to fix the following warnings when compiling
dtb with W=1 option :
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /clocks/clk-sysin missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /clocks/clk-m-a9-periphs missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /clocks/clk-m-a9-ext2f-div2s missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /clocks/clockgen-c0 missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /clocks/clk-tmdsout-hdmi missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /clocks/clk-sysin missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /clocks/clk-m-a9-periphs missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /clocks/clk-m-a9-ext2f-div2s missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /clocks/clockgen-c0 missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /clocks/clk-tmdsout-hdmi missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /clocks/clk-sysin missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /clocks/clk-m-a9-periphs missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /clocks/clk-m-a9-ext2f-div2s missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /clocks/clockgen-c0 missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /clocks/clk-tmdsout-hdmi missing or empty reg/ranges property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stih407-clock.dtsi | 106 +++++++++++++++++-----------------
arch/arm/boot/dts/stih410-clock.dtsi | 103 ++++++++++++++++-----------------
arch/arm/boot/dts/stih418-clock.dtsi | 107 ++++++++++++++++++-----------------
3 files changed, 157 insertions(+), 159 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index b882dcf..6df63b2 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -7,33 +7,65 @@
*/
#include <dt-bindings/clock/stih407-clks.h>
/ {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
/*
- * Fixed 30MHz oscillator inputs to SoC
- */
- clk_sysin: clk-sysin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <30000000>;
- };
-
- /*
- * ARM Peripheral clock for timers
- */
- arm_periph_clk: clk-m-a9-periphs {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
-
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- /*
* A9 PLL.
*/
clockgen-a9@92b0000 {
@@ -64,32 +96,6 @@
<&clk_m_a9_ext2f_div2>;
};
- /*
- * ARM Peripheral clock for timers
- */
- clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
-
- clocks = <&clk_s_c0_flexgen 13>;
-
- clock-output-names = "clk-m-a9-ext2f-div2";
-
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- /*
- * Bootloader initialized system infrastructure clock for
- * serial devices.
- */
- clk_ext2f_a9: clockgen-c0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- clock-output-names = "clk-s-icn-reg-0";
- };
-
clockgen-a@90ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
@@ -254,12 +260,6 @@
"clk-s-d2-fs0-ch3";
};
- clk_tmdsout_hdmi: clk-tmdsout-hdmi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 4df1b21..ee30dba 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -7,6 +7,56 @@
*/
#include <dt-bindings/clock/stih410-clks.h>
/ {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_s_c0_flexgen 13>;
+ clock-output-names = "clk-m-a9-ext2f-div2";
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -15,27 +65,6 @@
compatible = "st,stih410-clk", "simple-bus";
/*
- * Fixed 30MHz oscillator inputs to SoC
- */
- clk_sysin: clk-sysin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <30000000>;
- clock-output-names = "CLK_SYSIN";
- };
-
- /*
- * ARM Peripheral clock for timers
- */
- arm_periph_clk: clk-m-a9-periphs {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- /*
* A9 PLL.
*/
clockgen-a9@92b0000 {
@@ -66,32 +95,6 @@
<&clk_m_a9_ext2f_div2>;
};
- /*
- * ARM Peripheral clock for timers
- */
- clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
-
- clocks = <&clk_s_c0_flexgen 13>;
-
- clock-output-names = "clk-m-a9-ext2f-div2";
-
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- /*
- * Bootloader initialized system infrastructure clock for
- * serial devices.
- */
- clk_ext2f_a9: clockgen-c0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- clock-output-names = "clk-s-icn-reg-0";
- };
-
clockgen-a@90ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
@@ -266,12 +269,6 @@
"clk-s-d2-fs0-ch3";
};
- clk_tmdsout_hdmi: clk-tmdsout-hdmi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index e68bf28..fe5f0fd 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -7,6 +7,60 @@
*/
#include <dt-bindings/clock/stih418-clks.h>
/ {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -15,27 +69,6 @@
compatible = "st,stih418-clk", "simple-bus";
/*
- * Fixed 30MHz oscillator inputs to SoC
- */
- clk_sysin: clk-sysin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <30000000>;
- clock-output-names = "CLK_SYSIN";
- };
-
- /*
- * ARM Peripheral clock for timers
- */
- arm_periph_clk: clk-m-a9-periphs {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- /*
* A9 PLL.
*/
clockgen-a9@92b0000 {
@@ -66,32 +99,6 @@
<&clk_m_a9_ext2f_div2>;
};
- /*
- * ARM Peripheral clock for timers
- */
- clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
-
- clocks = <&clk_s_c0_flexgen 13>;
-
- clock-output-names = "clk-m-a9-ext2f-div2";
-
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- /*
- * Bootloader initialized system infrastructure clock for
- * serial devices.
- */
- clk_ext2f_a9: clockgen-c0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- clock-output-names = "clk-s-icn-reg-0";
- };
-
clockgen-a@90ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
@@ -259,12 +266,6 @@
"clk-s-d2-fs0-ch3";
};
- clk_tmdsout_hdmi: clk-tmdsout-hdmi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 5/7] ARM: dts: STi: Move usb2_picophyX nodes without reg out of soc
2018-01-10 8:21 [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings patrice.chotard
` (2 preceding siblings ...)
2018-01-10 8:21 ` [PATCH 3/7] ARM: dts: STi: Move clocks without reg outside soc patrice.chotard
@ 2018-01-10 8:21 ` patrice.chotard
2018-01-10 8:21 ` [PATCH 5/7] ARM: dts: STi: Move usb2_picophyX nodes without reg property " patrice.chotard
` (3 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: patrice.chotard @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt, mark.rutland, linux, linux-arm-kernel, linux-kernel,
devicetree
Cc: patrice.chotard
From: Patrice Chotard <patrice.chotard@st.com>
Move usb2_picophyX nodes outside from soc node, this allows to fix
the following warning when compiling dtb with W=1 option :
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/phy2 missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/phy3 missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/phy2 missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/phy3 missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/phy2 missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/phy3 missing or empty reg/ranges property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stih410-b2120.dts | 16 +++++++--------
arch/arm/boot/dts/stih410-b2260.dts | 16 +++++++--------
arch/arm/boot/dts/stih410.dtsi | 40 ++++++++++++++++++-------------------
arch/arm/boot/dts/stih418.dtsi | 34 +++++++++++++++----------------
4 files changed, 53 insertions(+), 53 deletions(-)
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 37a42af..8a03ade 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -28,6 +28,14 @@
ethernet0 = ðernet0;
};
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
soc {
mmc0: sdhci@9060000 {
@@ -37,14 +45,6 @@
sd-uhs-ddr50;
};
- usb2_picophy1: phy2 {
- status = "okay";
- };
-
- usb2_picophy2: phy3 {
- status = "okay";
- };
-
ohci0: usb@9a03c00 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 69c2abc..a2d1e54 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -57,6 +57,14 @@
};
};
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
@@ -127,14 +135,6 @@
status = "okay";
};
- usb2_picophy1: phy2 {
- status = "okay";
- };
-
- usb2_picophy2: phy3 {
- status = "okay";
- };
-
ohci0: usb@9a03c00 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index e4b7e3d..a76fee9 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -15,29 +15,29 @@
bdisp0 = &bdisp0;
};
- soc {
- usb2_picophy1: phy2 {
- compatible = "st,stih407-usb2-phy";
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xf8 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
- reset-names = "global", "port";
-
- status = "disabled";
- };
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+
+ status = "disabled";
+ };
- usb2_picophy2: phy3 {
- compatible = "st,stih407-usb2-phy";
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xfc 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY1_RESET>;
- reset-names = "global", "port";
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
- status = "disabled";
- };
+ status = "disabled";
+ };
+ soc {
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index e6525ab..b3912a3 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -29,25 +29,25 @@
};
};
- soc {
- usb2_picophy1: phy2 {
- compatible = "st,stih407-usb2-phy";
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xf8 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
- reset-names = "global", "port";
- };
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
- usb2_picophy2: phy3 {
- compatible = "st,stih407-usb2-phy";
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xfc 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY1_RESET>;
- reset-names = "global", "port";
- };
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+ };
+ soc {
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 5/7] ARM: dts: STi: Move usb2_picophyX nodes without reg property out of soc
2018-01-10 8:21 [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings patrice.chotard
` (3 preceding siblings ...)
2018-01-10 8:21 ` [PATCH 5/7] ARM: dts: STi: Move usb2_picophyX nodes without reg out of soc patrice.chotard
@ 2018-01-10 8:21 ` patrice.chotard
2018-01-10 8:21 ` [PATCH 6/7] ARM: dts: STi: Move sound related nodes without reg " patrice.chotard
` (2 subsequent siblings)
7 siblings, 0 replies; 16+ messages in thread
From: patrice.chotard @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt, mark.rutland, linux, linux-arm-kernel, linux-kernel,
devicetree
Cc: patrice.chotard
From: Patrice Chotard <patrice.chotard@st.com>
Move usb2_picophyX nodes outside from soc node, this allows to fix
the following warning when compiling dtb with W=1 option :
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/phy2 missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/phy3 missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/phy2 missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/phy3 missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/phy2 missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/phy3 missing or empty reg/ranges property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stih410-b2120.dts | 16 +++++++--------
arch/arm/boot/dts/stih410-b2260.dts | 16 +++++++--------
arch/arm/boot/dts/stih410.dtsi | 40 ++++++++++++++++++-------------------
arch/arm/boot/dts/stih418.dtsi | 34 +++++++++++++++----------------
4 files changed, 53 insertions(+), 53 deletions(-)
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 37a42af..8a03ade 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -28,6 +28,14 @@
ethernet0 = ðernet0;
};
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
soc {
mmc0: sdhci@9060000 {
@@ -37,14 +45,6 @@
sd-uhs-ddr50;
};
- usb2_picophy1: phy2 {
- status = "okay";
- };
-
- usb2_picophy2: phy3 {
- status = "okay";
- };
-
ohci0: usb@9a03c00 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 69c2abc..a2d1e54 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -57,6 +57,14 @@
};
};
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
@@ -127,14 +135,6 @@
status = "okay";
};
- usb2_picophy1: phy2 {
- status = "okay";
- };
-
- usb2_picophy2: phy3 {
- status = "okay";
- };
-
ohci0: usb@9a03c00 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index e4b7e3d..a76fee9 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -15,29 +15,29 @@
bdisp0 = &bdisp0;
};
- soc {
- usb2_picophy1: phy2 {
- compatible = "st,stih407-usb2-phy";
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xf8 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
- reset-names = "global", "port";
-
- status = "disabled";
- };
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+
+ status = "disabled";
+ };
- usb2_picophy2: phy3 {
- compatible = "st,stih407-usb2-phy";
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xfc 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY1_RESET>;
- reset-names = "global", "port";
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
- status = "disabled";
- };
+ status = "disabled";
+ };
+ soc {
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index e6525ab..b3912a3 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -29,25 +29,25 @@
};
};
- soc {
- usb2_picophy1: phy2 {
- compatible = "st,stih407-usb2-phy";
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xf8 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
- reset-names = "global", "port";
- };
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
- usb2_picophy2: phy3 {
- compatible = "st,stih407-usb2-phy";
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xfc 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY1_RESET>;
- reset-names = "global", "port";
- };
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+ };
+ soc {
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 6/7] ARM: dts: STi: Move sound related nodes without reg out of soc
2018-01-10 8:21 [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings patrice.chotard
` (4 preceding siblings ...)
2018-01-10 8:21 ` [PATCH 5/7] ARM: dts: STi: Move usb2_picophyX nodes without reg property " patrice.chotard
@ 2018-01-10 8:21 ` patrice.chotard
[not found] ` <1515572469-19276-1-git-send-email-patrice.chotard-qxv4g6HH51o@public.gmane.org>
2018-01-10 8:21 ` [PATCH 7/7] ARM: dts: STi: Add fake reg property for sti-display-subsystem patrice.chotard
7 siblings, 0 replies; 16+ messages in thread
From: patrice.chotard @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt, mark.rutland, linux, linux-arm-kernel, linux-kernel,
devicetree
Cc: patrice.chotard
From: Patrice Chotard <patrice.chotard@st.com>
Move sti_sasg_codec and sound nodes outside from soc node, this allows
to fix the following warning when compiling dtb with W=1 option:
arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property
arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@1 has a unit name, but no reg property
arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@2 has a unit name, but no reg property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/sti-sasg-codec missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@1 has a unit name, but no reg property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@2 has a unit name, but no reg property
arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg):
Node /soc/sound missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/sti-sasg-codec missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /soc/sti-sasg-codec missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /soc/sound missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/sti-sasg-codec missing or empty reg/ranges property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stih407-family.dtsi | 14 ++---
arch/arm/boot/dts/stih410-b2260.dts | 38 ++++++-------
arch/arm/boot/dts/stihxxx-b2120.dtsi | 100 +++++++++++++++++-----------------
3 files changed, 76 insertions(+), 76 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 1608c70..e62dfb8 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -118,6 +118,13 @@
status = "okay";
};
+ sti_sasg_codec: sti-sasg-codec {
+ compatible = "st,stih407-sas-codec";
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ st,syscfg = <&syscfg_core>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -885,13 +892,6 @@
status = "disabled";
};
- sti_sasg_codec: sti-sasg-codec {
- compatible = "st,stih407-sas-codec";
- #sound-dai-cells = <1>;
- status = "disabled";
- st,syscfg = <&syscfg_core>;
- };
-
sti_uni_player0: sti-uni-player@8d80000 {
compatible = "st,stih407-uni-player-hdmi";
#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index a2d1e54..007a028 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -65,6 +65,25 @@
status = "okay";
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "STI-B2260";
+ status = "okay";
+
+ simple-audio-card,dai-link {
+ /* DAC */
+ format = "i2s";
+ mclk-fs = <128>;
+ cpu {
+ sound-dai = <&sti_uni_player0>;
+ };
+
+ codec {
+ sound-dai = <&sti_hdmi>;
+ };
+ };
+ };
+
soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
@@ -181,25 +200,6 @@
status = "okay";
};
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "STI-B2260";
- status = "okay";
-
- simple-audio-card,dai-link@0 {
- /* DAC */
- format = "i2s";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player0>;
- };
-
- codec {
- sound-dai = <&sti_hdmi>;
- };
- };
- };
-
miphy28lp_phy: miphy28lp {
phy_port1: port@9b2a000 {
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 1fd3a2b..9e3f1b5 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -23,6 +23,56 @@
};
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "STI-B2120";
+ status = "okay";
+
+ simple-audio-card,dai-link0 {
+ /* HDMI */
+ format = "i2s";
+ mclk-fs = <128>;
+ cpu {
+ sound-dai = <&sti_uni_player0>;
+ };
+
+ codec {
+ sound-dai = <&sti_hdmi>;
+ };
+ };
+ simple-audio-card,dai-link1 {
+ /* DAC */
+ format = "i2s";
+ mclk-fs = <256>;
+ frame-inversion = <1>;
+ cpu {
+ sound-dai = <&sti_uni_player2>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 1>;
+ };
+ };
+ simple-audio-card,dai-link2 {
+ /* SPDIF */
+ format = "left_j";
+ mclk-fs = <128>;
+ cpu {
+ sound-dai = <&sti_uni_player3>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 0>;
+ };
+ };
+ };
+
+ sti_sasg_codec: sti-sasg-codec {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif_out>;
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
@@ -146,55 +196,5 @@
sti_uni_player3: sti-uni-player@8d85000 {
status = "okay";
};
-
- sti_sasg_codec: sti-sasg-codec {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spdif_out>;
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "STI-B2120";
- status = "okay";
-
- simple-audio-card,dai-link@0 {
- /* HDMI */
- format = "i2s";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player0>;
- };
-
- codec {
- sound-dai = <&sti_hdmi>;
- };
- };
- simple-audio-card,dai-link@1 {
- /* DAC */
- format = "i2s";
- mclk-fs = <256>;
- frame-inversion = <1>;
- cpu {
- sound-dai = <&sti_uni_player2>;
- };
-
- codec {
- sound-dai = <&sti_sasg_codec 1>;
- };
- };
- simple-audio-card,dai-link@2 {
- /* SPDIF */
- format = "left_j";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player3>;
- };
-
- codec {
- sound-dai = <&sti_sasg_codec 0>;
- };
- };
- };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread[parent not found: <1515572469-19276-1-git-send-email-patrice.chotard-qxv4g6HH51o@public.gmane.org>]
* [PATCH 4/7] ARM: dts: STi: Move leds node outside soc node
[not found] ` <1515572469-19276-1-git-send-email-patrice.chotard-qxv4g6HH51o@public.gmane.org>
@ 2018-01-10 8:21 ` patrice.chotard-qxv4g6HH51o
2018-01-10 8:21 ` [PATCH 6/7] ARM: dts: STi: Move sound related nodes without reg property out of soc patrice.chotard-qxv4g6HH51o
2018-01-10 15:52 ` [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings Arnd Bergmann
2 siblings, 0 replies; 16+ messages in thread
From: patrice.chotard-qxv4g6HH51o @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: patrice.chotard-qxv4g6HH51o
From: Patrice Chotard <patrice.chotard-qxv4g6HH51o@public.gmane.org>
Leds are not part of soc, so nove them outside soc node.
This allows to fix the following warnings when compiling
dtb with W=1 option :
arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property
Signed-off-by: Patrice Chotard <patrice.chotard-qxv4g6HH51o@public.gmane.org>
---
arch/arm/boot/dts/stih410-b2260.dts | 49 ++++++++++++++++++------------------
arch/arm/boot/dts/stih418-b2199.dts | 26 +++++++++----------
arch/arm/boot/dts/stihxxx-b2120.dtsi | 26 +++++++++----------
3 files changed, 50 insertions(+), 51 deletions(-)
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index faafc7b..69c2abc 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -29,36 +29,35 @@
ethernet0 = ðernet0;
};
- soc {
-
- leds {
- compatible = "gpio-leds";
- user_green_1 {
- label = "User_green_1";
- gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
+ leds {
+ compatible = "gpio-leds";
+ user_green_1 {
+ label = "User_green_1";
+ gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
- user_green_2 {
- label = "User_green_2";
- gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_2 {
+ label = "User_green_2";
+ gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
- user_green_3 {
- label = "User_green_3";
- gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_3 {
+ label = "User_green_3";
+ gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
- user_green_4 {
- label = "User_green_4";
- gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_4 {
+ label = "User_green_4";
+ gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
};
+ };
+ soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
label = "LS-UART0";
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 5418a0e..1ce38ce 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -28,24 +28,24 @@
ethernet0 = ðernet0;
};
+ leds {
+ compatible = "gpio-leds";
+ red {
+ label = "Front Panel LED";
+ gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
};
- leds {
- compatible = "gpio-leds";
- red {
- label = "Front Panel LED";
- gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- green {
- gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
i2c@9842000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 68783e8..1fd3a2b 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -10,24 +10,24 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/c8sectpfe.h>
/ {
+ leds {
+ compatible = "gpio-leds";
+ red {
+ label = "Front Panel LED";
+ gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
};
- leds {
- compatible = "gpio-leds";
- red {
- label = "Front Panel LED";
- gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- green {
- gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
pwm0: pwm@9810000 {
status = "okay";
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 6/7] ARM: dts: STi: Move sound related nodes without reg property out of soc
[not found] ` <1515572469-19276-1-git-send-email-patrice.chotard-qxv4g6HH51o@public.gmane.org>
2018-01-10 8:21 ` [PATCH 4/7] ARM: dts: STi: Move leds node outside soc node patrice.chotard-qxv4g6HH51o
@ 2018-01-10 8:21 ` patrice.chotard-qxv4g6HH51o
2018-01-10 15:52 ` [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings Arnd Bergmann
2 siblings, 0 replies; 16+ messages in thread
From: patrice.chotard-qxv4g6HH51o @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: patrice.chotard-qxv4g6HH51o
From: Patrice Chotard <patrice.chotard-qxv4g6HH51o@public.gmane.org>
Move sti_sasg_codec and sound nodes outside from soc node, this allows
to fix the following warning when compiling dtb with W=1 option:
arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property
arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@1 has a unit name, but no reg property
arch/arm/boot/dts/stih407-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@2 has a unit name, but no reg property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/sti-sasg-codec missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@1 has a unit name, but no reg property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@2 has a unit name, but no reg property
arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg):
Node /soc/sound missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/sti-sasg-codec missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (unit_address_vs_reg):
Node /soc/sound/simple-audio-card,dai-link@0 has a unit name, but no reg property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /soc/sti-sasg-codec missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2260.dtb: Warning (simple_bus_reg):
Node /soc/sound missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/sti-sasg-codec missing or empty reg/ranges property
Signed-off-by: Patrice Chotard <patrice.chotard-qxv4g6HH51o@public.gmane.org>
---
arch/arm/boot/dts/stih407-family.dtsi | 14 ++---
arch/arm/boot/dts/stih410-b2260.dts | 38 ++++++-------
arch/arm/boot/dts/stihxxx-b2120.dtsi | 100 +++++++++++++++++-----------------
3 files changed, 76 insertions(+), 76 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 1608c70..e62dfb8 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -118,6 +118,13 @@
status = "okay";
};
+ sti_sasg_codec: sti-sasg-codec {
+ compatible = "st,stih407-sas-codec";
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ st,syscfg = <&syscfg_core>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -885,13 +892,6 @@
status = "disabled";
};
- sti_sasg_codec: sti-sasg-codec {
- compatible = "st,stih407-sas-codec";
- #sound-dai-cells = <1>;
- status = "disabled";
- st,syscfg = <&syscfg_core>;
- };
-
sti_uni_player0: sti-uni-player@8d80000 {
compatible = "st,stih407-uni-player-hdmi";
#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index a2d1e54..007a028 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -65,6 +65,25 @@
status = "okay";
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "STI-B2260";
+ status = "okay";
+
+ simple-audio-card,dai-link {
+ /* DAC */
+ format = "i2s";
+ mclk-fs = <128>;
+ cpu {
+ sound-dai = <&sti_uni_player0>;
+ };
+
+ codec {
+ sound-dai = <&sti_hdmi>;
+ };
+ };
+ };
+
soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
@@ -181,25 +200,6 @@
status = "okay";
};
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "STI-B2260";
- status = "okay";
-
- simple-audio-card,dai-link@0 {
- /* DAC */
- format = "i2s";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player0>;
- };
-
- codec {
- sound-dai = <&sti_hdmi>;
- };
- };
- };
-
miphy28lp_phy: miphy28lp {
phy_port1: port@9b2a000 {
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 1fd3a2b..9e3f1b5 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -23,6 +23,56 @@
};
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "STI-B2120";
+ status = "okay";
+
+ simple-audio-card,dai-link0 {
+ /* HDMI */
+ format = "i2s";
+ mclk-fs = <128>;
+ cpu {
+ sound-dai = <&sti_uni_player0>;
+ };
+
+ codec {
+ sound-dai = <&sti_hdmi>;
+ };
+ };
+ simple-audio-card,dai-link1 {
+ /* DAC */
+ format = "i2s";
+ mclk-fs = <256>;
+ frame-inversion = <1>;
+ cpu {
+ sound-dai = <&sti_uni_player2>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 1>;
+ };
+ };
+ simple-audio-card,dai-link2 {
+ /* SPDIF */
+ format = "left_j";
+ mclk-fs = <128>;
+ cpu {
+ sound-dai = <&sti_uni_player3>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 0>;
+ };
+ };
+ };
+
+ sti_sasg_codec: sti-sasg-codec {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif_out>;
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
@@ -146,55 +196,5 @@
sti_uni_player3: sti-uni-player@8d85000 {
status = "okay";
};
-
- sti_sasg_codec: sti-sasg-codec {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spdif_out>;
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "STI-B2120";
- status = "okay";
-
- simple-audio-card,dai-link@0 {
- /* HDMI */
- format = "i2s";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player0>;
- };
-
- codec {
- sound-dai = <&sti_hdmi>;
- };
- };
- simple-audio-card,dai-link@1 {
- /* DAC */
- format = "i2s";
- mclk-fs = <256>;
- frame-inversion = <1>;
- cpu {
- sound-dai = <&sti_uni_player2>;
- };
-
- codec {
- sound-dai = <&sti_sasg_codec 1>;
- };
- };
- simple-audio-card,dai-link@2 {
- /* SPDIF */
- format = "left_j";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player3>;
- };
-
- codec {
- sound-dai = <&sti_sasg_codec 0>;
- };
- };
- };
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings
[not found] ` <1515572469-19276-1-git-send-email-patrice.chotard-qxv4g6HH51o@public.gmane.org>
2018-01-10 8:21 ` [PATCH 4/7] ARM: dts: STi: Move leds node outside soc node patrice.chotard-qxv4g6HH51o
2018-01-10 8:21 ` [PATCH 6/7] ARM: dts: STi: Move sound related nodes without reg property out of soc patrice.chotard-qxv4g6HH51o
@ 2018-01-10 15:52 ` Arnd Bergmann
2018-01-10 17:17 ` Patrice CHOTARD
2 siblings, 1 reply; 16+ messages in thread
From: Arnd Bergmann @ 2018-01-10 15:52 UTC (permalink / raw)
To: Patrice Chotard
Cc: Rob Herring, Mark Rutland, Russell King - ARM Linux, Linux ARM,
Linux Kernel Mailing List, DTML
On Wed, Jan 10, 2018 at 9:21 AM, <patrice.chotard-qxv4g6HH51o@public.gmane.org> wrote:
> From: Patrice Chotard <patrice.chotard-qxv4g6HH51o@public.gmane.org>
>
> This series fixes all dtc warnings related to STi platforms dt files.
> It has been triggered by Rob Herring [1]
>
> [1] https://www.spinics.net/lists/devicetree/msg206209.html
>
> For most of implicated node, a simple move outside the soc node
> solves the warnings.
>
> Patrice Chotard (7):
> ARM: dts: STi: fix bindings notation
> ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
> ARM: dts: STi: Move clocks without reg outside soc
> ARM: dts: STi: Move leds node outside soc node
> ARM: dts: STi: Move usb2_picophyX nodes without reg out of soc
> ARM: dts: STi: Move sound related nodes without reg out of soc
> ARM: dts: STi: Add fake reg property for sti-display-subsystem
Thanks a lot for addressing these!
As far as I can tell, there is one patch in particular that addresses a warning
we get at the default warning level: "ARM: dts: STi: Add gpio polarity for
"hdmi,hpd-gpio" property". Should we merge that one for 4.15 to get closer
to a clean build again? I'm not sure whether we can address the other
dtc warnings, but we're getting fairly close now.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings
2018-01-10 15:52 ` [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings Arnd Bergmann
@ 2018-01-10 17:17 ` Patrice CHOTARD
[not found] ` <20f04806-2f33-3c16-d790-4a93c4c7187a-qxv4g6HH51o@public.gmane.org>
0 siblings, 1 reply; 16+ messages in thread
From: Patrice CHOTARD @ 2018-01-10 17:17 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Mark Rutland, DTML, Russell King - ARM Linux,
Linux Kernel Mailing List, Rob Herring, Linux ARM
Hi Arnd
On 01/10/2018 04:52 PM, Arnd Bergmann wrote:
> On Wed, Jan 10, 2018 at 9:21 AM, <patrice.chotard@st.com> wrote:
>> From: Patrice Chotard <patrice.chotard@st.com>
>>
>> This series fixes all dtc warnings related to STi platforms dt files.
>> It has been triggered by Rob Herring [1]
>>
>> [1] https://www.spinics.net/lists/devicetree/msg206209.html
>>
>> For most of implicated node, a simple move outside the soc node
>> solves the warnings.
>>
>> Patrice Chotard (7):
>> ARM: dts: STi: fix bindings notation
>> ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
>> ARM: dts: STi: Move clocks without reg outside soc
>> ARM: dts: STi: Move leds node outside soc node
>> ARM: dts: STi: Move usb2_picophyX nodes without reg out of soc
>> ARM: dts: STi: Move sound related nodes without reg out of soc
>> ARM: dts: STi: Add fake reg property for sti-display-subsystem
>
> Thanks a lot for addressing these!
>
> As far as I can tell, there is one patch in particular that addresses a warning
> we get at the default warning level: "ARM: dts: STi: Add gpio polarity for
> "hdmi,hpd-gpio" property". Should we merge that one for 4.15 to get closer
> to a clean build again? I'm not sure whether we can address the other
How do you want to proceed with this particular patch ?
Do you want me to send a pull-request with this patch ?
Patrice
> dtc warnings, but we're getting fairly close now.
>
> Arnd
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 7/7] ARM: dts: STi: Add fake reg property for sti-display-subsystem
2018-01-10 8:21 [PATCH 0/7] ARM: dts: STi: Fix DT dtc warnings patrice.chotard
` (6 preceding siblings ...)
[not found] ` <1515572469-19276-1-git-send-email-patrice.chotard-qxv4g6HH51o@public.gmane.org>
@ 2018-01-10 8:21 ` patrice.chotard
7 siblings, 0 replies; 16+ messages in thread
From: patrice.chotard @ 2018-01-10 8:21 UTC (permalink / raw)
To: robh+dt, mark.rutland, linux, linux-arm-kernel, linux-kernel,
devicetree
Cc: patrice.chotard
From: Patrice Chotard <patrice.chotard@st.com>
As sti-display-subsystem sub-nodes (sti-compositor, sti-tvout
sti-hdmi, sti-hda and sti-hqvdp) are SoC's IP, we add a fake reg
property instead of moving all these nodes outside soc node.
This allows to fix the following warning when compiling
dtb with W=1 option:
arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sti-display-subsystem/sti-hda@8d02000 has a unit name, but no reg property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stih407.dtsi | 4 ++--
arch/arm/boot/dts/stih410-b2120.dts | 2 +-
arch/arm/boot/dts/stih410.dtsi | 3 ++-
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 11fdecd..4f01777 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -11,11 +11,11 @@
#include <dt-bindings/gpio/gpio.h>
/ {
soc {
- sti-display-subsystem {
+ sti-display-subsystem@0 {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
#size-cells = <1>;
-
+ reg = <0 0>;
assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 8a03ade..115f5cd 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -61,7 +61,7 @@
status = "okay";
};
- sti-display-subsystem {
+ sti-display-subsystem@0 {
sti-hda@8d02000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index a76fee9..02a141a 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -102,11 +102,12 @@
status = "disabled";
};
- sti-display-subsystem {
+ sti-display-subsystem@0 {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0 0>;
assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread