Re: [PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver

[houlong wei <houlong.wei-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]

Hi Jassi,

We prefer to use method (1) to move dma_map_single() outside of
spin_lock. Do you have any comment about this?

Thanks,
Houlong

On Mon, 2018-01-08 at 16:38 +0800, houlong wei wrote:
> Hi Jassi,
> 
> Sorry for reply so late.
> According to previous discussion, there are two methods to move
> dma_map_single() outside of spin_lock.
> (1) put in mtk-cmdq-helper.c, as described by HS on 2017-02-09.
>   > I think a trade-off solution is to put in mtk-cmdq-helper.c.
>   > Although it is a mailbox client, it is not a CMDQ client.
>   > We can include mailbox_controller.h in mtk-cmdq-helper.c (instead of
> mtk-cmdq.h), and then map dma at cmdq_pkt_flush_async before
> mbox_send_message.
> 
>   > pkt->pa_base = dma_map_single(client->chan->mbox->dev, pkt->va_base,
>   >                              pkt->cmd_buf_size, DMA_TO_DEVICE);
> (2) schedule a tasklet in send_data().
> 
> After internal discussion with HS and other experts, now we prefer
> method (1).
> How do you think about it?
> 
> Thanks
> Houlong
> 
> 
> > -----Original Message-----
> > From: Horng-Shyang Liao [mailto:hs.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org]
> > Sent: Thursday, February 23, 2017 8:48 PM
> > To: Jassi Brar <jassisinghbrar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>; Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>; Daniel Kurtz <djkurtz-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>; Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>; Devicetree List <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>; Linux Kernel Mailing List <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>; linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org; linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org; srv_heupstream <srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>; Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>; Nicolas Boichat <drinkcat-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>; CK Hu (胡俊光) <ck.hu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Cawa Cheng (鄭曄禧) <cawa.cheng-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Bibby Hsieh (謝濟遠) <Bibby.Hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; YT Shen (沈岳霆) <yt.shen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Daoyuan Huang (黃道原) <Daoyuan.Huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Damon Chu (朱峻賢) <damon.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Josh-Y
 C Liu (劉育誠) <Josh-YC.Liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Glory Hung (洪智瑋) <glory.hung-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Jiaguang Zhang (张加广) <Jiaguang.Zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Dennis-YC Hsieh (謝宇哲) <Dennis-YC.Hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Monica Wang (王孟婷) <monica.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Houlong Wei (魏厚龙) <houlong.wei-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>; Hs Liao (廖宏祥) <hs.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > Subject: Re: [PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver
> >
> > On Thu, 2017-02-23 at 09:40 +0530, Jassi Brar wrote:
> > > On Wed, Feb 22, 2017 at 8:42 AM, Horng-Shyang Liao <hs.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> > > > On Thu, 2017-02-16 at 21:02 +0530, Jassi Brar wrote:
> > > >> On Mon, Feb 6, 2017 at 11:07 AM, Horng-Shyang Liao <hs.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> > > >> > Hi Jassi,
> > > >> >
> > > >> > On Wed, 2017-02-01 at 10:52 +0530, Jassi Brar wrote:
> > > >> >> On Thu, Jan 26, 2017 at 2:07 PM, Horng-Shyang Liao <hs.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> > > >> >> > Hi Jassi,
> > > >> >> >
> > > >> >> > On Thu, 2017-01-26 at 10:08 +0530, Jassi Brar wrote:
> > > >> >> >> On Wed, Jan 4, 2017 at 8:36 AM, HS Liao <hs.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> > > >> >> >>
> > > >> >> >> > diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c
> > > >> >> >> > b/drivers/mailbox/mtk-cmdq-mailbox.c
> > > >> >> >> > new file mode 100644
> > > >> >> >> > index 0000000..747bcd3
> > > >> >> >> > --- /dev/null
> > > >> >> >> > +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> > > >> >> >>
> > > >> >> >> ...
> > > >> >> >>
> > > >> >> >> > +static void cmdq_task_exec(struct cmdq_pkt *pkt, struct
> > > >> >> >> > +cmdq_thread *thread) {
> > > >> >> >> > +       struct cmdq *cmdq;
> > > >> >> >> > +       struct cmdq_task *task;
> > > >> >> >> > +       unsigned long curr_pa, end_pa;
> > > >> >> >> > +
> > > >> >> >> > +       cmdq = dev_get_drvdata(thread->chan->mbox->dev);
> > > >> >> >> > +
> > > >> >> >> > +       /* Client should not flush new tasks if suspended. */
> > > >> >> >> > +       WARN_ON(cmdq->suspended);
> > > >> >> >> > +
> > > >> >> >> > +       task = kzalloc(sizeof(*task), GFP_ATOMIC);
> > > >> >> >> > +       task->cmdq = cmdq;
> > > >> >> >> > +       INIT_LIST_HEAD(&task->list_entry);
> > > >> >> >> > +       task->pa_base = dma_map_single(cmdq->mbox.dev, pkt->va_base,
> > > >> >> >> > +                                      pkt->cmd_buf_size,
> > > >> >> >> > + DMA_TO_DEVICE);
> > > >> >> >> >
> > > >> >> >> You seem to parse the requests and responses, that should
> > > >> >> >> ideally be done in client driver.
> > > >> >> >> Also, we are here in atomic context, can you move it in
> > > >> >> >> client driver (before the spin_lock)?
> > > >> >> >> Maybe by adding a new 'pa_base' member as well in 'cmdq_pkt'.
> > > >> >> >
> > > >> >> > will do
> > > >> >
> > > >> > I agree with moving dma_map_single out from spin_lock.
> > > >> >
> > > >> > However, mailbox clients cannot map virtual memory to mailbox
> > > >> > controller's device for DMA.
> > > >> >
> > > >> If DMA is a resource used by MBox to transfer data, then yes the
> > > >> mapping needs to be done in the Mbox controller driver. To map
> > > >> memory outside of spinlock, you could schedule a tasklet in send_data() ?
> > > >
> > > > Hi Jassi,
> > > >
> > > > For CMDQ, the order of CMDQ tasks should be guaranteed.
> > > > However, it seems tasklet cannot ensure this requirement.
> > > >
> > > > Quote from Linux Device Drivers 3rd edition ch7.
> > > > "void tasklet_schedule(struct tasklet_struct *t);
> > > >   Schedule the tasklet for execution. If a tasklet is scheduled
> > > > again before it has a chance to run, it runs only once...."
> > > >
> > > Not sure what bothers you.
> > > If you only add requests to a list, protected by some spinlock, during
> > > send_datam you could always iterate over (submit) requests in the
> > > order you queued them.
> >
> > Hi Jassi,
> >
> > OK. I will do it.
> >
> > Thanks,
> > HS
> >
> >
> >
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html