From: Stefan Mavrodiev <stefan@olimex.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Cc: linux-sunxi@googlegroups.com, Stefan Mavrodiev <stefan@olimex.com>
Subject: [PATCH v2 2/2] ARM: dts: sunxi: Add Olimex A20-SOM204-EVB-eMMC board
Date: Mon, 29 Jan 2018 15:56:40 +0200 [thread overview]
Message-ID: <1517234202-1892-2-git-send-email-stefan@olimex.com> (raw)
In-Reply-To: <1517234202-1892-1-git-send-email-stefan@olimex.com>
A20-SOM204 board has option with onboard 16GB eMMC.
The chip is wired to MMC2 slot.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
Changes for v2:
- Replaced license header with SPDX-License-Identifier
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts | 36 ++++++++++++++++++++++
2 files changed, 37 insertions(+)
create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d88f04d..c890042 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -919,6 +919,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-mk808c.dtb \
sun7i-a20-olimex-som-evb.dtb \
sun7i-a20-olimex-som204-evb.dtb \
+ sun7i-a20-olimex-som204-evb-emmc.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
new file mode 100644
index 0000000..c56620a
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ * Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som204-evb.dts"
+
+/ {
+ model = "Olimex A20-SOM204-EVB-eMMC";
+ compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
+
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ emmc: emmc@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
--
2.7.4
next prev parent reply other threads:[~2018-01-29 13:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-29 13:56 [PATCH v2 1/2] ARM: dts: sunxi: Add Olimex A20-SOM204-EVB board Stefan Mavrodiev
2018-01-29 13:56 ` Stefan Mavrodiev [this message]
[not found] ` <1517234202-1892-2-git-send-email-stefan-kyXcfZUBQGPQT0dZR+AlfA@public.gmane.org>
2018-01-31 15:33 ` [PATCH v2 2/2] ARM: dts: sunxi: Add Olimex A20-SOM204-EVB-eMMC board Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1517234202-1892-2-git-send-email-stefan@olimex.com \
--to=stefan@olimex.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).