* [PATCH v6 1/3] dt-bindings: mailbox: Introduce Hi3660 controller binding
2018-02-28 4:54 [PATCH v6 0/3] Add support for Hi3660 mailbox driver Leo Yan
@ 2018-02-28 4:54 ` Leo Yan
2018-02-28 4:54 ` [PATCH v6 2/3] mailbox: Add support for Hi3660 mailbox Leo Yan
2018-02-28 4:54 ` [PATCH v6 3/3] dts: arm64: Add mailbox binding for hi3660 Leo Yan
2 siblings, 0 replies; 4+ messages in thread
From: Leo Yan @ 2018-02-28 4:54 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Wei Xu, Jassi Brar, devicetree,
linux-kernel, linux-arm-kernel, Kaihua Zhong, Guodong Xu,
Haojian Zhuang
Cc: Leo Yan
Introduce a binding for the Hi3660 mailbox controller, the mailbox is
used within application processor (AP), communication processor (CP),
HIFI and MCU, etc.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
.../bindings/mailbox/hisilicon,hi3660-mailbox.txt | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt
diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt
new file mode 100644
index 0000000..3e5b453
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt
@@ -0,0 +1,51 @@
+Hisilicon Hi3660 Mailbox Controller
+
+Hisilicon Hi3660 mailbox controller supports up to 32 channels. Messages
+are passed between processors, including application & communication
+processors, MCU, HIFI, etc. Each channel is unidirectional and accessed
+by using MMIO registers; it supports maximum to 8 words message.
+
+Controller
+----------
+
+Required properties:
+- compatible: : Shall be "hisilicon,hi3660-mbox"
+- reg: : Offset and length of the device's register set
+- #mbox-cells: : Must be 3
+ <&phandle channel dst_irq ack_irq>
+ phandle : Label name of controller
+ channel : Channel number
+ dst_irq : Remote interrupt vector
+ ack_irq : Local interrupt vector
+
+- interrupts: : Contains the two IRQ lines for mailbox.
+
+Example:
+
+mailbox: mailbox@e896b000 {
+ compatible = "hisilicon,hi3660-mbox";
+ reg = <0x0 0xe896b000 0x0 0x1000>;
+ interrupts = <0x0 0xc0 0x4>,
+ <0x0 0xc1 0x4>;
+ #mbox-cells = <3>;
+};
+
+Client
+------
+
+Required properties:
+- compatible : See the client docs
+- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt)
+ Cells must match 'mbox-cells' (See Controller docs above)
+
+Optional properties
+- mbox-names : Name given to channels seen in the 'mboxes' property.
+
+Example:
+
+stub_clock: stub_clock@e896b500 {
+ compatible = "hisilicon,hi3660-stub-clk";
+ reg = <0x0 0xe896b500 0x0 0x0100>;
+ #clock-cells = <1>;
+ mboxes = <&mailbox 13 3 0>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v6 2/3] mailbox: Add support for Hi3660 mailbox
2018-02-28 4:54 [PATCH v6 0/3] Add support for Hi3660 mailbox driver Leo Yan
2018-02-28 4:54 ` [PATCH v6 1/3] dt-bindings: mailbox: Introduce Hi3660 controller binding Leo Yan
@ 2018-02-28 4:54 ` Leo Yan
2018-02-28 4:54 ` [PATCH v6 3/3] dts: arm64: Add mailbox binding for hi3660 Leo Yan
2 siblings, 0 replies; 4+ messages in thread
From: Leo Yan @ 2018-02-28 4:54 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Wei Xu, Jassi Brar, devicetree,
linux-kernel, linux-arm-kernel, Kaihua Zhong, Guodong Xu,
Haojian Zhuang
Cc: Leo Yan, Ruyi Wang
From: Kaihua Zhong <zhongkaihua@huawei.com>
Hi3660 mailbox controller is used to send message within multiple
processors, MCU, HIFI, etc. It supports 32 mailbox channels and every
channel can only be used for single transferring direction. Once the
channel is enabled, it needs to specify the destination interrupt and
acknowledge interrupt, these two interrupt vectors are used to create
the connection between the mailbox and interrupt controllers.
The data transferring supports two modes, one is named as "automatic
acknowledge" mode so after send message the kernel doesn't need to wait
for acknowledge from remote and directly return; there have another mode
is to rely on handling interrupt for acknowledge.
This commit is for initial version driver, which only supports
"automatic acknowledge" mode to support CPU clock, which is the only
one consumer to use mailbox and has been verified. Later may enhance
this driver for interrupt mode (e.g. for supporting HIFI).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ruyi Wang <wangruyi@huawei.com>
Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com>
---
drivers/mailbox/Kconfig | 8 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/hi3660-mailbox.c | 312 +++++++++++++++++++++++++++++++++++++++
3 files changed, 322 insertions(+)
create mode 100644 drivers/mailbox/hi3660-mailbox.c
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index ba2f152..de8390d4 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -108,6 +108,14 @@ config TI_MESSAGE_MANAGER
multiple processors within the SoC. Select this driver if your
platform has support for the hardware block.
+config HI3660_MBOX
+ tristate "Hi3660 Mailbox"
+ depends on ARCH_HISI && OF
+ help
+ An implementation of the hi3660 mailbox. It is used to send message
+ between application processors and other processors/MCU/DSP. Select
+ Y here if you want to use Hi3660 mailbox controller.
+
config HI6220_MBOX
tristate "Hi6220 Mailbox"
depends on ARCH_HISI
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 4896f8d..cc23c3a 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -27,6 +27,8 @@ obj-$(CONFIG_TI_MESSAGE_MANAGER) += ti-msgmgr.o
obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o
+obj-$(CONFIG_HI3660_MBOX) += hi3660-mailbox.o
+
obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o
obj-$(CONFIG_BCM_PDC_MBOX) += bcm-pdc-mailbox.o
diff --git a/drivers/mailbox/hi3660-mailbox.c b/drivers/mailbox/hi3660-mailbox.c
new file mode 100644
index 0000000..3eea6b6
--- /dev/null
+++ b/drivers/mailbox/hi3660-mailbox.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2018 Hisilicon Limited.
+// Copyright (c) 2017-2018 Linaro Limited.
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "mailbox.h"
+
+#define MBOX_CHAN_MAX 32
+
+#define MBOX_RX 0x0
+#define MBOX_TX 0x1
+
+#define MBOX_BASE(mbox, ch) ((mbox)->base + ((ch) * 0x40))
+#define MBOX_SRC_REG 0x00
+#define MBOX_DST_REG 0x04
+#define MBOX_DCLR_REG 0x08
+#define MBOX_DSTAT_REG 0x0c
+#define MBOX_MODE_REG 0x10
+#define MBOX_IMASK_REG 0x14
+#define MBOX_ICLR_REG 0x18
+#define MBOX_SEND_REG 0x1c
+#define MBOX_DATA_REG 0x20
+
+#define MBOX_IPC_LOCK_REG 0xa00
+#define MBOX_IPC_UNLOCK 0x1acce551
+
+#define MBOX_AUTOMATIC_ACK 1
+
+#define MBOX_STATE_IDLE BIT(4)
+#define MBOX_STATE_ACK BIT(7)
+
+#define MBOX_MSG_LEN 8
+
+/**
+ * Hi3660 mailbox channel information
+ *
+ * A channel can be used for TX or RX, it can trigger remote
+ * processor interrupt to notify remote processor and can receive
+ * interrupt if has incoming message.
+ *
+ * @dst_irq: Interrupt vector for remote processor
+ * @ack_irq: Interrupt vector for local processor
+ */
+struct hi3660_chan_info {
+ unsigned int dst_irq;
+ unsigned int ack_irq;
+};
+
+/**
+ * Hi3660 mailbox controller data
+ *
+ * Mailbox controller includes 32 channels and can allocate
+ * channel for message transferring.
+ *
+ * @dev: Device to which it is attached
+ * @base: Base address of the register mapping region
+ * @chan: Representation of channels in mailbox controller
+ * @mchan: Representation of channel info
+ * @controller: Representation of a communication channel controller
+ */
+struct hi3660_mbox {
+ struct device *dev;
+ void __iomem *base;
+ struct mbox_chan chan[MBOX_CHAN_MAX];
+ struct hi3660_chan_info mchan[MBOX_CHAN_MAX];
+ struct mbox_controller controller;
+};
+
+static struct hi3660_mbox *to_hi3660_mbox(struct mbox_controller *mbox)
+{
+ return container_of(mbox, struct hi3660_mbox, controller);
+}
+
+static int hi3660_mbox_check_state(struct mbox_chan *chan)
+{
+ unsigned long ch = (unsigned long)chan->con_priv;
+ struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
+ struct hi3660_chan_info *mchan = &mbox->mchan[ch];
+ void __iomem *base = MBOX_BASE(mbox, ch);
+ unsigned long val;
+ unsigned int ret;
+
+ /* Mailbox is idle so directly bail out */
+ if (readl(base + MBOX_MODE_REG) & MBOX_STATE_IDLE)
+ return 0;
+
+ /* Wait for acknowledge from remote */
+ ret = readx_poll_timeout_atomic(readl, base + MBOX_MODE_REG,
+ val, (val & MBOX_STATE_ACK), 1000, 300000);
+ if (ret) {
+ dev_err(mbox->dev, "%s: timeout for receiving ack\n", __func__);
+ return ret;
+ }
+
+ /* Ensure channel is released */
+ writel(0xffffffff, base + MBOX_IMASK_REG);
+ writel(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
+ return 0;
+}
+
+static int hi3660_mbox_unlock(struct mbox_chan *chan)
+{
+ struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
+ unsigned int val, retry = 3;
+
+ do {
+ writel(MBOX_IPC_UNLOCK, mbox->base + MBOX_IPC_LOCK_REG);
+
+ val = readl(mbox->base + MBOX_IPC_LOCK_REG);
+ if (!val)
+ break;
+
+ udelay(10);
+ } while (retry--);
+
+ if (val)
+ dev_err(mbox->dev, "%s: failed to unlock mailbox\n", __func__);
+
+ return (!val) ? 0 : -ETIMEDOUT;
+}
+
+static int hi3660_mbox_acquire_channel(struct mbox_chan *chan)
+{
+ unsigned long ch = (unsigned long)chan->con_priv;
+ struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
+ struct hi3660_chan_info *mchan = &mbox->mchan[ch];
+ void __iomem *base = MBOX_BASE(mbox, ch);
+ unsigned int val, retry;
+
+ for (retry = 10; retry; retry--) {
+ /* Check if channel is in idle state */
+ if (readl(base + MBOX_MODE_REG) & MBOX_STATE_IDLE) {
+ writel(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
+
+ /* Check ack bit has been set successfully */
+ val = readl(base + MBOX_SRC_REG);
+ if (val & BIT(mchan->ack_irq))
+ break;
+ }
+ }
+
+ if (!retry)
+ dev_err(mbox->dev, "%s: failed to acquire channel\n", __func__);
+
+ return retry ? 0 : -ETIMEDOUT;
+}
+
+static int hi3660_mbox_startup(struct mbox_chan *chan)
+{
+ int ret;
+
+ ret = hi3660_mbox_check_state(chan);
+ if (ret)
+ return ret;
+
+ ret = hi3660_mbox_unlock(chan);
+ if (ret)
+ return ret;
+
+ ret = hi3660_mbox_acquire_channel(chan);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int hi3660_mbox_send_data(struct mbox_chan *chan, void *msg)
+{
+ unsigned long ch = (unsigned long)chan->con_priv;
+ struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
+ struct hi3660_chan_info *mchan = &mbox->mchan[ch];
+ void __iomem *base = MBOX_BASE(mbox, ch);
+ u32 *buf = msg;
+ unsigned int i;
+
+ /* Ensure channel is released */
+ writel_relaxed(0xffffffff, base + MBOX_IMASK_REG);
+ writel_relaxed(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
+
+ /* Clear mask for destination interrupt */
+ writel_relaxed(~BIT(mchan->dst_irq), base + MBOX_IMASK_REG);
+
+ /* Config destination for interrupt vector */
+ writel_relaxed(BIT(mchan->dst_irq), base + MBOX_DST_REG);
+
+ /* Automatic acknowledge mode */
+ writel_relaxed(MBOX_AUTOMATIC_ACK, base + MBOX_MODE_REG);
+
+ /* Fill message data */
+ for (i = 0; i < MBOX_MSG_LEN; i++)
+ writel_relaxed(buf[i], base + MBOX_DATA_REG + i * 4);
+
+ /* Trigger data transferring */
+ writel(BIT(mchan->ack_irq), base + MBOX_SEND_REG);
+ return 0;
+}
+
+static struct mbox_chan_ops hi3660_mbox_ops = {
+ .startup = hi3660_mbox_startup,
+ .send_data = hi3660_mbox_send_data,
+};
+
+static struct mbox_chan *hi3660_mbox_xlate(struct mbox_controller *controller,
+ const struct of_phandle_args *spec)
+{
+ struct hi3660_mbox *mbox = to_hi3660_mbox(controller);
+ struct hi3660_chan_info *mchan;
+ unsigned int ch = spec->args[0];
+
+ if (ch >= MBOX_CHAN_MAX) {
+ dev_err(mbox->dev, "Invalid channel idx %d\n", ch);
+ return ERR_PTR(-EINVAL);
+ }
+
+ mchan = &mbox->mchan[ch];
+ mchan->dst_irq = spec->args[1];
+ mchan->ack_irq = spec->args[2];
+
+ return &mbox->chan[ch];
+}
+
+static const struct of_device_id hi3660_mbox_of_match[] = {
+ { .compatible = "hisilicon,hi3660-mbox", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, hi3660_mbox_of_match);
+
+static int hi3660_mbox_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct hi3660_mbox *mbox;
+ struct mbox_chan *chan;
+ struct resource *res;
+ unsigned long ch;
+ int err;
+
+ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mbox->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mbox->base))
+ return PTR_ERR(mbox->base);
+
+ mbox->dev = dev;
+ mbox->controller.dev = dev;
+ mbox->controller.chans = mbox->chan;
+ mbox->controller.num_chans = MBOX_CHAN_MAX;
+ mbox->controller.ops = &hi3660_mbox_ops;
+ mbox->controller.of_xlate = hi3660_mbox_xlate;
+
+ /* Initialize mailbox channel data */
+ chan = mbox->chan;
+ for (ch = 0; ch < MBOX_CHAN_MAX; ch++)
+ chan[ch].con_priv = (void *)ch;
+
+ err = mbox_controller_register(&mbox->controller);
+ if (err) {
+ dev_err(dev, "Failed to register mailbox %d\n", err);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, mbox);
+ dev_info(dev, "Mailbox enabled\n");
+ return 0;
+}
+
+static int hi3660_mbox_remove(struct platform_device *pdev)
+{
+ struct hi3660_mbox *mbox = platform_get_drvdata(pdev);
+
+ mbox_controller_unregister(&mbox->controller);
+ return 0;
+}
+
+static struct platform_driver hi3660_mbox_driver = {
+ .probe = hi3660_mbox_probe,
+ .remove = hi3660_mbox_remove,
+ .driver = {
+ .name = "hi3660-mbox",
+ .of_match_table = hi3660_mbox_of_match,
+ },
+};
+
+static int __init hi3660_mbox_init(void)
+{
+ return platform_driver_register(&hi3660_mbox_driver);
+}
+core_initcall(hi3660_mbox_init);
+
+static void __exit hi3660_mbox_exit(void)
+{
+ platform_driver_unregister(&hi3660_mbox_driver);
+}
+module_exit(hi3660_mbox_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Hisilicon Hi3660 Mailbox Controller");
+MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread