From: Shawn Guo <shawn.guo@linaro.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Jianguo Sun <sunjianguo1@huawei.com>,
Jiancheng Xue <xuejiancheng@hisilicon.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH v3 0/2] Add HiSilicon INNO USB2 PHY driver support
Date: Thu, 1 Mar 2018 15:22:18 +0800 [thread overview]
Message-ID: <1519888940-23235-1-git-send-email-shawn.guo@linaro.org> (raw)
It adds device tree bindings and driver support for HiSilicon INNO USB2
PHY device, which can be found on HiSilicon STB SoC Hi3798cv200.
Changes for v3:
- Make combphy device be child of peripheral controller and use 'reg'
property for mapping combphy configuration register.
Changes for v2:
- Move DT bindings into a separate patch.
- Rename hisi_inno_phy_start() to hisi_inno_phy_init() for aligning
name with .init hook.
Pengcheng Li (2):
dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY
phy: add inno-usb2-phy driver for hi3798cv200 SoC
.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 52 +++++
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 218 +++++++++++++++++++++
4 files changed, 281 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c
--
1.9.1
next reply other threads:[~2018-03-01 7:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-01 7:22 Shawn Guo [this message]
2018-03-01 7:22 ` [PATCH v3 1/2] dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY Shawn Guo
2018-03-02 6:25 ` Kishon Vijay Abraham I
2018-03-02 7:37 ` Shawn Guo
2018-03-02 8:05 ` Kishon Vijay Abraham I
2018-03-02 8:45 ` Shawn Guo
2018-03-01 7:22 ` [PATCH v3 2/2] phy: add inno-usb2-phy driver for hi3798cv200 SoC Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519888940-23235-1-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sunjianguo1@huawei.com \
--cc=xuejiancheng@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).