From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jiaxun Yang Subject: Re: [RFC 3/4] MIPS: Ingenic: Initial X1000 SoC support Date: Wed, 07 Mar 2018 22:19:51 +0800 Message-ID: <1520432391.3731.8.camel@flygoat.com> References: <20170927151527.25570-1-prasannatsmkumar@gmail.com> <20170927151527.25570-4-prasannatsmkumar@gmail.com> <20180306000832.GL4197@saruman> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: PrasannaKumar Muralidharan , James Hogan Cc: Rob Herring , Mark Rutland , Ralf Baechle , Michael Turquette , sboyd@codeaurora.org, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , Linux-MIPS , linux-clk@vger.kernel.org, open list , Paul Cercueil , Mathieu Malaterre , Dominik Peklo List-Id: devicetree@vger.kernel.org 在 2018-03-07三的 19:14 +0530，PrasannaKumar Muralidharan写道： > > I used to get my code tested from Domink but I could not reach him > for > quite some time. Before buying the development board myself I would > like to see if anyone can help me in testing. Do you have any contact > with Ingenic who can help in testing this? > Hi PrasannaKumar I'm resently working on Ingenic chips too. Ingentic guys have sent me a X1000 development broad and it will arrive in about two weeks. I have a ejtag debugger also (but not very suit with X1000 because X1000 have different ejtag interface with standard MIPS cores, maybe we need some modification on openocd). So maybe I can help in testing this after I get my broad. Just ask if you need any help. Thanks -- Jiaxun Yang