From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH/RFT 1/3] thermal: rcar_thermal: add r8a77995 support
Date: Mon, 12 Mar 2018 05:26:33 +0900 [thread overview]
Message-ID: <1520799995-26347-2-git-send-email-ykaneko0929@gmail.com> (raw)
In-Reply-To: <1520799995-26347-1-git-send-email-ykaneko0929@gmail.com>
Add support for R-Car D3 (r8a77995) thermal sensor.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
drivers/thermal/rcar_thermal.c | 141 ++++++++++++++++++++++++++++++++---------
1 file changed, 112 insertions(+), 29 deletions(-)
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 73e5fee..d517155 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -69,6 +69,30 @@ struct rcar_thermal_priv {
u32 ctemp;
};
+enum rcar_thermal_type {
+ RCAR_THERMAL,
+ RCAR_GEN2_THERMAL,
+ RCAR_GEN3_THERMAL,
+};
+
+struct rcar_thermal_chip {
+ int use_of_thermal;
+ enum rcar_thermal_type type;
+};
+
+static const struct rcar_thermal_chip rcar_thermal = {
+ .use_of_thermal = 0,
+ .type = RCAR_THERMAL,
+};
+static const struct rcar_thermal_chip rcar_gen2_thermal = {
+ .use_of_thermal = 1,
+ .type = RCAR_GEN2_THERMAL,
+};
+static const struct rcar_thermal_chip rcar_gen3_thermal = {
+ .use_of_thermal = 1,
+ .type = RCAR_GEN3_THERMAL,
+};
+
#define rcar_thermal_for_each_priv(pos, common) \
list_for_each_entry(pos, &common->head, list)
@@ -77,13 +101,23 @@ struct rcar_thermal_priv {
#define rcar_priv_to_dev(priv) ((priv)->common->dev)
#define rcar_has_irq_support(priv) ((priv)->common->base)
#define rcar_id_to_shift(priv) ((priv)->id * 8)
-#define rcar_of_data(dev) ((unsigned long)of_device_get_match_data(dev))
-#define rcar_use_of_thermal(dev) (rcar_of_data(dev) == USE_OF_THERMAL)
+#define rcar_of_data(dev) \
+ ((struct rcar_thermal_chip *)of_device_get_match_data(dev))
+#define rcar_use_of_thermal(dev) (rcar_of_data(dev)->use_of_thermal)
-#define USE_OF_THERMAL 1
static const struct of_device_id rcar_thermal_dt_ids[] = {
- { .compatible = "renesas,rcar-thermal", },
- { .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL },
+ {
+ .compatible = "renesas,rcar-thermal",
+ .data = (void *)&rcar_thermal,
+ },
+ {
+ .compatible = "renesas,rcar-gen2-thermal",
+ .data = (void *)&rcar_gen2_thermal,
+ },
+ {
+ .compatible = "renesas,thermal-r8a77995",
+ .data = (void *)&rcar_gen3_thermal,
+ },
{},
};
MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -190,7 +224,8 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
* enable IRQ
*/
if (rcar_has_irq_support(priv)) {
- rcar_thermal_write(priv, FILONOFF, 0);
+ if (rcar_of_data(dev)->type != RCAR_GEN3_THERMAL)
+ rcar_thermal_write(priv, FILONOFF, 0);
/* enable Rising/Falling edge interrupt */
rcar_thermal_write(priv, POSNEG, 0x1);
@@ -438,6 +473,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
struct rcar_thermal_priv *priv;
struct device *dev = &pdev->dev;
struct resource *res, *irq;
+ int nirq = rcar_of_data(dev)->type == RCAR_GEN3_THERMAL ? 2 : 1;
int mres = 0;
int i;
int ret = -ENODEV;
@@ -457,19 +493,35 @@ static int rcar_thermal_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (irq) {
- /*
- * platform has IRQ support.
- * Then, driver uses common registers
- * rcar_has_irq_support() will be enabled
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
- common->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(common->base))
- return PTR_ERR(common->base);
+ for (i = 0; i < nirq; i++) {
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq)
+ continue;
+ if (!common->base) {
+ /*
+ * platform has IRQ support.
+ * Then, driver uses common registers
+ * rcar_has_irq_support() will be enabled
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ mres++);
+ common->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(common->base))
+ return PTR_ERR(common->base);
- idle = 0; /* polling delay is not needed */
+ idle = 0; /* polling delay is not needed */
+ }
+
+ ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+ IRQF_SHARED, dev_name(dev), common);
+ if (ret) {
+ dev_err(dev, "irq request failed\n ");
+ goto error_unregister;
+ }
+
+ /* update ENR bits */
+ if (rcar_of_data(dev)->type == RCAR_GEN3_THERMAL)
+ enr_bits |= 1 << i;
}
for (i = 0;; i++) {
@@ -531,20 +583,12 @@ static int rcar_thermal_probe(struct platform_device *pdev)
list_move_tail(&priv->list, &common->head);
/* update ENR bits */
- enr_bits |= 3 << (i * 8);
+ if (rcar_of_data(dev)->type != RCAR_GEN3_THERMAL)
+ enr_bits |= 3 << (i * 8);
}
- /* enable temperature comparation */
- if (irq) {
- ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
- dev_name(dev), common);
- if (ret) {
- dev_err(dev, "irq request failed\n ");
- goto error_unregister;
- }
-
+ if (enr_bits)
rcar_thermal_common_write(common, ENR, enr_bits);
- }
dev_info(dev, "%d sensor probed\n", i);
@@ -556,9 +600,48 @@ static int rcar_thermal_probe(struct platform_device *pdev)
return ret;
}
+#ifdef CONFIG_PM_SLEEP
+static int rcar_thermal_suspend(struct device *dev)
+{
+ struct rcar_thermal_common *common = dev_get_drvdata(dev);
+ struct rcar_thermal_priv *priv;
+
+ if (rcar_of_data(dev)->type == RCAR_GEN3_THERMAL) {
+ rcar_thermal_common_write(common, ENR, 0);
+ priv = list_first_entry(&common->head, typeof(*priv), list);
+ rcar_thermal_irq_disable(priv);
+ rcar_thermal_bset(priv, THSCR, CPCTL, 0);
+ }
+
+ return 0;
+}
+
+static int rcar_thermal_resume(struct device *dev)
+{
+ struct rcar_thermal_common *common = dev_get_drvdata(dev);
+ struct rcar_thermal_priv *priv;
+ int ret;
+
+ if (rcar_of_data(dev)->type == RCAR_GEN3_THERMAL) {
+ priv = list_first_entry(&common->head, typeof(*priv), list);
+ ret = rcar_thermal_update_temp(priv);
+ if (ret < 0)
+ return ret;
+ rcar_thermal_irq_enable(priv);
+ rcar_thermal_common_write(common, ENR, 0x03);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
+ rcar_thermal_resume);
+
static struct platform_driver rcar_thermal_driver = {
.driver = {
.name = "rcar_thermal",
+ .pm = &rcar_thermal_pm_ops,
.of_match_table = rcar_thermal_dt_ids,
},
.probe = rcar_thermal_probe,
--
1.9.1
next prev parent reply other threads:[~2018-03-11 20:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-11 20:26 [PATCH/RFT 0/3] thermal: add support for r8a77995 Yoshihiro Kaneko
2018-03-11 20:26 ` Yoshihiro Kaneko [this message]
2018-03-12 11:02 ` [PATCH/RFT 1/3] thermal: rcar_thermal: add r8a77995 support Geert Uytterhoeven
2018-03-13 16:59 ` Yoshihiro Kaneko
2018-03-11 20:26 ` [PATCH 2/3] dt-bindings: thermal: rcar-thermal: add R8A77995 support Yoshihiro Kaneko
2018-03-12 10:13 ` Geert Uytterhoeven
2018-03-13 16:35 ` Yoshihiro Kaneko
2018-03-11 20:26 ` [PATCH 3/3] arm64: dts: renesas: r8a77995: add thermal device support Yoshihiro Kaneko
2018-03-12 10:56 ` Geert Uytterhoeven
2018-03-13 16:41 ` Yoshihiro Kaneko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1520799995-26347-2-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).