From: Tomer Maimon <tmaimon77@gmail.com>
To: robh+dt@kernel.org, linux@armlinux.org.uk, mark.rutland@arm.com,
brendanhiggins@google.com, avifishman70@gmail.com,
julien.thierry@arm.com, pombredanne@nexb.com, arnd@arndb.de,
olof@lixom.net, khilman@kernel.org, joel@jms.id.au
Cc: devicetree@vger.kernel.org, openbmc@lists.ozlabs.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v12 1/3] arm: npcm: add basic support for Nuvoton BMCs
Date: Tue, 13 Mar 2018 15:32:09 +0200 [thread overview]
Message-ID: <1520947931-15426-2-git-send-email-tmaimon77@gmail.com> (raw)
In-Reply-To: <1520947931-15426-1-git-send-email-tmaimon77@gmail.com>
Adds basic support for the Nuvoton NPCM750 BMC.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Avi Fishman <avifishman70@gmail.com>
Tested-by: Avi Fishman <avifishman70@gmail.com>
---
arch/arm/Kconfig | 2 ++
arch/arm/Makefile | 1 +
arch/arm/mach-npcm/Kconfig | 30 ++++++++++++++++
arch/arm/mach-npcm/Makefile | 6 ++++
arch/arm/mach-npcm/headsmp.S | 17 ++++++++++
arch/arm/mach-npcm/npcm7xx.c | 23 +++++++++++++
arch/arm/mach-npcm/platsmp.c | 81 ++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 160 insertions(+)
create mode 100644 arch/arm/mach-npcm/Kconfig
create mode 100644 arch/arm/mach-npcm/Makefile
create mode 100644 arch/arm/mach-npcm/headsmp.S
create mode 100644 arch/arm/mach-npcm/npcm7xx.c
create mode 100644 arch/arm/mach-npcm/platsmp.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7e3d53575486..6a8404cd5150 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -779,6 +779,8 @@ source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/mach-npcm/Kconfig"
+
source "arch/arm/mach-nspire/Kconfig"
source "arch/arm/plat-omap/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e83f5161fdd8..e4e537f27339 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -196,6 +196,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_NSPIRE) += nspire
machine-$(CONFIG_ARCH_OXNAS) += oxnas
machine-$(CONFIG_ARCH_OMAP1) += omap1
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
new file mode 100644
index 000000000000..684c9c9a32bd
--- /dev/null
+++ b/arch/arm/mach-npcm/Kconfig
@@ -0,0 +1,30 @@
+menuconfig ARCH_NPCM
+ bool "Nuvoton NPCM Architecture"
+ depends on ARCH_MULTI_V7
+ select PINCTRL
+
+if ARCH_NPCM
+
+config ARCH_NPCM7XX
+ bool "Support for NPCM7xx BMC (Poleg)"
+ depends on ARCH_MULTI_V7
+ select PINCTRL_NPCM7XX
+ select NPCM7XX_TIMER
+ select ARCH_REQUIRE_GPIOLIB
+ select CACHE_L2X0
+ select ARM_GIC
+ select HAVE_ARM_TWD if SMP
+ select HAVE_ARM_SCU if SMP
+ select ARM_ERRATA_764369 if SMP
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_794072
+ select PL310_ERRATA_588369
+ select PL310_ERRATA_727915
+ select MFD_SYSCON
+ help
+ General support for NPCM7xx BMC (Poleg).
+
+ Nuvoton NPCM7xx BMC based on the Cortex A9.
+
+endif
diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
new file mode 100644
index 000000000000..227aebbfeb40
--- /dev/null
+++ b/arch/arm/mach-npcm/Makefile
@@ -0,0 +1,6 @@
+AFLAGS_headsmp.o += -march=armv7-a
+
+obj-$(CONFIG_ARCH_NPCM7XX) += npcm7xx.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+
+
diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
new file mode 100644
index 000000000000..c083fe09a07b
--- /dev/null
+++ b/arch/arm/mach-npcm/headsmp.S
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+/*
+ * The boot ROM does not start secondary CPUs in SVC mode, so we need to do that
+ * here.
+ */
+ENTRY(npcm7xx_secondary_startup)
+ safe_svcmode_maskall r0
+
+ b secondary_startup
+ENDPROC(npcm7xx_secondary_startup)
diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
new file mode 100644
index 000000000000..a039dc755561
--- /dev/null
+++ b/arch/arm/mach-npcm/npcm7xx.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+static const char *const npcm7xx_dt_match[] = {
+ "nuvoton,npcm750",
+ "nuvoton,npcm730",
+ NULL
+};
+
+DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family")
+ .atag_offset = 0x100,
+ .dt_compat = npcm7xx_dt_match,
+ .l2c_aux_val = 0x0,
+ .l2c_aux_mask = ~0x0,
+MACHINE_END
diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
new file mode 100644
index 000000000000..21633c70fe7f
--- /dev/null
+++ b/arch/arm/mach-npcm/platsmp.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#define pr_fmt(fmt) "nuvoton,npcm7xx-smp: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define NPCM7XX_SCRPAD_REG 0x13c
+
+extern void npcm7xx_secondary_startup(void);
+
+static int npcm7xx_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ struct device_node *gcr_np;
+ void __iomem *gcr_base;
+ int ret = 0;
+
+ gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
+ if (!gcr_np) {
+ pr_err("no gcr device node\n");
+ ret = -ENODEV;
+ goto out;
+ }
+ gcr_base = of_iomap(gcr_np, 0);
+ if (!gcr_base) {
+ pr_err("could not iomap gcr");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* give boot ROM kernel start address. */
+ iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
+ NPCM7XX_SCRPAD_REG);
+ /* make sure the previous write is seen by all observers. */
+ dsb_sev();
+
+ iounmap(gcr_base);
+out:
+ return ret;
+}
+
+static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *scu_np;
+ void __iomem *scu_base;
+
+ scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!scu_np) {
+ pr_err("no scu device node\n");
+ return;
+ }
+ scu_base = of_iomap(scu_np, 0);
+ if (!scu_base) {
+ pr_err("could not iomap scu");
+ return;
+ }
+
+ scu_enable(scu_base);
+
+ iounmap(scu_base);
+}
+
+static struct smp_operations npcm7xx_smp_ops __initdata = {
+ .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
+ .smp_boot_secondary = npcm7xx_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm750-smp", &npcm7xx_smp_ops);
--
2.14.1
next prev parent reply other threads:[~2018-03-13 13:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-13 13:32 [PATCH v12 0/3] arm: npcm: add basic support for Nuvoton BMCs Tomer Maimon
2018-03-13 13:32 ` Tomer Maimon [this message]
2018-03-13 13:32 ` [PATCH v12 2/3] arm: dts: add Nuvoton NPCM750 device tree Tomer Maimon
2018-03-13 13:32 ` [PATCH v12 3/3] MAINTAINERS: Add entry for the Nuvoton NPCM architecture Tomer Maimon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1520947931-15426-2-git-send-email-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=brendanhiggins@google.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=julien.thierry@arm.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=openbmc@lists.ozlabs.org \
--cc=pombredanne@nexb.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).