Re: [PATCH v2 4/4] clk: imx: add clock driver for i.MX8MQ CCM

[Lucas Stach <l.stach@pengutronix.de>]

Am Donnerstag, den 15.03.2018, 22:33 +0100 schrieb Sascha Hauer:
> On Thu, Feb 01, 2018 at 06:54:12PM +0100, Lucas Stach wrote:
> > Add driver for the Clock Control Module found on i.MX8MQ.
> > 
> > This is largely based on the downstream driver from Anson Huang and
> > Bai Ping at NXP, with only some small adaptions to mainline from me.
> > 
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> 
> A general thought: The i.MX8M finally has a consistent clock tree. We
> have for example 70 Peripheral clock slices consisting of a mux, a gate
> and two dividers, all 70 looking the same.
> For these it might make sense to create a more complex clock type
> providing mux, gate and set rate functionality in one clock. This would
> drastically reduce the number of clocks we have to handle.

I agree. It seems we are missing the 4.17 merge window with this
anyways, due to the large number of changes still required and time
constraints on my side, so a larger rework of the driver might be
possible if we target 4.18.

Regards,
Lucas