From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paolo Pisati Subject: [PATCH 0/2 v6] Lattice MachXO2 Slave SPI FPGA Manager support Date: Fri, 16 Mar 2018 16:54:27 +0100 Message-ID: <1521215669-23874-1-git-send-email-p.pisati@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Alan Tull , Moritz Fischer , Rob Herring , Mark Rutland Cc: linux-fpga@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi all, this series adds support for the Lattice MachXO2 FPGA chip, programmed over Slave SPI. Tested on a raspberry pi3, beaglebone black (little endian mode) and imx6 hummingboard (big endian mode) + bugblat's pif2 fpga hat (machxo2 7000HC) or tinyfpga A1/A2 (machxo2 256HC / 1200HC), in SPI slave mode with varying bus speed. Changes since v5: * fixed all the endianess issues * introduced a cleanup() path invoked in case of flash failure * moved back machxo2_write() to use a spi_sync() transaction per line write (in v5 i queued all the spi_write()s and executed a single spi_sync() at the end, but that, sometimes, resulted in the REFRESH command to fail with a CMD_ERR, depending on the SPI bus speed) Paolo Pisati (2): dt: bindings: fpga: add lattice machxo2 slave spi binding description fpga: lattice machxo2: Add Lattice MachXO2 support .../bindings/fpga/lattice-machxo2-spi.txt | 29 ++ drivers/fpga/Kconfig | 8 + drivers/fpga/Makefile | 1 + drivers/fpga/machxo2-spi.c | 410 +++++++++++++++++++++ 4 files changed, 448 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/lattice-machxo2-spi.txt create mode 100644 drivers/fpga/machxo2-spi.c -- 2.7.4