From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
Jacopo Mondi <jacopo+renesas@jmondi.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Hans Verkuil <hans.verkuil@cisco.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@s-opensource.com>
Subject: [PATCH v2 08/10] media: ov772x: handle nested s_power() calls
Date: Mon, 16 Apr 2018 11:51:49 +0900 [thread overview]
Message-ID: <1523847111-12986-9-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1523847111-12986-1-git-send-email-akinobu.mita@gmail.com>
Depending on the v4l2 driver, calling s_power() could be nested. So the
actual transitions between power saving mode and normal operation mode
should only happen at the first power on and the last power off.
This adds an s_power() nesting counter and updates the power state if the
counter is modified from 0 to != 0 or from != 0 to 0.
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v2
- New patch
drivers/media/i2c/ov772x.c | 33 +++++++++++++++++++++++++++++----
1 file changed, 29 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 4245a46..2cd6e85 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -424,6 +424,9 @@ struct ov772x_priv {
/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
unsigned short band_filter;
unsigned int fps;
+ /* lock to protect power_count */
+ struct mutex power_lock;
+ int power_count;
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_pad pad;
#endif
@@ -871,9 +874,25 @@ static int ov772x_power_off(struct ov772x_priv *priv)
static int ov772x_s_power(struct v4l2_subdev *sd, int on)
{
struct ov772x_priv *priv = to_ov772x(sd);
+ int ret = 0;
+
+ mutex_lock(&priv->power_lock);
- return on ? ov772x_power_on(priv) :
- ov772x_power_off(priv);
+ /* If the power count is modified from 0 to != 0 or from != 0 to 0,
+ * update the power state.
+ */
+ if (priv->power_count == !on)
+ ret = on ? ov772x_power_on(priv) : ov772x_power_off(priv);
+
+ if (!ret) {
+ /* Update the power count. */
+ priv->power_count += on ? 1 : -1;
+ WARN_ON(priv->power_count < 0);
+ }
+
+ mutex_unlock(&priv->power_lock);
+
+ return ret;
}
static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
@@ -1303,6 +1322,7 @@ static int ov772x_probe(struct i2c_client *client,
return -ENOMEM;
priv->info = client->dev.platform_data;
+ mutex_init(&priv->power_lock);
v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
priv->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
@@ -1314,8 +1334,10 @@ static int ov772x_probe(struct i2c_client *client,
v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0);
priv->subdev.ctrl_handler = &priv->hdl;
- if (priv->hdl.error)
- return priv->hdl.error;
+ if (priv->hdl.error) {
+ ret = priv->hdl.error;
+ goto error_mutex_destroy;
+ }
priv->clk = clk_get(&client->dev, "xclk");
if (IS_ERR(priv->clk)) {
@@ -1363,6 +1385,8 @@ static int ov772x_probe(struct i2c_client *client,
clk_put(priv->clk);
error_ctrl_free:
v4l2_ctrl_handler_free(&priv->hdl);
+error_mutex_destroy:
+ mutex_destroy(&priv->power_lock);
return ret;
}
@@ -1377,6 +1401,7 @@ static int ov772x_remove(struct i2c_client *client)
gpiod_put(priv->pwdn_gpio);
v4l2_async_unregister_subdev(&priv->subdev);
v4l2_ctrl_handler_free(&priv->hdl);
+ mutex_destroy(&priv->power_lock);
return 0;
}
--
2.7.4
next prev parent reply other threads:[~2018-04-16 2:52 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-16 2:51 [PATCH v2 00/10] media: ov772x: support media controller, device tree probing, etc Akinobu Mita
2018-04-16 2:51 ` [PATCH v2 01/10] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING Akinobu Mita
2018-04-18 10:05 ` jacopo mondi
2018-04-18 10:41 ` Sakari Ailus
2018-04-18 12:12 ` jacopo mondi
2018-04-16 2:51 ` [PATCH v2 02/10] media: ov772x: add checks for register read errors Akinobu Mita
2018-04-18 10:13 ` jacopo mondi
2018-04-16 2:51 ` [PATCH v2 03/10] media: ov772x: create subdevice device node Akinobu Mita
2018-04-16 10:56 ` Sakari Ailus
2018-04-16 2:51 ` [PATCH v2 04/10] media: ov772x: add media controller support Akinobu Mita
2018-04-18 11:28 ` jacopo mondi
2018-04-18 11:58 ` Sakari Ailus
2018-04-18 12:13 ` jacopo mondi
2018-04-18 13:05 ` Sakari Ailus
2018-04-16 2:51 ` [PATCH v2 05/10] media: ov772x: use generic names for reset and powerdown gpios Akinobu Mita
2018-04-18 11:34 ` jacopo mondi
2018-04-16 2:51 ` [PATCH v2 06/10] media: dt-bindings: ov772x: add device tree binding Akinobu Mita
2018-04-16 21:36 ` Rob Herring
2018-04-18 11:35 ` jacopo mondi
2018-04-16 2:51 ` [PATCH v2 07/10] media: ov772x: support device tree probing Akinobu Mita
2018-04-18 11:48 ` jacopo mondi
2018-04-16 2:51 ` Akinobu Mita [this message]
2018-04-18 12:41 ` [PATCH v2 08/10] media: ov772x: handle nested s_power() calls jacopo mondi
2018-04-19 16:21 ` Akinobu Mita
2018-04-16 2:51 ` [PATCH v2 09/10] media: ov772x: reconstruct s_frame_interval() Akinobu Mita
2018-04-16 2:51 ` [PATCH v2 10/10] media: ov772x: avoid accessing registers under power saving mode Akinobu Mita
2018-04-16 10:55 ` Sakari Ailus
2018-04-17 16:52 ` Akinobu Mita
2018-04-18 12:55 ` jacopo mondi
2018-04-18 13:17 ` Sakari Ailus
2018-04-18 13:34 ` jacopo mondi
2018-04-20 16:35 ` Akinobu Mita
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1523847111-12986-9-git-send-email-akinobu.mita@gmail.com \
--to=akinobu.mita@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@s-opensource.com \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).