* [PATCH] arm64: dts: correct SATA addresses for Stingray
@ 2018-04-18 8:41 Srinath Mannam
2018-04-18 18:31 ` Florian Fainelli
0 siblings, 1 reply; 2+ messages in thread
From: Srinath Mannam @ 2018-04-18 8:41 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
Scott Branden, Ray Jui, Florian Fainelli,
bcm-kernel-feedback-list
Cc: devicetree, linux-arm-kernel, linux-kernel, Srinath Mannam
Correct all SATA ahci and phy controller register
addresses and interrupt lines to proper values.
Fixes: 344a2e514182 ("arm64: dts: Add SATA DT nodes for Stingray SoC")
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Andrew Gospodarek <andrew.gospodarek@broadcom.com>
---
.../boot/dts/broadcom/stingray/stingray-sata.dtsi | 80 +++++++++++-----------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
index 4b5465d..8c68e0c 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -36,11 +36,11 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
- sata0: ahci@210000 {
+ sata0: ahci@0 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00210000 0x1000>;
+ reg = <0x00000000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -52,9 +52,9 @@
};
};
- sata_phy0: sata_phy@212100 {
+ sata_phy0: sata_phy@2100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00212100 0x1000>;
+ reg = <0x00002100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -66,11 +66,11 @@
};
};
- sata1: ahci@310000 {
+ sata1: ahci@10000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00310000 0x1000>;
+ reg = <0x00010000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -82,9 +82,9 @@
};
};
- sata_phy1: sata_phy@312100 {
+ sata_phy1: sata_phy@12100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00312100 0x1000>;
+ reg = <0x00012100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -96,11 +96,11 @@
};
};
- sata2: ahci@120000 {
+ sata2: ahci@20000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00120000 0x1000>;
+ reg = <0x00020000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -112,9 +112,9 @@
};
};
- sata_phy2: sata_phy@122100 {
+ sata_phy2: sata_phy@22100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00122100 0x1000>;
+ reg = <0x00022100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -126,11 +126,11 @@
};
};
- sata3: ahci@130000 {
+ sata3: ahci@30000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00130000 0x1000>;
+ reg = <0x00030000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -142,9 +142,9 @@
};
};
- sata_phy3: sata_phy@132100 {
+ sata_phy3: sata_phy@32100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00132100 0x1000>;
+ reg = <0x00032100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,11 +156,11 @@
};
};
- sata4: ahci@330000 {
+ sata4: ahci@100000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00330000 0x1000>;
+ reg = <0x00100000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -172,9 +172,9 @@
};
};
- sata_phy4: sata_phy@332100 {
+ sata_phy4: sata_phy@102100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00332100 0x1000>;
+ reg = <0x00102100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -186,11 +186,11 @@
};
};
- sata5: ahci@400000 {
+ sata5: ahci@110000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00400000 0x1000>;
+ reg = <0x00110000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -202,9 +202,9 @@
};
};
- sata_phy5: sata_phy@402100 {
+ sata_phy5: sata_phy@112100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00402100 0x1000>;
+ reg = <0x00112100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -216,11 +216,11 @@
};
};
- sata6: ahci@410000 {
+ sata6: ahci@120000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00410000 0x1000>;
+ reg = <0x00120000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -232,9 +232,9 @@
};
};
- sata_phy6: sata_phy@412100 {
+ sata_phy6: sata_phy@122100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00412100 0x1000>;
+ reg = <0x00122100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -246,11 +246,11 @@
};
};
- sata7: ahci@420000 {
+ sata7: ahci@130000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00420000 0x1000>;
+ reg = <0x00130000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -262,9 +262,9 @@
};
};
- sata_phy7: sata_phy@422100 {
+ sata_phy7: sata_phy@132100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00422100 0x1000>;
+ reg = <0x00132100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: correct SATA addresses for Stingray
2018-04-18 8:41 [PATCH] arm64: dts: correct SATA addresses for Stingray Srinath Mannam
@ 2018-04-18 18:31 ` Florian Fainelli
0 siblings, 0 replies; 2+ messages in thread
From: Florian Fainelli @ 2018-04-18 18:31 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Srinath Mannam, Rob Herring,
Mark Rutland, Catalin Marinas, Will Deacon, Scott Branden,
Ray Jui
Cc: devicetree, linux-arm-kernel, linux-kernel
On Wed, 18 Apr 2018 14:11:29 +0530, Srinath Mannam <srinath.mannam@broadcom.com> wrote:
> Correct all SATA ahci and phy controller register
> addresses and interrupt lines to proper values.
>
> Fixes: 344a2e514182 ("arm64: dts: Add SATA DT nodes for Stingray SoC")
>
> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> Reviewed-by: Andrew Gospodarek <andrew.gospodarek@broadcom.com>
> ---
Applied to devicetree-arm64/fixes, thanks!
--
Florian
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-04-18 18:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-04-18 8:41 [PATCH] arm64: dts: correct SATA addresses for Stingray Srinath Mannam
2018-04-18 18:31 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).