From mboxrd@z Thu Jan 1 00:00:00 1970 From: Phil Elwell Subject: [PATCH v4 3/3] dt-bindings: Document the DT bindings for lan78xx Date: Thu, 19 Apr 2018 17:59:40 +0100 Message-ID: <1524157180-27276-4-git-send-email-phil@raspberrypi.org> References: <1524157180-27276-1-git-send-email-phil@raspberrypi.org> Return-path: In-Reply-To: <1524157180-27276-1-git-send-email-phil@raspberrypi.org> Sender: netdev-owner@vger.kernel.org To: Woojung Huh , Microchip Linux Driver Support , Rob Herring , Mark Rutland , Andrew Lunn , Florian Fainelli , "David S. Miller" , Mauro Carvalho Chehab , Greg Kroah-Hartman , Linus Walleij , Andrew Morton , Randy Dunlap , Phil Elwell , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org List-Id: devicetree@vger.kernel.org The Microchip LAN78XX family of devices are Ethernet controllers with a USB interface. Despite being discoverable devices it can be useful to be able to configure them from Device Tree, particularly in low-cost applications without an EEPROM or programmed OTP. Document the supported properties in a bindings file. Signed-off-by: Phil Elwell Reviewed-by: Andrew Lunn --- .../devicetree/bindings/net/microchip,lan78xx.txt | 54 ++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt diff --git a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt new file mode 100644 index 0000000..76786a0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt @@ -0,0 +1,54 @@ +Microchip LAN78xx Gigabit Ethernet controller + +The LAN78XX devices are usually configured by programming their OTP or with +an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither. +The Device Tree properties, if present, override the OTP and EEPROM. + +Required properties: +- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850". + +Optional properties: +- local-mac-address: see ethernet.txt +- mac-address: see ethernet.txt + +Optional properties of the embedded PHY: +- microchip,led-modes: a 0..4 element vector, with each element configuring + the operating mode of an LED. Omitted LEDs are turned off. Allowed values + are defined in "include/dt-bindings/net/microchip-lan78xx.h". + +Example: + +/* Based on the configuration for a Raspberry Pi 3 B+ */ +&usb { + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: ethernet@1 { + compatible = "usb424,7800"; + reg = <1>; + local-mac-address = [ 00 11 22 33 44 55 ]; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + eth_phy: ethernet-phy@1 { + reg = <1>; + microchip,led-modes = < + LAN78XX_LINK_1000_ACTIVITY + LAN78XX_LINK_10_100_ACTIVITY + >; + }; + }; + }; + }; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index 23735d9..91cb961 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14572,6 +14572,7 @@ M: Woojung Huh M: Microchip Linux Driver Support L: netdev@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/net/microchip,lan78xx.txt F: drivers/net/usb/lan78xx.* F: include/dt-bindings/net/microchip-lan78xx.h -- 2.7.4