From: Sean Wang <sean.wang@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: robh+dt@kernel.org, mark.rutland@arm.com, marcel@holtmann.org,
johan.hedberg@gmail.com, devicetree@vger.kernel.org,
linux-bluetooth@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
Ulf Hansson <ulf.hansson@linaro.org>,
Weiyi Lu <weiyi.lu@mediatek.com>
Subject: Re: [PATCH v1 5/7] soc: mediatek: add a fixed wait for SRAM stable
Date: Fri, 20 Apr 2018 11:49:50 +0800 [thread overview]
Message-ID: <1524196190.26454.3.camel@mtkswgap22> (raw)
In-Reply-To: <5f2530a0-aee2-39fe-eb5c-56cd4a68c9db@gmail.com>
On Thu, 2018-04-19 at 12:33 +0200, Matthias Brugger wrote:
>
> On 04/03/2018 09:15 AM, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > MT7622_POWER_DOMAIN_WB doesn't send an ACK when its managed SRAM becomes
> > stable, which is not like the behavior the other power domains should
> > have. Therefore, it's necessary for such a power domain to have a fixed
> > and well-predefined duration to wait until its managed SRAM can be allowed
> > to access by all functions running on the top.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > Cc: Matthias Brugger <matthias.bgg@gmail.com>
> > Cc: Ulf Hansson <ulf.hansson@linaro.org>
> > Cc: Weiyi Lu <weiyi.lu@mediatek.com>
> > ---
> > drivers/soc/mediatek/mtk-scpsys.c | 17 ++++++++++++-----
> > 1 file changed, 12 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index f9b7248..19aceb8 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -121,6 +121,7 @@ struct scp_domain_data {
> > u32 bus_prot_mask;
> > enum clk_id clk_id[MAX_CLKS];
> > bool active_wakeup;
> > + u32 us_sram_fwait;
>
> Before adding more and more fields to scp_domain_data which get checked in if's,
> I'd prefer to add a caps field used for bus_prot_mask, active_wakeup in a first
> patch and add the cap FORCE_WAIT in a second patch.
>
> Can you help to implement this Sean, or shall I give it a try?
>
Sure, I have a willing to do and then see if you're also fond of it.
thanks!
> Regards,
> Matthias
>
> > };
> >
> > struct scp;
> > @@ -234,11 +235,16 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
> > val &= ~scpd->data->sram_pdn_bits;
> > writel(val, ctl_addr);
> >
> > - /* wait until SRAM_PDN_ACK all 0 */
> > - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0,
> > - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > - if (ret < 0)
> > - goto err_pwr_ack;
> > + /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
> > + if (!scpd->data->us_sram_fwait) {
> > + ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0,
> > + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > + if (ret < 0)
> > + goto err_pwr_ack;
> > + } else {
> > + usleep_range(scpd->data->us_sram_fwait,
> > + scpd->data->us_sram_fwait + 100);
> > + };
> >
> > if (scpd->data->bus_prot_mask) {
> > ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
> > @@ -783,6 +789,7 @@ static const struct scp_domain_data scp_domain_data_mt7622[] = {
> > .clk_id = {CLK_NONE},
> > .bus_prot_mask = MT7622_TOP_AXI_PROT_EN_WB,
> > .active_wakeup = true,
> > + .us_sram_fwait = 12000,
> > },
> > };
> >
> >
next prev parent reply other threads:[~2018-04-20 3:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-03 7:15 [PATCH v1 0/7] add support for Bluetooth on MT7622 SoC sean.wang
2018-04-03 7:15 ` [PATCH v1 1/7] dt-bindings: net: bluetooth: Add mediatek-bluetooth sean.wang
2018-04-09 21:16 ` Rob Herring
2018-04-03 7:15 ` [PATCH v1 2/7] serdev: add dev_pm_domain_attach|detach() sean.wang
2018-04-03 10:29 ` Marcel Holtmann
2018-04-26 5:29 ` Sean Wang
2018-04-03 7:15 ` [PATCH v1 3/7] soc: mediatek: reuse read[l,x]_poll_timeout helpers sean.wang
2018-04-18 15:06 ` Matthias Brugger
2018-04-03 7:15 ` [PATCH v1 4/7] soc: mediatek: reuse regmap_read_poll_timeout helpers sean.wang
2018-04-19 10:23 ` Matthias Brugger
2018-04-20 3:42 ` Sean Wang
2018-04-03 7:15 ` [PATCH v1 5/7] soc: mediatek: add a fixed wait for SRAM stable sean.wang
2018-04-05 16:42 ` Sasha Levin
2018-04-19 10:33 ` Matthias Brugger
2018-04-20 3:49 ` Sean Wang [this message]
2018-04-23 8:58 ` Sean Wang
2018-04-03 7:15 ` [PATCH v1 6/7] Bluetooth: hci_mediatek: Add protocol support for MediaTek serial devices sean.wang
2018-04-03 10:27 ` Marcel Holtmann
2018-04-26 7:34 ` Sean Wang
2018-04-26 9:47 ` Marcel Holtmann
2018-04-27 4:13 ` Sean Wang
2018-04-27 5:25 ` Marcel Holtmann
2018-04-27 9:14 ` Sean Wang
2018-04-27 16:34 ` Marcel Holtmann
2018-05-08 6:48 ` Sean Wang
2018-05-08 7:27 ` Marcel Holtmann
2018-05-08 8:22 ` Sean Wang
2018-05-08 11:18 ` Marcel Holtmann
2018-05-10 6:45 ` Sean Wang
2018-04-03 12:13 ` [RFC PATCH] Bluetooth: hci_mediatek: mtk_recv_frame() can be static kbuild test robot
2018-04-03 12:13 ` [PATCH v1 6/7] Bluetooth: hci_mediatek: Add protocol support for MediaTek serial devices kbuild test robot
2018-04-03 7:15 ` [PATCH v1 7/7] MAINTAINERS: add an entry for MediaTek Bluetooth driver sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1524196190.26454.3.camel@mtkswgap22 \
--to=sean.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=marcel@holtmann.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=weiyi.lu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).