devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mauro Carvalho Chehab <mchehab@s-opensource.com>
Subject: [PATCH v3 10/11] media: ov772x: make set_fmt() return -EBUSY while streaming
Date: Mon, 23 Apr 2018 00:56:16 +0900	[thread overview]
Message-ID: <1524412577-14419-11-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1524412577-14419-1-git-send-email-akinobu.mita@gmail.com>

The ov772x driver is going to offer a V4L2 sub-device interface, so
changing the output data format on this sub-device can be made anytime.
However, the request is preferred to fail while the video stream on the
device is active.

Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v3
- New patch

 drivers/media/i2c/ov772x.c | 35 ++++++++++++++++++++++++++---------
 1 file changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 96dd37a..c9fdc67 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -424,9 +424,10 @@ struct ov772x_priv {
 	/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
 	unsigned short                    band_filter;
 	unsigned int			  fps;
-	/* lock to protect power_count */
+	/* lock to protect power_count and streaming */
 	struct mutex			  lock;
 	int				  power_count;
+	int				  streaming;
 #ifdef CONFIG_MEDIA_CONTROLLER
 	struct media_pad pad;
 #endif
@@ -603,18 +604,28 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov772x_priv *priv = to_ov772x(sd);
+	int ret = 0;
 
-	if (!enable) {
-		ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
-		return 0;
-	}
+	mutex_lock(&priv->lock);
 
-	ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0);
+	if (priv->streaming == enable)
+		goto done;
 
-	dev_dbg(&client->dev, "format %d, win %s\n",
-		priv->cfmt->code, priv->win->name);
+	ret = ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE,
+			      enable ? 0 : SOFT_SLEEP_MODE);
+	if (ret)
+		goto done;
 
-	return 0;
+	if (enable) {
+		dev_dbg(&client->dev, "format %d, win %s\n",
+			priv->cfmt->code, priv->win->name);
+	}
+	priv->streaming = enable;
+
+done:
+	mutex_unlock(&priv->lock);
+
+	return ret;
 }
 
 static unsigned int ov772x_select_fps(struct ov772x_priv *priv,
@@ -1223,6 +1234,12 @@ static int ov772x_set_fmt(struct v4l2_subdev *sd,
 	}
 
 	mutex_lock(&priv->lock);
+
+	if (priv->streaming) {
+		ret = -EBUSY;
+		goto error;
+	}
+
 	/*
 	 * If the device is not powered up by the host driver do
 	 * not apply any changes to H/W at this time. Instead
-- 
2.7.4


  parent reply	other threads:[~2018-04-22 15:57 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-22 15:56 [PATCH v3 00/11] media: ov772x: support media controller, device tree probing, etc Akinobu Mita
2018-04-22 15:56 ` [PATCH v3 01/11] media: dt-bindings: ov772x: add device tree binding Akinobu Mita
2018-04-23  9:17   ` Laurent Pinchart
2018-04-23 15:54     ` Akinobu Mita
2018-04-25 16:19       ` Akinobu Mita
2018-04-25 22:40         ` Laurent Pinchart
2018-04-26 16:17           ` Akinobu Mita
2018-04-26 18:11             ` jacopo mondi
2018-04-26 21:34             ` Laurent Pinchart
2018-04-27 17:15               ` Akinobu Mita
2018-04-22 15:56 ` [PATCH v3 02/11] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING Akinobu Mita
2018-04-23  9:18   ` Laurent Pinchart
2018-04-23 15:55     ` Akinobu Mita
2018-04-23 19:41       ` Laurent Pinchart
2018-04-23 20:11         ` Wolfram Sang
2018-04-23 20:21           ` Laurent Pinchart
2018-04-23 20:36             ` Wolfram Sang
2018-04-23 20:51               ` Laurent Pinchart
2018-04-24 10:04                 ` Sakari Ailus
2018-04-26 12:32                 ` Wolfram Sang
2018-04-22 15:56 ` [PATCH v3 03/11] media: ov772x: add checks for register read errors Akinobu Mita
2018-04-22 15:56 ` [PATCH v3 04/11] media: ov772x: add media controller support Akinobu Mita
2018-04-22 15:56 ` [PATCH v3 05/11] media: ov772x: use generic names for reset and powerdown gpios Akinobu Mita
2018-04-22 15:56 ` [PATCH v3 06/11] media: ov772x: support device tree probing Akinobu Mita
2018-04-22 15:56 ` [PATCH v3 07/11] media: ov772x: handle nested s_power() calls Akinobu Mita
2018-04-23  8:35   ` jacopo mondi
2018-04-27 17:20     ` Akinobu Mita
2018-04-22 15:56 ` [PATCH v3 08/11] media: ov772x: reconstruct s_frame_interval() Akinobu Mita
2018-04-22 15:56 ` [PATCH v3 09/11] media: ov772x: avoid accessing registers under power saving mode Akinobu Mita
2018-04-22 15:56 ` Akinobu Mita [this message]
2018-04-22 15:56 ` [PATCH v3 11/11] media: ov772x: create subdevice device node Akinobu Mita

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1524412577-14419-11-git-send-email-akinobu.mita@gmail.com \
    --to=akinobu.mita@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@s-opensource.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).