From: "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
To: lgirdwood@gmail.com, broonie@kernel.org, sre@kernel.org,
lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org,
"Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
Subject: [PATCH 4/4] dt-bindings: mfd: max8998: Add charger subnode binding
Date: Fri, 27 Apr 2018 18:03:02 +0200 [thread overview]
Message-ID: <1524844982-4714-5-git-send-email-pawel.mikolaj.chmiel@gmail.com> (raw)
In-Reply-To: <1524844982-4714-1-git-send-email-pawel.mikolaj.chmiel@gmail.com>
This patch adds devicetree bindings documentation for
battery charging controller as the subnode of MAX8998 PMIC.
It's based on current behavior of driver.
Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
Documentation/devicetree/bindings/mfd/max8998.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
index 23a3650ff2a2..f95610afb57f 100644
--- a/Documentation/devicetree/bindings/mfd/max8998.txt
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -50,6 +50,21 @@ Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
for buck2 regulator that can be selected using dvs gpio.
+Charger: Configuration for battery charging controller should be added
+inside a child node named 'charger'.
+ Required properties:
+ - max8998,charge-eoc: Setup "End of Charge". If value equals 0,
+ remain value set from bootloader or default value will be used.
+ Valid values: 0, 10 - 45
+
+ - max8998,charge-restart: Setup "Charge Restart Level". If value equals 0,
+ remain value set from bootloader or default value will be used.
+ Valid values: -1, 0, 100, 150, 200
+
+ - max8998,charge-timeout: Setup "Charge Full Timeout". If value equals 0,
+ remain value set from bootloader or default value will be used.
+ Valid values: -1, 0, 5, 6, 7
+
Regulators: All the regulators of MAX8998 to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
by a child node of the 'regulators' node.
@@ -99,6 +114,13 @@ Example:
max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
+ /* Charger configuration */
+ charger {
+ max8998,charge-eoc = <0>;
+ max8998,charge-restart = <(-1)>;
+ max8998,charge-timeout = <7>;
+ };
+
/* Regulators to instantiate */
regulators {
ldo2_reg: LDO2 {
--
2.7.4
next prev parent reply other threads:[~2018-04-27 16:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-27 16:02 [PATCH 0/4] mfd: max8998: Device Tree support fixes Paweł Chmiel
2018-04-27 16:02 ` [PATCH 1/4] regulator: max8998: Fix platform data retrieval Paweł Chmiel
2018-04-27 16:03 ` [PATCH 2/4] power: supply: max8998-charger: " Paweł Chmiel
2018-04-27 16:03 ` [PATCH 3/4] power: supply: max8998-charger: Parse device tree for required data Paweł Chmiel
2018-04-27 16:03 ` Paweł Chmiel [this message]
2018-04-30 12:30 ` [PATCH 4/4] dt-bindings: mfd: max8998: Add charger subnode binding Lee Jones
2018-04-30 14:59 ` Paweł Chmiel
2018-05-01 12:45 ` Sebastian Reichel
2018-05-01 14:43 ` Paweł Chmiel
2019-01-10 17:47 ` Sylwester Nawrocki
2019-01-10 20:11 ` Paweł Chmiel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1524844982-4714-5-git-send-email-pawel.mikolaj.chmiel@gmail.com \
--to=pawel.mikolaj.chmiel@gmail.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).