* [PATCH 3/5] arm64: dts: imx: add imx8qxp support [not found] <1524855977-15719-1-git-send-email-aisheng.dong@nxp.com> @ 2018-04-27 19:06 ` Dong Aisheng 2018-04-30 5:54 ` Mark Rutland 2018-05-01 15:55 ` Rob Herring 0 siblings, 2 replies; 6+ messages in thread From: Dong Aisheng @ 2018-04-27 19:06 UTC (permalink / raw) To: linux-arm-kernel Cc: Dong Aisheng, Mark Rutland, dongas86, devicetree, catalin.marinas, will.deacon, robh+dt, linux-imx, kernel, fabio.estevam, shawnguo Add imx8qxp support Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- Documentation/devicetree/bindings/arm/fsl.txt | 5 + arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi | 66 ++ arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts | 138 ++++ arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi | 794 ++++++++++++++++++++++ include/dt-bindings/power/imx-rsrc.h | 558 +++++++++++++++ 6 files changed, 1562 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi create mode 100644 include/dt-bindings/power/imx-rsrc.h diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index cdb9dd7..e9aea78 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -53,6 +53,11 @@ i.MX6 Quad SABRE Automotive Board Required root node properties: - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; +i.MX8QXP MEK Board +Required root node properties: + - compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + + Generic i.MX boards ------------------- diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 86e18ad..2622da7 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_SOC_IMX8QXP) += fsl-imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi b/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi new file mode 100644 index 0000000..3a3569f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017~2018 NXP + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/{ + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* We have 1 clusters having 4 Cortex-A35 cores */ + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, <&A35_3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + cpu_suspend = <0xc4000001>; + cpu_off = <0xc4000002>; + cpu_on = <0xc4000003>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts new file mode 100644 index 0000000..920018e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017~2018 NXP + */ + +/dts-v1/; + +#include "fsl-imx8qxp.dtsi" + +/ { + model = "Freescale i.MX8QXP MEK"; + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + + chosen { + stdout-path = &dma_lpuart0; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usdhc2_vmmc: usdhc2_vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + }; +}; + +&dma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + at803x,eee-disabled; + at803x,vddio-1p8v; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + at803x,eee-disabled; + at803x,vddio-1p8v; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 + SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi new file mode 100644 index 0000000..d7cc836 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi @@ -0,0 +1,794 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017~2018 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8qxp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pads-imx8qxp.h> +#include <dt-bindings/power/imx-rsrc.h> + +#include "fsl-imx8-ca35.dtsi" + +/ { + compatible = "fsl,imx8qxp"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &dma_lpuart0; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ + clock-frequency = <8000000>; + }; + + scu { + compatible = "nxp,imx8qxp-scu", "simple-bus"; + fsl,mu = <&lsio_mu0>; + + clk: clk { + compatible = "fsl,imx8qxp-clk"; + #clock-cells = <1>; + }; + + iomuxc: iomuxc { + compatible = "fsl,imx8qxp-iomuxc"; + }; + + imx8qx-pm { + #address-cells = <1>; + #size-cells = <0>; + + pd_lsio: PD_LSIO { + compatible = "nxp,imx8qxp-pd"; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_lsio_pwm0: lsio_pwm0@SC_R_PWM_0 { + reg = <SC_R_PWM_0>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_pwm1: lsio_pwm1@SC_R_PWM_1 { + reg = <SC_R_PWM_1>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_pwm2: lsio_pwm2@SC_R_PWM_2 { + reg = <SC_R_PWM_2>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_pwm3: lsio_pwm3@SC_R_PWM_3 { + reg = <SC_R_PWM_3>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_pwm4: lsio_pwm4@SC_R_PWM_4 { + reg = <SC_R_PWM_4>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_pwm5: lsio_pwm5@SC_R_PWM_5 { + reg = <SC_R_PWM_5>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_pwm6: lsio_pwm6@SC_R_PWM_6 { + reg = <SC_R_PWM_6>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_pwm7: lsio_pwm7@SC_R_PWM_7 { + reg = <SC_R_PWM_7>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_kpp: lsio_kpp@SC_R_KPP { + reg = <SC_R_KPP>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio0: lsio_gpio0@SC_R_GPIO_0 { + reg = <SC_R_GPIO_0>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio1: lsio_gpio1@SC_R_GPIO_1 { + reg = <SC_R_GPIO_1>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio2: lsio_gpio2@SC_R_GPIO_2 { + reg = <SC_R_GPIO_2>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio3: lsio_gpio3@SC_R_GPIO_3 { + reg = <SC_R_GPIO_3>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio4: lsio_gpio4@SC_R_GPIO_4 { + reg = <SC_R_GPIO_4>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio5: lsio_gpio5@SC_R_GPIO_5 { + reg = <SC_R_GPIO_5>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio6: lsio_gpio6@SC_R_GPIO_6 { + reg = <SC_R_GPIO_6>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio7: lsio_gpio7@SC_R_GPIO_7 { + reg = <SC_R_GPIO_7>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpt0: lsio_gpt0@SC_R_GPT_0 { + reg = <SC_R_GPT_0>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpt1: lsio_gpt1@SC_R_GPT_1 { + reg = <SC_R_GPT_1>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpt2: lsio_gpt2@SC_R_GPT_2 { + reg = <SC_R_GPT_2>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpt3: lsio_gpt3@SC_R_GPT_3 { + reg = <SC_R_GPT_3>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpt4: lsio_gpt4@SC_R_GPT_4 { + reg = <SC_R_GPT_4>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_flexspi0: lsio_fspi0@SC_R_FSPI_0 { + reg = <SC_R_FSPI_0>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_flexspi1: lsio_fspi1@SC_R_FSPI_1 { + reg = <SC_R_FSPI_1>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + }; + + pd_conn: connectivity_power_domain { + compatible = "nxp,imx8qxp-pd"; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_conn_usbotg0: conn_usb0@SC_R_USB_0 { + reg = <SC_R_USB_0>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_usbotg0_phy: conn_usb0_phy@SC_R_USB_0_PHY { + reg = <SC_R_USB_0_PHY>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_usbotg1: conn_usb1@SC_R_USB_1 { + reg = <SC_R_USB_1>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_usb2: conn_usb2@SC_R_USB_2 { + reg = <SC_R_USB_2>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_usb2_phy: conn_usb2_phy@SC_R_USB_2_PHY { + reg = <SC_R_USB_2_PHY>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_sdhc0: conn_sdhc0@SC_R_SDHC_0 { + reg = <SC_R_SDHC_0>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_sdhc1: conn_sdhc1@SC_R_SDHC_1 { + reg = <SC_R_SDHC_1>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_sdhc2: conn_sdhc2@SC_R_SDHC_2 { + reg = <SC_R_SDHC_2>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_enet0: conn_enet0@SC_R_ENET_0 { + reg = <SC_R_ENET_0>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_enet1: conn_enet1@SC_R_ENET_1 { + reg = <SC_R_ENET_1>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_nand: conn_nand@SC_R_NAND { + reg = <SC_R_NAND>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_mlb0: conn_mlb0@SC_R_MLB_0 { + reg = <SC_R_MLB_0>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_edma_ch0: conn_dma4_ch0@SC_R_DMA_4_CH0 { + reg = <SC_R_DMA_4_CH0>; + #power-domain-cells = <0>; + power-domains =<&pd_conn>; + }; + pd_conn_edma_ch1: conn_dma4_ch1@SC_R_DMA_4_CH1 { + reg = <SC_R_DMA_4_CH1>; + #power-domain-cells = <0>; + power-domains =<&pd_conn>; + }; + pd_conn_edma_ch2: conn_dma4_ch2@SC_R_DMA_4_CH2 { + reg = <SC_R_DMA_4_CH2>; + #power-domain-cells = <0>; + power-domains =<&pd_conn>; + }; + pd_conn_edma_ch3: conn_dma4_ch3@SC_R_DMA_4_CH3 { + reg = <SC_R_DMA_4_CH3>; + #power-domain-cells = <0>; + power-domains =<&pd_conn>; + }; + pd_conn_edma_ch4: conn_dma4_ch4@SC_R_DMA_4_CH4 { + reg = <SC_R_DMA_4_CH4>; + #power-domain-cells = <0>; + power-domains =<&pd_conn>; + }; + }; + + pd_dma: dma_power_domain { + compatible = "nxp,imx8qxp-pd"; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_dma_flexcan0: dma_flexcan0@SC_R_CAN_0 { + reg = <SC_R_CAN_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_flexcan1: dma_flexcan1@SC_R_CAN_1 { + reg = <SC_R_CAN_1>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_flexcan2: dma_flexcan2@SC_R_CAN_2 { + reg = <SC_R_CAN_2>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_ftm0: dma_ftm0@SC_R_FTM_0 { + reg = <SC_R_FTM_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_ftm1: dma_ftm1@SC_R_FTM_1 { + reg = <SC_R_FTM_1>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_adc0: dma_adc0@SC_R_ADC_0 { + reg = <SC_R_ADC_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpi2c0: dma_lpi2c0@SC_R_I2C_0 { + reg = <SC_R_I2C_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpi2c1: dma_lpi2c1@SC_R_I2C_1 { + reg = <SC_R_I2C_1>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpi2c2: dma_lpi2c2@SC_R_I2C_2 { + reg = <SC_R_I2C_2>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpi2c3: dma_lpi2c3@SC_R_I2C_3 { + reg = <SC_R_I2C_3>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpuart0: dma_lpuart0@SC_R_UART_0 { + reg = <SC_R_UART_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpuart1: dma_lpuart1@SC_R_UART_1 { + reg = <SC_R_UART_1>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpuart2: dma_lpuart2@SC_R_UART_2 { + reg = <SC_R_UART_2>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpuart3: dma_lpuart3@SC_R_UART_3 { + reg = <SC_R_UART_3>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpspi0: dma_spi0@SC_R_SPI_0 { + reg = <SC_R_SPI_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpspi1: dma_spi1@SC_R_SPI_1 { + reg = <SC_R_SPI_1>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpspi2: dma_spi2@SC_R_SPI_2 { + reg = <SC_R_SPI_2>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpspi3: dma_spi3@SC_R_SPI_3 { + reg = <SC_R_SPI_3>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_pwm0: dma_pwm0@SC_R_LCD_0_PWM_0 { + reg = <SC_R_LCD_0_PWM_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lcd0: dma_lcd0@SC_R_LCD_0 { + reg = <SC_R_LCD_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + }; + + pd_gpu: gpu-power-domain { + compatible = "nxp,imx8qxp-pd"; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_gpu0: gpu0@SC_R_GPU_0_PID0 { + reg = <SC_R_GPU_0_PID0>; + #power-domain-cells = <0>; + power-domains =<&pd_gpu>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + pd_vpu: vpu-power-domain@SC_R_VPU_PID0 { + compatible = "nxp,imx8qxp-pd"; + reg = <SC_R_VPU_PID0>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_vpu_core: vpu_core@SC_R_VPUCORE { + reg = <SC_R_VPUCORE>; + #power-domain-cells = <0>; + power-domains =<&pd_vpu>; + }; + }; + + pd_hsio: hsio-power-domain { + compatible = "nxp,imx8qxp-pd"; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_pcie: hsio-pcie-pd@SC_R_PCIE_A { + reg = <SC_R_PCIE_A>; + #power-domain-cells = <0>; + power-domains =<&pd_hsio>; + }; + }; + + pd_dc: dc-power-domain { + compatible = "nxp,imx8qxp-pd"; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_dc0: dc0-power-domain@SC_R_DC_0 { + reg = <SC_R_DC_0>; + #power-domain-cells = <0>; + power-domains =<&pd_dc>; + }; + }; + + pd_mipi_dsi: mipi0_dsi_power_domain@SC_R_MIPI_0 { + compatible = "nxp,imx8qxp-pd"; + reg = <SC_R_MIPI_0>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_mipi_dsi_i2c0: mipi0_dsi_i2c0@SC_R_MIPI_0_I2C_0 { + reg = <SC_R_MIPI_0_I2C_0>; + power-domains =<&pd_mipi_dsi>; + }; + pd_mipi_dsi_i2c1: mipi0_dsi_i2c1@SC_R_MIPI_0_I2C_1 { + reg = <SC_R_MIPI_0_I2C_1>; + power-domains =<&pd_mipi_dsi>; + }; + pd_mipi_pwm0: mipi0_dsi_pwm0@SC_R_MIPI_0_PWM_0 { + reg = <SC_R_MIPI_0_PWM_0>; + power-domains =<&pd_mipi_dsi>; + }; + }; + + pd_mipi_csi: mipi_csi0_power_domain@SC_R_CSI_0 { + compatible = "nxp,imx8qxp-pd"; + reg = <SC_R_CSI_0>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_mipi_csi0_i2c0: mipi_csi0_i2c@SC_R_CSI_0_I2C_0 { + reg = <SC_R_CSI_0_I2C_0>; + power-domains =<&pd_mipi_csi>; + }; + pd_mipi_csi0_pwm0: mipi_csi0_pwm@SC_R_CSI_0_PWM_0 { + reg = <SC_R_CSI_0_PWM_0>; + power-domains =<&pd_mipi_csi>; + }; + }; + }; + }; + + gpu: gpu@53100000 { + compatible = "fsl,imx8qxp-gpu", "fsl,imx8x-gpu"; + reg = <0x0 0x53100000 0 0x40000>, + <0x0 0x80000000 0x0 0x08000000>, + <0x0 0x0 0x0 0x2000000>; + reg-names = "iobase_3d_0", "phys_baseaddr", + "contiguous_mem"; + interrupts = <0 64 0x4>; + interrupt-names = "irq_3d_0"; + clocks = <&clk IMX8QXP_GPU0_CORE_CLK>, + <&clk IMX8QXP_GPU0_SHADER_CLK>; + clock-names = "clk_core_3d_0", "clk_shader_3d_0"; + assigned-clocks = <&clk IMX8QXP_GPU0_CORE_CLK>, + <&clk IMX8QXP_GPU0_SHADER_CLK>; + assigned-clock-rates = <650000000>, <700000000>; + status = "disabled"; + }; + + audio_subsys: audio@59000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x59000000 0x0 0x1000000>; + ranges; + }; + + dma_subsys: dma@5a000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x5a000000 0x0 0x1000000>; + ranges; + + dma_lpuart0: serial@5a060000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x0 0x5a060000 0x0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_UART0_CLK>; + clock-names = "ipg"; + status = "disabled"; + }; + + dma_i2c0: i2c@5a800000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a800000 0x0 0x4000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_I2C0_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX8QXP_I2C0_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c0>; + status = "disabled"; + }; + + dma_i2c1: i2c@5a810000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a810000 0x0 0x4000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_I2C1_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX8QXP_I2C1_CLK>; + assigned-clock-rates = <24000000>; + status = "disabled"; + }; + + dma_i2c2: i2c@5a820000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a820000 0x0 0x4000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_I2C2_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX8QXP_I2C2_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c2>; + status = "disabled"; + }; + + dma_i2c3: i2c@5a830000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a830000 0x0 0x4000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_I2C3_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX8QXP_I2C3_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c3>; + status = "disabled"; + }; + }; + + conn_subsys: conn@5b000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x5b000000 0x0 0x1000000>; + ranges; + + usdhc1: usdhc@5b010000 { + compatible = "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x5b010000 0x0 0x10000>; + clocks = <&clk IMX8QXP_SDHC0_IPG_CLK>, + <&clk IMX8QXP_SDHC0_CLK>, + <&clk IMX8QXP_CLK_DUMMY>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX8QXP_SDHC0_DIV>; + assigned-clock-rates = <200000000>; + power-domains = <&pd_conn_sdhc0>; + status = "disabled"; + }; + + usdhc2: usdhc@5b020000 { + compatible = "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x5b020000 0x0 0x10000>; + clocks = <&clk IMX8QXP_SDHC1_IPG_CLK>, + <&clk IMX8QXP_SDHC1_CLK>, + <&clk IMX8QXP_CLK_DUMMY>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX8QXP_SDHC1_DIV>; + assigned-clock-rates = <200000000>; + power-domains = <&pd_conn_sdhc1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: usdhc@5b030000 { + compatible = "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x5b030000 0x0 0x10000>; + clocks = <&clk IMX8QXP_SDHC2_IPG_CLK>, + <&clk IMX8QXP_SDHC2_CLK>, + <&clk IMX8QXP_CLK_DUMMY>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX8QXP_SDHC2_DIV>; + assigned-clock-rates = <200000000>; + power-domains = <&pd_conn_sdhc2>; + status = "disabled"; + }; + + fec1: ethernet@5b040000 { + compatible = "fsl,imx6sx-fec"; + reg = <0x0 0x5b040000 0x0 0x10000>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8QXP_ENET0_IPG_CLK>, <&clk IMX8QXP_ENET0_AHB_CLK>, <&clk IMX8QXP_ENET0_TX_CLK>, + <&clk IMX8QXP_ENET0_PTP_CLK>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + assigned-clocks = <&clk IMX8QXP_ENET0_REF_DIV>, <&clk IMX8QXP_ENET0_PTP_CLK>; + assigned-clock-rates = <125000000>, <125000000>; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd_conn_enet0>; + status = "disabled"; + }; + + fec2: ethernet@5b050000 { + compatible = "fsl,imx8qxp-fec"; + reg = <0x0 0x5b050000 0x0 0x10000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8QXP_ENET1_IPG_CLK>, <&clk IMX8QXP_ENET1_AHB_CLK>, <&clk IMX8QXP_ENET1_TX_CLK>, + <&clk IMX8QXP_ENET1_PTP_CLK>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + assigned-clocks = <&clk IMX8QXP_ENET1_REF_DIV>, <&clk IMX8QXP_ENET1_PTP_CLK>; + assigned-clock-rates = <125000000>, <125000000>; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd_conn_enet1>; + status = "disabled"; + }; + }; + + db_subsys: db@5c000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x5c000000 0x0 0x1000000>; + ranges; + + ddr_pmu0: ddr_pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x0 0x5c020000 0x0 0x10000>; + }; + }; + + lsio_subsys: lsio@5d000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x5d000000 0x0 0x1000000>; + ranges; + + lsio_mu0: mu@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x0 0x5d1b0000 0x0 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + }; + + lsio_gpio0: gpio@5d080000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d080000 0x0 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lsio_gpio1: gpio@5d090000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d090000 0x0 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lsio_gpio2: gpio@5d0a0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0a0000 0x0 0x10000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lsio_gpio3: gpio@5d0b0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0b0000 0x0 0x10000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lsio_gpio4: gpio@5d0c0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0c0000 0x0 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lsio_gpio5: gpio@5d0d0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0d0000 0x0 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lsio_gpio6: gpio@5d0e0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0e0000 0x0 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lsio_gpio7: gpio@5d0f0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0f0000 0x0 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + hsio_subsys: hsio@5f000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x5f000000 0x0 0x1000000>; + ranges; + }; + +}; diff --git a/include/dt-bindings/power/imx-rsrc.h b/include/dt-bindings/power/imx-rsrc.h new file mode 100644 index 0000000..b4d0980 --- /dev/null +++ b/include/dt-bindings/power/imx-rsrc.h @@ -0,0 +1,558 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017~2018 NXP + */ + +#ifndef __DT_BINDINGS_RSCRC_IMX_H +#define __DT_BINDINGS_RSCRC_IMX_H + +/* + * These defines are used to indicate a resource. Resources include peripherals + * and bus masters (but not memory regions). Note items from list should + * never be changed or removed (only added to at the end of the list). + */ +#define SC_R_A53 0 +#define SC_R_A53_0 1 +#define SC_R_A53_1 2 +#define SC_R_A53_2 3 +#define SC_R_A53_3 4 +#define SC_R_A72 5 +#define SC_R_A72_0 6 +#define SC_R_A72_1 7 +#define SC_R_A72_2 8 +#define SC_R_A72_3 9 +#define SC_R_CCI 10 +#define SC_R_DB 11 +#define SC_R_DRC_0 12 +#define SC_R_DRC_1 13 +#define SC_R_GIC_SMMU 14 +#define SC_R_IRQSTR_M4_0 15 +#define SC_R_IRQSTR_M4_1 16 +#define SC_R_SMMU 17 +#define SC_R_GIC 18 +#define SC_R_DC_0_BLIT0 19 +#define SC_R_DC_0_BLIT1 20 +#define SC_R_DC_0_BLIT2 21 +#define SC_R_DC_0_BLIT_OUT 22 +#define SC_R_DC_0_CAPTURE0 23 +#define SC_R_DC_0_CAPTURE1 24 +#define SC_R_DC_0_WARP 25 +#define SC_R_DC_0_INTEGRAL0 26 +#define SC_R_DC_0_INTEGRAL1 27 +#define SC_R_DC_0_VIDEO0 28 +#define SC_R_DC_0_VIDEO1 29 +#define SC_R_DC_0_FRAC0 30 +#define SC_R_DC_0_FRAC1 31 +#define SC_R_DC_0 32 +#define SC_R_GPU_2_PID0 33 +#define SC_R_DC_0_PLL_0 34 +#define SC_R_DC_0_PLL_1 35 +#define SC_R_DC_1_BLIT0 36 +#define SC_R_DC_1_BLIT1 37 +#define SC_R_DC_1_BLIT2 38 +#define SC_R_DC_1_BLIT_OUT 39 +#define SC_R_DC_1_CAPTURE0 40 +#define SC_R_DC_1_CAPTURE1 41 +#define SC_R_DC_1_WARP 42 +#define SC_R_DC_1_INTEGRAL0 43 +#define SC_R_DC_1_INTEGRAL1 44 +#define SC_R_DC_1_VIDEO0 45 +#define SC_R_DC_1_VIDEO1 46 +#define SC_R_DC_1_FRAC0 47 +#define SC_R_DC_1_FRAC1 48 +#define SC_R_DC_1 49 +#define SC_R_GPU_3_PID0 50 +#define SC_R_DC_1_PLL_0 51 +#define SC_R_DC_1_PLL_1 52 +#define SC_R_SPI_0 53 +#define SC_R_SPI_1 54 +#define SC_R_SPI_2 55 +#define SC_R_SPI_3 56 +#define SC_R_UART_0 57 +#define SC_R_UART_1 58 +#define SC_R_UART_2 59 +#define SC_R_UART_3 60 +#define SC_R_UART_4 61 +#define SC_R_EMVSIM_0 62 +#define SC_R_EMVSIM_1 63 +#define SC_R_DMA_0_CH0 64 +#define SC_R_DMA_0_CH1 65 +#define SC_R_DMA_0_CH2 66 +#define SC_R_DMA_0_CH3 67 +#define SC_R_DMA_0_CH4 68 +#define SC_R_DMA_0_CH5 69 +#define SC_R_DMA_0_CH6 70 +#define SC_R_DMA_0_CH7 71 +#define SC_R_DMA_0_CH8 72 +#define SC_R_DMA_0_CH9 73 +#define SC_R_DMA_0_CH10 74 +#define SC_R_DMA_0_CH11 75 +#define SC_R_DMA_0_CH12 76 +#define SC_R_DMA_0_CH13 77 +#define SC_R_DMA_0_CH14 78 +#define SC_R_DMA_0_CH15 79 +#define SC_R_DMA_0_CH16 80 +#define SC_R_DMA_0_CH17 81 +#define SC_R_DMA_0_CH18 82 +#define SC_R_DMA_0_CH19 83 +#define SC_R_DMA_0_CH20 84 +#define SC_R_DMA_0_CH21 85 +#define SC_R_DMA_0_CH22 86 +#define SC_R_DMA_0_CH23 87 +#define SC_R_DMA_0_CH24 88 +#define SC_R_DMA_0_CH25 89 +#define SC_R_DMA_0_CH26 90 +#define SC_R_DMA_0_CH27 91 +#define SC_R_DMA_0_CH28 92 +#define SC_R_DMA_0_CH29 93 +#define SC_R_DMA_0_CH30 94 +#define SC_R_DMA_0_CH31 95 +#define SC_R_I2C_0 96 +#define SC_R_I2C_1 97 +#define SC_R_I2C_2 98 +#define SC_R_I2C_3 99 +#define SC_R_I2C_4 100 +#define SC_R_ADC_0 101 +#define SC_R_ADC_1 102 +#define SC_R_FTM_0 103 +#define SC_R_FTM_1 104 +#define SC_R_CAN_0 105 +#define SC_R_CAN_1 106 +#define SC_R_CAN_2 107 +#define SC_R_DMA_1_CH0 108 +#define SC_R_DMA_1_CH1 109 +#define SC_R_DMA_1_CH2 110 +#define SC_R_DMA_1_CH3 111 +#define SC_R_DMA_1_CH4 112 +#define SC_R_DMA_1_CH5 113 +#define SC_R_DMA_1_CH6 114 +#define SC_R_DMA_1_CH7 115 +#define SC_R_DMA_1_CH8 116 +#define SC_R_DMA_1_CH9 117 +#define SC_R_DMA_1_CH10 118 +#define SC_R_DMA_1_CH11 119 +#define SC_R_DMA_1_CH12 120 +#define SC_R_DMA_1_CH13 121 +#define SC_R_DMA_1_CH14 122 +#define SC_R_DMA_1_CH15 123 +#define SC_R_DMA_1_CH16 124 +#define SC_R_DMA_1_CH17 125 +#define SC_R_DMA_1_CH18 126 +#define SC_R_DMA_1_CH19 127 +#define SC_R_DMA_1_CH20 128 +#define SC_R_DMA_1_CH21 129 +#define SC_R_DMA_1_CH22 130 +#define SC_R_DMA_1_CH23 131 +#define SC_R_DMA_1_CH24 132 +#define SC_R_DMA_1_CH25 133 +#define SC_R_DMA_1_CH26 134 +#define SC_R_DMA_1_CH27 135 +#define SC_R_DMA_1_CH28 136 +#define SC_R_DMA_1_CH29 137 +#define SC_R_DMA_1_CH30 138 +#define SC_R_DMA_1_CH31 139 +#define SC_R_UNUSED1 140 +#define SC_R_UNUSED2 141 +#define SC_R_UNUSED3 142 +#define SC_R_UNUSED4 143 +#define SC_R_GPU_0_PID0 144 +#define SC_R_GPU_0_PID1 145 +#define SC_R_GPU_0_PID2 146 +#define SC_R_GPU_0_PID3 147 +#define SC_R_GPU_1_PID0 148 +#define SC_R_GPU_1_PID1 149 +#define SC_R_GPU_1_PID2 150 +#define SC_R_GPU_1_PID3 151 +#define SC_R_PCIE_A 152 +#define SC_R_SERDES_0 153 +#define SC_R_MATCH_0 154 +#define SC_R_MATCH_1 155 +#define SC_R_MATCH_2 156 +#define SC_R_MATCH_3 157 +#define SC_R_MATCH_4 158 +#define SC_R_MATCH_5 159 +#define SC_R_MATCH_6 160 +#define SC_R_MATCH_7 161 +#define SC_R_MATCH_8 162 +#define SC_R_MATCH_9 163 +#define SC_R_MATCH_10 164 +#define SC_R_MATCH_11 165 +#define SC_R_MATCH_12 166 +#define SC_R_MATCH_13 167 +#define SC_R_MATCH_14 168 +#define SC_R_PCIE_B 169 +#define SC_R_SATA_0 170 +#define SC_R_SERDES_1 171 +#define SC_R_HSIO_GPIO 172 +#define SC_R_MATCH_15 173 +#define SC_R_MATCH_16 174 +#define SC_R_MATCH_17 175 +#define SC_R_MATCH_18 176 +#define SC_R_MATCH_19 177 +#define SC_R_MATCH_20 178 +#define SC_R_MATCH_21 179 +#define SC_R_MATCH_22 180 +#define SC_R_MATCH_23 181 +#define SC_R_MATCH_24 182 +#define SC_R_MATCH_25 183 +#define SC_R_MATCH_26 184 +#define SC_R_MATCH_27 185 +#define SC_R_MATCH_28 186 +#define SC_R_LCD_0 187 +#define SC_R_LCD_0_PWM_0 188 +#define SC_R_LCD_0_I2C_0 189 +#define SC_R_LCD_0_I2C_1 190 +#define SC_R_PWM_0 191 +#define SC_R_PWM_1 192 +#define SC_R_PWM_2 193 +#define SC_R_PWM_3 194 +#define SC_R_PWM_4 195 +#define SC_R_PWM_5 196 +#define SC_R_PWM_6 197 +#define SC_R_PWM_7 198 +#define SC_R_GPIO_0 199 +#define SC_R_GPIO_1 200 +#define SC_R_GPIO_2 201 +#define SC_R_GPIO_3 202 +#define SC_R_GPIO_4 203 +#define SC_R_GPIO_5 204 +#define SC_R_GPIO_6 205 +#define SC_R_GPIO_7 206 +#define SC_R_GPT_0 207 +#define SC_R_GPT_1 208 +#define SC_R_GPT_2 209 +#define SC_R_GPT_3 210 +#define SC_R_GPT_4 211 +#define SC_R_KPP 212 +#define SC_R_MU_0A 213 +#define SC_R_MU_1A 214 +#define SC_R_MU_2A 215 +#define SC_R_MU_3A 216 +#define SC_R_MU_4A 217 +#define SC_R_MU_5A 218 +#define SC_R_MU_6A 219 +#define SC_R_MU_7A 220 +#define SC_R_MU_8A 221 +#define SC_R_MU_9A 222 +#define SC_R_MU_10A 223 +#define SC_R_MU_11A 224 +#define SC_R_MU_12A 225 +#define SC_R_MU_13A 226 +#define SC_R_MU_5B 227 +#define SC_R_MU_6B 228 +#define SC_R_MU_7B 229 +#define SC_R_MU_8B 230 +#define SC_R_MU_9B 231 +#define SC_R_MU_10B 232 +#define SC_R_MU_11B 233 +#define SC_R_MU_12B 234 +#define SC_R_MU_13B 235 +#define SC_R_ROM_0 236 +#define SC_R_FSPI_0 237 +#define SC_R_FSPI_1 238 +#define SC_R_IEE 239 +#define SC_R_IEE_R0 240 +#define SC_R_IEE_R1 241 +#define SC_R_IEE_R2 242 +#define SC_R_IEE_R3 243 +#define SC_R_IEE_R4 244 +#define SC_R_IEE_R5 245 +#define SC_R_IEE_R6 246 +#define SC_R_IEE_R7 247 +#define SC_R_SDHC_0 248 +#define SC_R_SDHC_1 249 +#define SC_R_SDHC_2 250 +#define SC_R_ENET_0 251 +#define SC_R_ENET_1 252 +#define SC_R_MLB_0 253 +#define SC_R_DMA_2_CH0 254 +#define SC_R_DMA_2_CH1 255 +#define SC_R_DMA_2_CH2 256 +#define SC_R_DMA_2_CH3 257 +#define SC_R_DMA_2_CH4 258 +#define SC_R_USB_0 259 +#define SC_R_USB_1 260 +#define SC_R_USB_0_PHY 261 +#define SC_R_USB_2 262 +#define SC_R_USB_2_PHY 263 +#define SC_R_DTCP 264 +#define SC_R_NAND 265 +#define SC_R_LVDS_0 266 +#define SC_R_LVDS_0_PWM_0 267 +#define SC_R_LVDS_0_I2C_0 268 +#define SC_R_LVDS_0_I2C_1 269 +#define SC_R_LVDS_1 270 +#define SC_R_LVDS_1_PWM_0 271 +#define SC_R_LVDS_1_I2C_0 272 +#define SC_R_LVDS_1_I2C_1 273 +#define SC_R_LVDS_2 274 +#define SC_R_LVDS_2_PWM_0 275 +#define SC_R_LVDS_2_I2C_0 276 +#define SC_R_LVDS_2_I2C_1 277 +#define SC_R_M4_0_PID0 278 +#define SC_R_M4_0_PID1 279 +#define SC_R_M4_0_PID2 280 +#define SC_R_M4_0_PID3 281 +#define SC_R_M4_0_PID4 282 +#define SC_R_M4_0_RGPIO 283 +#define SC_R_M4_0_SEMA42 284 +#define SC_R_M4_0_TPM 285 +#define SC_R_M4_0_PIT 286 +#define SC_R_M4_0_UART 287 +#define SC_R_M4_0_I2C 288 +#define SC_R_M4_0_INTMUX 289 +#define SC_R_M4_0_SIM 290 +#define SC_R_M4_0_WDOG 291 +#define SC_R_M4_0_MU_0B 292 +#define SC_R_M4_0_MU_0A0 293 +#define SC_R_M4_0_MU_0A1 294 +#define SC_R_M4_0_MU_0A2 295 +#define SC_R_M4_0_MU_0A3 296 +#define SC_R_M4_0_MU_1A 297 +#define SC_R_M4_1_PID0 298 +#define SC_R_M4_1_PID1 299 +#define SC_R_M4_1_PID2 300 +#define SC_R_M4_1_PID3 301 +#define SC_R_M4_1_PID4 302 +#define SC_R_M4_1_RGPIO 303 +#define SC_R_M4_1_SEMA42 304 +#define SC_R_M4_1_TPM 305 +#define SC_R_M4_1_PIT 306 +#define SC_R_M4_1_UART 307 +#define SC_R_M4_1_I2C 308 +#define SC_R_M4_1_INTMUX 309 +#define SC_R_M4_1_SIM 310 +#define SC_R_M4_1_WDOG 311 +#define SC_R_M4_1_MU_0B 312 +#define SC_R_M4_1_MU_0A0 313 +#define SC_R_M4_1_MU_0A1 314 +#define SC_R_M4_1_MU_0A2 315 +#define SC_R_M4_1_MU_0A3 316 +#define SC_R_M4_1_MU_1A 317 +#define SC_R_SAI_0 318 +#define SC_R_SAI_1 319 +#define SC_R_SAI_2 320 +#define SC_R_IRQSTR_SCU2 321 +#define SC_R_IRQSTR_DSP 322 +#define SC_R_UNUSED5 323 +#define SC_R_UNUSED6 324 +#define SC_R_AUDIO_PLL_0 325 +#define SC_R_PI_0 326 +#define SC_R_PI_0_PWM_0 327 +#define SC_R_PI_0_PWM_1 328 +#define SC_R_PI_0_I2C_0 329 +#define SC_R_PI_0_PLL 330 +#define SC_R_PI_1 331 +#define SC_R_PI_1_PWM_0 332 +#define SC_R_PI_1_PWM_1 333 +#define SC_R_PI_1_I2C_0 334 +#define SC_R_PI_1_PLL 335 +#define SC_R_SC_PID0 336 +#define SC_R_SC_PID1 337 +#define SC_R_SC_PID2 338 +#define SC_R_SC_PID3 339 +#define SC_R_SC_PID4 340 +#define SC_R_SC_SEMA42 341 +#define SC_R_SC_TPM 342 +#define SC_R_SC_PIT 343 +#define SC_R_SC_UART 344 +#define SC_R_SC_I2C 345 +#define SC_R_SC_MU_0B 346 +#define SC_R_SC_MU_0A0 347 +#define SC_R_SC_MU_0A1 348 +#define SC_R_SC_MU_0A2 349 +#define SC_R_SC_MU_0A3 350 +#define SC_R_SC_MU_1A 351 +#define SC_R_SYSCNT_RD 352 +#define SC_R_SYSCNT_CMP 353 +#define SC_R_DEBUG 354 +#define SC_R_SYSTEM 355 +#define SC_R_SNVS 356 +#define SC_R_OTP 357 +#define SC_R_VPU_PID0 358 +#define SC_R_VPU_PID1 359 +#define SC_R_VPU_PID2 360 +#define SC_R_VPU_PID3 361 +#define SC_R_VPU_PID4 362 +#define SC_R_VPU_PID5 363 +#define SC_R_VPU_PID6 364 +#define SC_R_VPU_PID7 365 +#define SC_R_VPU_UART 366 +#define SC_R_VPUCORE 367 +#define SC_R_VPUCORE_0 368 +#define SC_R_VPUCORE_1 369 +#define SC_R_VPUCORE_2 370 +#define SC_R_VPUCORE_3 371 +#define SC_R_DMA_4_CH0 372 +#define SC_R_DMA_4_CH1 373 +#define SC_R_DMA_4_CH2 374 +#define SC_R_DMA_4_CH3 375 +#define SC_R_DMA_4_CH4 376 +#define SC_R_ISI_CH0 377 +#define SC_R_ISI_CH1 378 +#define SC_R_ISI_CH2 379 +#define SC_R_ISI_CH3 380 +#define SC_R_ISI_CH4 381 +#define SC_R_ISI_CH5 382 +#define SC_R_ISI_CH6 383 +#define SC_R_ISI_CH7 384 +#define SC_R_MJPEG_DEC_S0 385 +#define SC_R_MJPEG_DEC_S1 386 +#define SC_R_MJPEG_DEC_S2 387 +#define SC_R_MJPEG_DEC_S3 388 +#define SC_R_MJPEG_ENC_S0 389 +#define SC_R_MJPEG_ENC_S1 390 +#define SC_R_MJPEG_ENC_S2 391 +#define SC_R_MJPEG_ENC_S3 392 +#define SC_R_MIPI_0 393 +#define SC_R_MIPI_0_PWM_0 394 +#define SC_R_MIPI_0_I2C_0 395 +#define SC_R_MIPI_0_I2C_1 396 +#define SC_R_MIPI_1 397 +#define SC_R_MIPI_1_PWM_0 398 +#define SC_R_MIPI_1_I2C_0 399 +#define SC_R_MIPI_1_I2C_1 400 +#define SC_R_CSI_0 401 +#define SC_R_CSI_0_PWM_0 402 +#define SC_R_CSI_0_I2C_0 403 +#define SC_R_CSI_1 404 +#define SC_R_CSI_1_PWM_0 405 +#define SC_R_CSI_1_I2C_0 406 +#define SC_R_HDMI 407 +#define SC_R_HDMI_I2S 408 +#define SC_R_HDMI_I2C_0 409 +#define SC_R_HDMI_PLL_0 410 +#define SC_R_HDMI_RX 411 +#define SC_R_HDMI_RX_BYPASS 412 +#define SC_R_HDMI_RX_I2C_0 413 +#define SC_R_ASRC_0 414 +#define SC_R_ESAI_0 415 +#define SC_R_SPDIF_0 416 +#define SC_R_SPDIF_1 417 +#define SC_R_SAI_3 418 +#define SC_R_SAI_4 419 +#define SC_R_SAI_5 420 +#define SC_R_GPT_5 421 +#define SC_R_GPT_6 422 +#define SC_R_GPT_7 423 +#define SC_R_GPT_8 424 +#define SC_R_GPT_9 425 +#define SC_R_GPT_10 426 +#define SC_R_DMA_2_CH5 427 +#define SC_R_DMA_2_CH6 428 +#define SC_R_DMA_2_CH7 429 +#define SC_R_DMA_2_CH8 430 +#define SC_R_DMA_2_CH9 431 +#define SC_R_DMA_2_CH10 432 +#define SC_R_DMA_2_CH11 433 +#define SC_R_DMA_2_CH12 434 +#define SC_R_DMA_2_CH13 435 +#define SC_R_DMA_2_CH14 436 +#define SC_R_DMA_2_CH15 437 +#define SC_R_DMA_2_CH16 438 +#define SC_R_DMA_2_CH17 439 +#define SC_R_DMA_2_CH18 440 +#define SC_R_DMA_2_CH19 441 +#define SC_R_DMA_2_CH20 442 +#define SC_R_DMA_2_CH21 443 +#define SC_R_DMA_2_CH22 444 +#define SC_R_DMA_2_CH23 445 +#define SC_R_DMA_2_CH24 446 +#define SC_R_DMA_2_CH25 447 +#define SC_R_DMA_2_CH26 448 +#define SC_R_DMA_2_CH27 449 +#define SC_R_DMA_2_CH28 450 +#define SC_R_DMA_2_CH29 451 +#define SC_R_DMA_2_CH30 452 +#define SC_R_DMA_2_CH31 453 +#define SC_R_ASRC_1 454 +#define SC_R_ESAI_1 455 +#define SC_R_SAI_6 456 +#define SC_R_SAI_7 457 +#define SC_R_AMIX 458 +#define SC_R_MQS_0 459 +#define SC_R_DMA_3_CH0 460 +#define SC_R_DMA_3_CH1 461 +#define SC_R_DMA_3_CH2 462 +#define SC_R_DMA_3_CH3 463 +#define SC_R_DMA_3_CH4 464 +#define SC_R_DMA_3_CH5 465 +#define SC_R_DMA_3_CH6 466 +#define SC_R_DMA_3_CH7 467 +#define SC_R_DMA_3_CH8 468 +#define SC_R_DMA_3_CH9 469 +#define SC_R_DMA_3_CH10 470 +#define SC_R_DMA_3_CH11 471 +#define SC_R_DMA_3_CH12 472 +#define SC_R_DMA_3_CH13 473 +#define SC_R_DMA_3_CH14 474 +#define SC_R_DMA_3_CH15 475 +#define SC_R_DMA_3_CH16 476 +#define SC_R_DMA_3_CH17 477 +#define SC_R_DMA_3_CH18 478 +#define SC_R_DMA_3_CH19 479 +#define SC_R_DMA_3_CH20 480 +#define SC_R_DMA_3_CH21 481 +#define SC_R_DMA_3_CH22 482 +#define SC_R_DMA_3_CH23 483 +#define SC_R_DMA_3_CH24 484 +#define SC_R_DMA_3_CH25 485 +#define SC_R_DMA_3_CH26 486 +#define SC_R_DMA_3_CH27 487 +#define SC_R_DMA_3_CH28 488 +#define SC_R_DMA_3_CH29 489 +#define SC_R_DMA_3_CH30 490 +#define SC_R_DMA_3_CH31 491 +#define SC_R_AUDIO_PLL_1 492 +#define SC_R_AUDIO_CLK_0 493 +#define SC_R_AUDIO_CLK_1 494 +#define SC_R_MCLK_OUT_0 495 +#define SC_R_MCLK_OUT_1 496 +#define SC_R_PMIC_0 497 +#define SC_R_PMIC_1 498 +#define SC_R_SECO 499 +#define SC_R_CAAM_JR1 500 +#define SC_R_CAAM_JR2 501 +#define SC_R_CAAM_JR3 502 +#define SC_R_SECO_MU_2 503 +#define SC_R_SECO_MU_3 504 +#define SC_R_SECO_MU_4 505 +#define SC_R_HDMI_RX_PWM_0 506 +#define SC_R_A35 507 +#define SC_R_A35_0 508 +#define SC_R_A35_1 509 +#define SC_R_A35_2 510 +#define SC_R_A35_3 511 +#define SC_R_DSP 512 +#define SC_R_DSP_RAM 513 +#define SC_R_CAAM_JR1_OUT 514 +#define SC_R_CAAM_JR2_OUT 515 +#define SC_R_CAAM_JR3_OUT 516 +#define SC_R_VPU_DEC_0 517 +#define SC_R_VPU_ENC_0 518 +#define SC_R_CAAM_JR0 519 +#define SC_R_CAAM_JR0_OUT 520 +#define SC_R_PMIC_2 521 +#define SC_R_DBLOGIC 522 +#define SC_R_HDMI_PLL_1 523 +#define SC_R_BOARD_R0 524 +#define SC_R_BOARD_R1 525 +#define SC_R_BOARD_R2 526 +#define SC_R_BOARD_R3 527 +#define SC_R_BOARD_R4 528 +#define SC_R_BOARD_R5 529 +#define SC_R_BOARD_R6 530 +#define SC_R_BOARD_R7 531 +#define SC_R_MJPEG_DEC_MP 532 +#define SC_R_MJPEG_ENC_MP 533 +#define SC_R_VPU_TS_0 534 +#define SC_R_VPU_MU_0 535 +#define SC_R_VPU_MU_1 536 +#define SC_R_VPU_MU_2 537 +#define SC_R_VPU_MU_3 538 +#define SC_R_VPU_ENC_1 539 +#define SC_R_VPU 540 +#define SC_R_LAST 541 + +#endif /* __DT_BINDINGS_RSCRC_IMX_H */ -- 2.7.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 3/5] arm64: dts: imx: add imx8qxp support 2018-04-27 19:06 ` [PATCH 3/5] arm64: dts: imx: add imx8qxp support Dong Aisheng @ 2018-04-30 5:54 ` Mark Rutland 2018-04-30 8:50 ` A.s. Dong 2018-05-01 15:55 ` Rob Herring 1 sibling, 1 reply; 6+ messages in thread From: Mark Rutland @ 2018-04-30 5:54 UTC (permalink / raw) To: Dong Aisheng Cc: devicetree, dongas86, catalin.marinas, will.deacon, robh+dt, linux-imx, kernel, fabio.estevam, shawnguo, linux-arm-kernel Hi, On Sat, Apr 28, 2018 at 03:06:15AM +0800, Dong Aisheng wrote: > +/{ > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + /* We have 1 clusters having 4 Cortex-A35 cores */ > + }; > + > + pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <GIC_PPI 7 > + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; > + interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, <&A35_3>; > + }; If using a PPI and all cores are identical, interrupt-affinity isn't necessary. I note you're using GICv3, whihch doesn't encode a cpumask in its PPI specifier. All instances of GIC_CPU_MASK_SIMPLE should go from dts{i,} files for this platform. > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + cpu_suspend = <0xc4000001>; > + cpu_off = <0xc4000002>; > + cpu_on = <0xc4000003>; You can drop the cpu_* function IDs if you only have "arm,psci-1.0" in the compatible list. These IDs (and more) are implied by PSCI 1.0+. > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > new file mode 100644 > index 0000000..920018e > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > @@ -0,0 +1,138 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2017~2018 NXP > + */ > + > +/dts-v1/; > + > +#include "fsl-imx8qxp.dtsi" > + > +/ { > + model = "Freescale i.MX8QXP MEK"; > + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; > + > + chosen { > + stdout-path = &dma_lpuart0; > + }; No baud-rate configuration? [...] > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > new file mode 100644 > index 0000000..d7cc836 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > @@ -0,0 +1,794 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Copyright 2017~2018 NXP > + * Dong Aisheng <aisheng.dong@nxp.com> > + */ > + > +#include <dt-bindings/clock/imx8qxp-clock.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pinctrl/pads-imx8qxp.h> > +#include <dt-bindings/power/imx-rsrc.h> > + > +#include "fsl-imx8-ca35.dtsi" > + > +/ { > + compatible = "fsl,imx8qxp"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + serial0 = &dma_lpuart0; > + mmc0 = &usdhc1; > + mmc1 = &usdhc2; > + mmc2 = &usdhc3; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x00000000 0x80000000 0 0x40000000>; > + }; > + > + gic: interrupt-controller@51a00000 { > + compatible = "arm,gic-v3"; > + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ > + <0x0 0x51b00000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ > + #interrupt-cells = <3>; > + interrupt-controller; > + interrupts = <GIC_PPI 9 > + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; As above, GIC_CPU_MASK_SIMPLE does not apply to GICv3, and should go. > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ ... likewise. > + clock-frequency = <8000000>; Your firmware should be configuring CNTFRQ, so this clock-frequency property should go. Thanks, Mark. ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH 3/5] arm64: dts: imx: add imx8qxp support 2018-04-30 5:54 ` Mark Rutland @ 2018-04-30 8:50 ` A.s. Dong 0 siblings, 0 replies; 6+ messages in thread From: A.s. Dong @ 2018-04-30 8:50 UTC (permalink / raw) To: Mark Rutland Cc: devicetree@vger.kernel.org, dongas86@gmail.com, catalin.marinas@arm.com, will.deacon@arm.com, robh+dt@kernel.org, dl-linux-imx, kernel@pengutronix.de, Fabio Estevam, shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org Hi Mark, Thanks for the review. > -----Original Message----- > From: Mark Rutland [mailto:mark.rutland@arm.com] > Sent: Monday, April 30, 2018 1:55 PM > To: A.s. Dong <aisheng.dong@nxp.com> > Cc: linux-arm-kernel@lists.infradead.org; dongas86@gmail.com; > kernel@pengutronix.de; shawnguo@kernel.org; Fabio Estevam > <fabio.estevam@nxp.com>; robh+dt@kernel.org; catalin.marinas@arm.com; > will.deacon@arm.com; dl-linux-imx <linux-imx@nxp.com>; > devicetree@vger.kernel.org > Subject: Re: [PATCH 3/5] arm64: dts: imx: add imx8qxp support > > Hi, > > On Sat, Apr 28, 2018 at 03:06:15AM +0800, Dong Aisheng wrote: > > +/{ > > + cpus { > > + #address-cells = <2>; > > + #size-cells = <0>; > > + > > + /* We have 1 clusters having 4 Cortex-A35 cores */ > > > + }; > > + > > + pmu { > > + compatible = "arm,armv8-pmuv3"; > > + interrupts = <GIC_PPI 7 > > + (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_HIGH)>; > > + interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, > <&A35_3>; > > + }; > > If using a PPI and all cores are identical, interrupt-affinity isn't necessary. > > I note you're using GICv3, whihch doesn't encode a cpumask in its PPI > specifier. All instances of GIC_CPU_MASK_SIMPLE should go from dts{i,} files > for this platform. > You're right. Thanks for the reminder. > > + > > + psci { > > + compatible = "arm,psci-1.0"; > > + method = "smc"; > > + cpu_suspend = <0xc4000001>; > > + cpu_off = <0xc4000002>; > > + cpu_on = <0xc4000003>; > > You can drop the cpu_* function IDs if you only have "arm,psci-1.0" in the > compatible list. These IDs (and more) are implied by PSCI 1.0+. > That's true. Will remove them. > > + }; > > +}; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > > b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > > new file mode 100644 > > index 0000000..920018e > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > > @@ -0,0 +1,138 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2017~2018 NXP > > + */ > > + > > +/dts-v1/; > > + > > +#include "fsl-imx8qxp.dtsi" > > + > > +/ { > > + model = "Freescale i.MX8QXP MEK"; > > + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; > > + > > + chosen { > > + stdout-path = &dma_lpuart0; > > + }; > > No baud-rate configuration? > We use the default one configured by bootloader. Or should I be better to specify it? > [...] > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > > new file mode 100644 > > index 0000000..d7cc836 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > > @@ -0,0 +1,794 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * Copyright 2017~2018 NXP > > + * Dong Aisheng <aisheng.dong@nxp.com> > > + */ > > + > > +#include <dt-bindings/clock/imx8qxp-clock.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/pinctrl/pads-imx8qxp.h> > > +#include <dt-bindings/power/imx-rsrc.h> > > + > > +#include "fsl-imx8-ca35.dtsi" > > + > > +/ { > > + compatible = "fsl,imx8qxp"; > > + interrupt-parent = <&gic>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + aliases { > > + serial0 = &dma_lpuart0; > > + mmc0 = &usdhc1; > > + mmc1 = &usdhc2; > > + mmc2 = &usdhc3; > > + }; > > + > > + memory@80000000 { > > + device_type = "memory"; > > + reg = <0x00000000 0x80000000 0 0x40000000>; > > + }; > > + > > + gic: interrupt-controller@51a00000 { > > + compatible = "arm,gic-v3"; > > + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ > > + <0x0 0x51b00000 0 0xC0000>; /* GICR (RD_base + > SGI_base) */ > > + #interrupt-cells = <3>; > > + interrupt-controller; > > + interrupts = <GIC_PPI 9 > > + (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_HIGH)>; > > As above, GIC_CPU_MASK_SIMPLE does not apply to GICv3, and should go. > > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ > > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ > > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ > > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>; > > +/* Hypervisor */ > > ... likewise. > > > + clock-frequency = <8000000>; > > Your firmware should be configuring CNTFRQ, so this clock-frequency > property should go. > Correct. Will delete it. Regards Dong Aisheng > Thanks, > Mark. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 3/5] arm64: dts: imx: add imx8qxp support 2018-04-27 19:06 ` [PATCH 3/5] arm64: dts: imx: add imx8qxp support Dong Aisheng 2018-04-30 5:54 ` Mark Rutland @ 2018-05-01 15:55 ` Rob Herring 2018-05-02 18:00 ` A.s. Dong 1 sibling, 1 reply; 6+ messages in thread From: Rob Herring @ 2018-05-01 15:55 UTC (permalink / raw) To: Dong Aisheng Cc: Mark Rutland, devicetree, dongas86, catalin.marinas, will.deacon, linux-imx, kernel, fabio.estevam, shawnguo, linux-arm-kernel On Sat, Apr 28, 2018 at 03:06:15AM +0800, Dong Aisheng wrote: > Add imx8qxp support > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: devicetree@vger.kernel.org > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: Fabio Estevam <fabio.estevam@nxp.com> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > --- > Documentation/devicetree/bindings/arm/fsl.txt | 5 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi | 66 ++ > arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts | 138 ++++ > arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi | 794 ++++++++++++++++++++++ > include/dt-bindings/power/imx-rsrc.h | 558 +++++++++++++++ > 6 files changed, 1562 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > create mode 100644 include/dt-bindings/power/imx-rsrc.h > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt > index cdb9dd7..e9aea78 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.txt > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > @@ -53,6 +53,11 @@ i.MX6 Quad SABRE Automotive Board > Required root node properties: > - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; > > +i.MX8QXP MEK Board > +Required root node properties: > + - compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; > + > + > Generic i.MX boards > ------------------- > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 86e18ad..2622da7 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb > +dtb-$(CONFIG_SOC_IMX8QXP) += fsl-imx8qxp-mek.dtb > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi b/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi > new file mode 100644 > index 0000000..3a3569f > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi > @@ -0,0 +1,66 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Copyright 2017~2018 NXP > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/{ > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + /* We have 1 clusters having 4 Cortex-A35 cores */ > + A35_0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + next-level-cache = <&A35_L2>; > + }; > + > + A35_1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x1>; > + enable-method = "psci"; > + next-level-cache = <&A35_L2>; > + }; > + > + A35_2: cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x2>; > + enable-method = "psci"; > + next-level-cache = <&A35_L2>; > + }; > + > + A35_3: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x3>; > + enable-method = "psci"; > + next-level-cache = <&A35_L2>; > + }; > + > + A35_L2: l2-cache0 { > + compatible = "cache"; > + }; > + }; > + > + pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <GIC_PPI 7 > + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; > + interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, <&A35_3>; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + cpu_suspend = <0xc4000001>; > + cpu_off = <0xc4000002>; > + cpu_on = <0xc4000003>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > new file mode 100644 > index 0000000..920018e > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > @@ -0,0 +1,138 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2017~2018 NXP > + */ > + > +/dts-v1/; > + > +#include "fsl-imx8qxp.dtsi" > + > +/ { > + model = "Freescale i.MX8QXP MEK"; > + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; > + > + chosen { > + stdout-path = &dma_lpuart0; > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; Remove this container node. It is not a simple-bus. > + > + reg_usdhc2_vmmc: usdhc2_vmmc { > + compatible = "regulator-fixed"; > + regulator-name = "SD1_SPWR"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + }; > +}; > + > +&dma_lpuart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lpuart0>; > + status = "okay"; > +}; > + > +&fec1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec1>; > + phy-mode = "rgmii-id"; > + phy-handle = <ðphy0>; > + fsl,magic-packet; > + status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy0: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + at803x,eee-disabled; > + at803x,vddio-1p8v; > + reg = <0>; > + }; > + > + ethphy1: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + at803x,eee-disabled; > + at803x,vddio-1p8v; > + reg = <1>; > + }; > + }; > +}; > + > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + non-removable; > + vmmc-supply = <®_usdhc2_vmmc>; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_fec1: fec1grp { > + fsl,pins = < > + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 > + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 > + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 > + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 > + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 > + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 > + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 > + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 > + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 > + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 > + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 > + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 > + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 > + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 > + >; > + }; > + pinctrl_lpuart0: lpuart0grp { > + fsl,pins = < > + SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 > + SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 > + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 > + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 > + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 > + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 > + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 > + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 > + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 > + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 > + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 > + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 > + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 > + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 > + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 > + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 > + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 > + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 > + >; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > new file mode 100644 > index 0000000..d7cc836 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > @@ -0,0 +1,794 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Copyright 2017~2018 NXP > + * Dong Aisheng <aisheng.dong@nxp.com> > + */ > + > +#include <dt-bindings/clock/imx8qxp-clock.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pinctrl/pads-imx8qxp.h> > +#include <dt-bindings/power/imx-rsrc.h> > + > +#include "fsl-imx8-ca35.dtsi" > + > +/ { > + compatible = "fsl,imx8qxp"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + serial0 = &dma_lpuart0; > + mmc0 = &usdhc1; > + mmc1 = &usdhc2; > + mmc2 = &usdhc3; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x00000000 0x80000000 0 0x40000000>; > + }; > + > + gic: interrupt-controller@51a00000 { > + compatible = "arm,gic-v3"; > + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ > + <0x0 0x51b00000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ > + #interrupt-cells = <3>; > + interrupt-controller; > + interrupts = <GIC_PPI 9 > + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ > + clock-frequency = <8000000>; > + }; > + > + scu { > + compatible = "nxp,imx8qxp-scu", "simple-bus"; This is not a simple-bus. > + fsl,mu = <&lsio_mu0>; > + > + clk: clk { > + compatible = "fsl,imx8qxp-clk"; > + #clock-cells = <1>; > + }; > + > + iomuxc: iomuxc { > + compatible = "fsl,imx8qxp-iomuxc"; > + }; > + > + imx8qx-pm { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_lsio: PD_LSIO { Lower case and don't use '_' in node names. Build the dtb with W=12 and fix the warnings. > + compatible = "nxp,imx8qxp-pd"; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_lsio_pwm0: lsio_pwm0@SC_R_PWM_0 { Don't use defines in unit-addresses. > + reg = <SC_R_PWM_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_pwm1: lsio_pwm1@SC_R_PWM_1 { > + reg = <SC_R_PWM_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_pwm2: lsio_pwm2@SC_R_PWM_2 { > + reg = <SC_R_PWM_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_pwm3: lsio_pwm3@SC_R_PWM_3 { > + reg = <SC_R_PWM_3>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_pwm4: lsio_pwm4@SC_R_PWM_4 { > + reg = <SC_R_PWM_4>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_pwm5: lsio_pwm5@SC_R_PWM_5 { > + reg = <SC_R_PWM_5>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_pwm6: lsio_pwm6@SC_R_PWM_6 { > + reg = <SC_R_PWM_6>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_pwm7: lsio_pwm7@SC_R_PWM_7 { > + reg = <SC_R_PWM_7>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_kpp: lsio_kpp@SC_R_KPP { > + reg = <SC_R_KPP>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpio0: lsio_gpio0@SC_R_GPIO_0 { > + reg = <SC_R_GPIO_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpio1: lsio_gpio1@SC_R_GPIO_1 { > + reg = <SC_R_GPIO_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpio2: lsio_gpio2@SC_R_GPIO_2 { > + reg = <SC_R_GPIO_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpio3: lsio_gpio3@SC_R_GPIO_3 { > + reg = <SC_R_GPIO_3>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpio4: lsio_gpio4@SC_R_GPIO_4 { > + reg = <SC_R_GPIO_4>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpio5: lsio_gpio5@SC_R_GPIO_5 { > + reg = <SC_R_GPIO_5>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpio6: lsio_gpio6@SC_R_GPIO_6 { > + reg = <SC_R_GPIO_6>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpio7: lsio_gpio7@SC_R_GPIO_7 { > + reg = <SC_R_GPIO_7>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpt0: lsio_gpt0@SC_R_GPT_0 { > + reg = <SC_R_GPT_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpt1: lsio_gpt1@SC_R_GPT_1 { > + reg = <SC_R_GPT_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpt2: lsio_gpt2@SC_R_GPT_2 { > + reg = <SC_R_GPT_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpt3: lsio_gpt3@SC_R_GPT_3 { > + reg = <SC_R_GPT_3>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_gpt4: lsio_gpt4@SC_R_GPT_4 { > + reg = <SC_R_GPT_4>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_flexspi0: lsio_fspi0@SC_R_FSPI_0 { > + reg = <SC_R_FSPI_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + pd_lsio_flexspi1: lsio_fspi1@SC_R_FSPI_1 { > + reg = <SC_R_FSPI_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_lsio>; > + }; > + }; > + > + pd_conn: connectivity_power_domain { > + compatible = "nxp,imx8qxp-pd"; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_conn_usbotg0: conn_usb0@SC_R_USB_0 { > + reg = <SC_R_USB_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_usbotg0_phy: conn_usb0_phy@SC_R_USB_0_PHY { > + reg = <SC_R_USB_0_PHY>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_usbotg1: conn_usb1@SC_R_USB_1 { > + reg = <SC_R_USB_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_usb2: conn_usb2@SC_R_USB_2 { > + reg = <SC_R_USB_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_usb2_phy: conn_usb2_phy@SC_R_USB_2_PHY { > + reg = <SC_R_USB_2_PHY>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_sdhc0: conn_sdhc0@SC_R_SDHC_0 { > + reg = <SC_R_SDHC_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_sdhc1: conn_sdhc1@SC_R_SDHC_1 { > + reg = <SC_R_SDHC_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_sdhc2: conn_sdhc2@SC_R_SDHC_2 { > + reg = <SC_R_SDHC_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_enet0: conn_enet0@SC_R_ENET_0 { > + reg = <SC_R_ENET_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_enet1: conn_enet1@SC_R_ENET_1 { > + reg = <SC_R_ENET_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_nand: conn_nand@SC_R_NAND { > + reg = <SC_R_NAND>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_mlb0: conn_mlb0@SC_R_MLB_0 { > + reg = <SC_R_MLB_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_conn>; > + }; > + pd_conn_edma_ch0: conn_dma4_ch0@SC_R_DMA_4_CH0 { > + reg = <SC_R_DMA_4_CH0>; > + #power-domain-cells = <0>; > + power-domains =<&pd_conn>; > + }; > + pd_conn_edma_ch1: conn_dma4_ch1@SC_R_DMA_4_CH1 { > + reg = <SC_R_DMA_4_CH1>; > + #power-domain-cells = <0>; > + power-domains =<&pd_conn>; > + }; > + pd_conn_edma_ch2: conn_dma4_ch2@SC_R_DMA_4_CH2 { > + reg = <SC_R_DMA_4_CH2>; > + #power-domain-cells = <0>; > + power-domains =<&pd_conn>; > + }; > + pd_conn_edma_ch3: conn_dma4_ch3@SC_R_DMA_4_CH3 { > + reg = <SC_R_DMA_4_CH3>; > + #power-domain-cells = <0>; > + power-domains =<&pd_conn>; > + }; > + pd_conn_edma_ch4: conn_dma4_ch4@SC_R_DMA_4_CH4 { > + reg = <SC_R_DMA_4_CH4>; > + #power-domain-cells = <0>; > + power-domains =<&pd_conn>; > + }; > + }; > + > + pd_dma: dma_power_domain { > + compatible = "nxp,imx8qxp-pd"; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_dma_flexcan0: dma_flexcan0@SC_R_CAN_0 { > + reg = <SC_R_CAN_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_flexcan1: dma_flexcan1@SC_R_CAN_1 { > + reg = <SC_R_CAN_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_flexcan2: dma_flexcan2@SC_R_CAN_2 { > + reg = <SC_R_CAN_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_ftm0: dma_ftm0@SC_R_FTM_0 { > + reg = <SC_R_FTM_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_ftm1: dma_ftm1@SC_R_FTM_1 { > + reg = <SC_R_FTM_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_adc0: dma_adc0@SC_R_ADC_0 { > + reg = <SC_R_ADC_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpi2c0: dma_lpi2c0@SC_R_I2C_0 { > + reg = <SC_R_I2C_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpi2c1: dma_lpi2c1@SC_R_I2C_1 { > + reg = <SC_R_I2C_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpi2c2: dma_lpi2c2@SC_R_I2C_2 { > + reg = <SC_R_I2C_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpi2c3: dma_lpi2c3@SC_R_I2C_3 { > + reg = <SC_R_I2C_3>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpuart0: dma_lpuart0@SC_R_UART_0 { > + reg = <SC_R_UART_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpuart1: dma_lpuart1@SC_R_UART_1 { > + reg = <SC_R_UART_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpuart2: dma_lpuart2@SC_R_UART_2 { > + reg = <SC_R_UART_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpuart3: dma_lpuart3@SC_R_UART_3 { > + reg = <SC_R_UART_3>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpspi0: dma_spi0@SC_R_SPI_0 { > + reg = <SC_R_SPI_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpspi1: dma_spi1@SC_R_SPI_1 { > + reg = <SC_R_SPI_1>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpspi2: dma_spi2@SC_R_SPI_2 { > + reg = <SC_R_SPI_2>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lpspi3: dma_spi3@SC_R_SPI_3 { > + reg = <SC_R_SPI_3>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_pwm0: dma_pwm0@SC_R_LCD_0_PWM_0 { > + reg = <SC_R_LCD_0_PWM_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + pd_dma_lcd0: dma_lcd0@SC_R_LCD_0 { > + reg = <SC_R_LCD_0>; > + #power-domain-cells = <0>; > + power-domains = <&pd_dma>; > + }; > + }; > + > + pd_gpu: gpu-power-domain { > + compatible = "nxp,imx8qxp-pd"; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_gpu0: gpu0@SC_R_GPU_0_PID0 { > + reg = <SC_R_GPU_0_PID0>; > + #power-domain-cells = <0>; > + power-domains =<&pd_gpu>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > + > + pd_vpu: vpu-power-domain@SC_R_VPU_PID0 { > + compatible = "nxp,imx8qxp-pd"; > + reg = <SC_R_VPU_PID0>; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_vpu_core: vpu_core@SC_R_VPUCORE { > + reg = <SC_R_VPUCORE>; > + #power-domain-cells = <0>; > + power-domains =<&pd_vpu>; > + }; > + }; > + > + pd_hsio: hsio-power-domain { > + compatible = "nxp,imx8qxp-pd"; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_pcie: hsio-pcie-pd@SC_R_PCIE_A { > + reg = <SC_R_PCIE_A>; > + #power-domain-cells = <0>; > + power-domains =<&pd_hsio>; > + }; > + }; > + > + pd_dc: dc-power-domain { > + compatible = "nxp,imx8qxp-pd"; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_dc0: dc0-power-domain@SC_R_DC_0 { > + reg = <SC_R_DC_0>; > + #power-domain-cells = <0>; > + power-domains =<&pd_dc>; > + }; > + }; > + > + pd_mipi_dsi: mipi0_dsi_power_domain@SC_R_MIPI_0 { > + compatible = "nxp,imx8qxp-pd"; > + reg = <SC_R_MIPI_0>; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_mipi_dsi_i2c0: mipi0_dsi_i2c0@SC_R_MIPI_0_I2C_0 { > + reg = <SC_R_MIPI_0_I2C_0>; > + power-domains =<&pd_mipi_dsi>; > + }; > + pd_mipi_dsi_i2c1: mipi0_dsi_i2c1@SC_R_MIPI_0_I2C_1 { > + reg = <SC_R_MIPI_0_I2C_1>; > + power-domains =<&pd_mipi_dsi>; > + }; > + pd_mipi_pwm0: mipi0_dsi_pwm0@SC_R_MIPI_0_PWM_0 { > + reg = <SC_R_MIPI_0_PWM_0>; > + power-domains =<&pd_mipi_dsi>; > + }; > + }; > + > + pd_mipi_csi: mipi_csi0_power_domain@SC_R_CSI_0 { > + compatible = "nxp,imx8qxp-pd"; > + reg = <SC_R_CSI_0>; > + #power-domain-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pd_mipi_csi0_i2c0: mipi_csi0_i2c@SC_R_CSI_0_I2C_0 { > + reg = <SC_R_CSI_0_I2C_0>; > + power-domains =<&pd_mipi_csi>; > + }; > + pd_mipi_csi0_pwm0: mipi_csi0_pwm@SC_R_CSI_0_PWM_0 { > + reg = <SC_R_CSI_0_PWM_0>; > + power-domains =<&pd_mipi_csi>; > + }; > + }; > + }; > + }; > + > + gpu: gpu@53100000 { > + compatible = "fsl,imx8qxp-gpu", "fsl,imx8x-gpu"; Documented? > + reg = <0x0 0x53100000 0 0x40000>, > + <0x0 0x80000000 0x0 0x08000000>, > + <0x0 0x0 0x0 0x2000000>; > + reg-names = "iobase_3d_0", "phys_baseaddr", > + "contiguous_mem"; Putting your RAM base address in here is not okay. And contiguous_mem looks suspicious too. > + interrupts = <0 64 0x4>; > + interrupt-names = "irq_3d_0"; > + clocks = <&clk IMX8QXP_GPU0_CORE_CLK>, > + <&clk IMX8QXP_GPU0_SHADER_CLK>; > + clock-names = "clk_core_3d_0", "clk_shader_3d_0"; > + assigned-clocks = <&clk IMX8QXP_GPU0_CORE_CLK>, > + <&clk IMX8QXP_GPU0_SHADER_CLK>; > + assigned-clock-rates = <650000000>, <700000000>; > + status = "disabled"; > + }; > + > + audio_subsys: audio@59000000 { bus@... if this is just a simple-bus. > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + reg = <0x0 0x59000000 0x0 0x1000000>; > + ranges; > + }; > + > + dma_subsys: dma@5a000000 { bus@... > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; Really need 64-bits of size? > + reg = <0x0 0x5a000000 0x0 0x1000000>; If you have registers for the bus, then it is not a simple-bus (or at least should have a more specific compatible in addition). > + ranges; A non-empty ranges is preferred to limit the address space of the bus. > + > + dma_lpuart0: serial@5a060000 { > + compatible = "fsl,imx7ulp-lpuart"; > + reg = <0x0 0x5a060000 0x0 0x1000>; > + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gic>; > + clocks = <&clk IMX8QXP_UART0_CLK>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + dma_i2c0: i2c@5a800000 { > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; > + reg = <0x0 0x5a800000 0x0 0x4000>; > + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gic>; > + clocks = <&clk IMX8QXP_I2C0_CLK>; > + clock-names = "per"; > + assigned-clocks = <&clk IMX8QXP_I2C0_CLK>; > + assigned-clock-rates = <24000000>; > + power-domains = <&pd_dma_lpi2c0>; What does the power-domain control exactly? An I2C controller isn't big enough to have power gates and you already have clocks defined here, so what else is there? > + status = "disabled"; > + }; > + > + dma_i2c1: i2c@5a810000 { > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; > + reg = <0x0 0x5a810000 0x0 0x4000>; > + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gic>; > + clocks = <&clk IMX8QXP_I2C1_CLK>; > + clock-names = "per"; > + assigned-clocks = <&clk IMX8QXP_I2C1_CLK>; > + assigned-clock-rates = <24000000>; > + status = "disabled"; > + }; > + > + dma_i2c2: i2c@5a820000 { > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; > + reg = <0x0 0x5a820000 0x0 0x4000>; > + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gic>; > + clocks = <&clk IMX8QXP_I2C2_CLK>; > + clock-names = "per"; > + assigned-clocks = <&clk IMX8QXP_I2C2_CLK>; > + assigned-clock-rates = <24000000>; > + power-domains = <&pd_dma_lpi2c2>; > + status = "disabled"; > + }; > + > + dma_i2c3: i2c@5a830000 { > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; > + reg = <0x0 0x5a830000 0x0 0x4000>; > + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gic>; > + clocks = <&clk IMX8QXP_I2C3_CLK>; > + clock-names = "per"; > + assigned-clocks = <&clk IMX8QXP_I2C3_CLK>; > + assigned-clock-rates = <24000000>; > + power-domains = <&pd_dma_lpi2c3>; > + status = "disabled"; > + }; > + }; > + > + conn_subsys: conn@5b000000 { bus@... > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + reg = <0x0 0x5b000000 0x0 0x1000000>; > + ranges; Same comments here. > + > + usdhc1: usdhc@5b010000 { mmc@... > + compatible = "fsl,imx7d-usdhc"; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0 0x5b010000 0x0 0x10000>; Really have 64KB of registers? > + clocks = <&clk IMX8QXP_SDHC0_IPG_CLK>, > + <&clk IMX8QXP_SDHC0_CLK>, > + <&clk IMX8QXP_CLK_DUMMY>; > + clock-names = "ipg", "per", "ahb"; > + assigned-clocks = <&clk IMX8QXP_SDHC0_DIV>; > + assigned-clock-rates = <200000000>; > + power-domains = <&pd_conn_sdhc0>; > + status = "disabled"; > + }; > + > + usdhc2: usdhc@5b020000 { > + compatible = "fsl,imx7d-usdhc"; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0 0x5b020000 0x0 0x10000>; > + clocks = <&clk IMX8QXP_SDHC1_IPG_CLK>, > + <&clk IMX8QXP_SDHC1_CLK>, > + <&clk IMX8QXP_CLK_DUMMY>; > + clock-names = "ipg", "per", "ahb"; > + assigned-clocks = <&clk IMX8QXP_SDHC1_DIV>; > + assigned-clock-rates = <200000000>; > + power-domains = <&pd_conn_sdhc1>; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + status = "disabled"; > + }; > + > + usdhc3: usdhc@5b030000 { > + compatible = "fsl,imx7d-usdhc"; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0 0x5b030000 0x0 0x10000>; > + clocks = <&clk IMX8QXP_SDHC2_IPG_CLK>, > + <&clk IMX8QXP_SDHC2_CLK>, > + <&clk IMX8QXP_CLK_DUMMY>; > + clock-names = "ipg", "per", "ahb"; > + assigned-clocks = <&clk IMX8QXP_SDHC2_DIV>; > + assigned-clock-rates = <200000000>; > + power-domains = <&pd_conn_sdhc2>; > + status = "disabled"; > + }; > + > + fec1: ethernet@5b040000 { > + compatible = "fsl,imx6sx-fec"; > + reg = <0x0 0x5b040000 0x0 0x10000>; > + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8QXP_ENET0_IPG_CLK>, <&clk IMX8QXP_ENET0_AHB_CLK>, <&clk IMX8QXP_ENET0_TX_CLK>, > + <&clk IMX8QXP_ENET0_PTP_CLK>; > + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; > + assigned-clocks = <&clk IMX8QXP_ENET0_REF_DIV>, <&clk IMX8QXP_ENET0_PTP_CLK>; > + assigned-clock-rates = <125000000>, <125000000>; > + fsl,num-tx-queues=<3>; > + fsl,num-rx-queues=<3>; > + power-domains = <&pd_conn_enet0>; > + status = "disabled"; > + }; > + > + fec2: ethernet@5b050000 { > + compatible = "fsl,imx8qxp-fec"; > + reg = <0x0 0x5b050000 0x0 0x10000>; > + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8QXP_ENET1_IPG_CLK>, <&clk IMX8QXP_ENET1_AHB_CLK>, <&clk IMX8QXP_ENET1_TX_CLK>, > + <&clk IMX8QXP_ENET1_PTP_CLK>; > + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; > + assigned-clocks = <&clk IMX8QXP_ENET1_REF_DIV>, <&clk IMX8QXP_ENET1_PTP_CLK>; > + assigned-clock-rates = <125000000>, <125000000>; > + fsl,num-tx-queues=<3>; > + fsl,num-rx-queues=<3>; > + power-domains = <&pd_conn_enet1>; > + status = "disabled"; > + }; > + }; > + > + db_subsys: db@5c000000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + reg = <0x0 0x5c000000 0x0 0x1000000>; > + ranges; > + > + ddr_pmu0: ddr_pmu@5c020000 { > + compatible = "fsl,imx8-ddr-pmu"; > + reg = <0x0 0x5c020000 0x0 0x10000>; > + }; > + }; > + > + lsio_subsys: lsio@5d000000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + reg = <0x0 0x5d000000 0x0 0x1000000>; > + ranges; > + > + lsio_mu0: mu@5d1b0000 { > + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; > + reg = <0x0 0x5d1b0000 0x0 0x10000>; > + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + lsio_gpio0: gpio@5d080000 { > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > + reg = <0x0 0x5d080000 0x0 0x10000>; > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + lsio_gpio1: gpio@5d090000 { > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > + reg = <0x0 0x5d090000 0x0 0x10000>; > + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + lsio_gpio2: gpio@5d0a0000 { > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > + reg = <0x0 0x5d0a0000 0x0 0x10000>; > + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + lsio_gpio3: gpio@5d0b0000 { > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > + reg = <0x0 0x5d0b0000 0x0 0x10000>; > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + lsio_gpio4: gpio@5d0c0000 { > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > + reg = <0x0 0x5d0c0000 0x0 0x10000>; > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + lsio_gpio5: gpio@5d0d0000 { > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > + reg = <0x0 0x5d0d0000 0x0 0x10000>; > + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + lsio_gpio6: gpio@5d0e0000 { > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > + reg = <0x0 0x5d0e0000 0x0 0x10000>; > + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + lsio_gpio7: gpio@5d0f0000 { > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > + reg = <0x0 0x5d0f0000 0x0 0x10000>; > + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + > + hsio_subsys: hsio@5f000000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + reg = <0x0 0x5f000000 0x0 0x1000000>; > + ranges; > + }; > + > +}; > diff --git a/include/dt-bindings/power/imx-rsrc.h b/include/dt-bindings/power/imx-rsrc.h > new file mode 100644 > index 0000000..b4d0980 > --- /dev/null > +++ b/include/dt-bindings/power/imx-rsrc.h > @@ -0,0 +1,558 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Copyright 2017~2018 NXP > + */ > + > +#ifndef __DT_BINDINGS_RSCRC_IMX_H > +#define __DT_BINDINGS_RSCRC_IMX_H > + > +/* > + * These defines are used to indicate a resource. Resources include peripherals > + * and bus masters (but not memory regions). Note items from list should > + * never be changed or removed (only added to at the end of the list). > + */ > +#define SC_R_A53 0 > +#define SC_R_A53_0 1 > +#define SC_R_A53_1 2 > +#define SC_R_A53_2 3 > +#define SC_R_A53_3 4 > +#define SC_R_A72 5 > +#define SC_R_A72_0 6 > +#define SC_R_A72_1 7 > +#define SC_R_A72_2 8 > +#define SC_R_A72_3 9 > +#define SC_R_CCI 10 > +#define SC_R_DB 11 > +#define SC_R_DRC_0 12 > +#define SC_R_DRC_1 13 > +#define SC_R_GIC_SMMU 14 > +#define SC_R_IRQSTR_M4_0 15 > +#define SC_R_IRQSTR_M4_1 16 > +#define SC_R_SMMU 17 > +#define SC_R_GIC 18 > +#define SC_R_DC_0_BLIT0 19 > +#define SC_R_DC_0_BLIT1 20 > +#define SC_R_DC_0_BLIT2 21 > +#define SC_R_DC_0_BLIT_OUT 22 > +#define SC_R_DC_0_CAPTURE0 23 > +#define SC_R_DC_0_CAPTURE1 24 > +#define SC_R_DC_0_WARP 25 > +#define SC_R_DC_0_INTEGRAL0 26 > +#define SC_R_DC_0_INTEGRAL1 27 > +#define SC_R_DC_0_VIDEO0 28 > +#define SC_R_DC_0_VIDEO1 29 > +#define SC_R_DC_0_FRAC0 30 > +#define SC_R_DC_0_FRAC1 31 > +#define SC_R_DC_0 32 > +#define SC_R_GPU_2_PID0 33 > +#define SC_R_DC_0_PLL_0 34 > +#define SC_R_DC_0_PLL_1 35 > +#define SC_R_DC_1_BLIT0 36 > +#define SC_R_DC_1_BLIT1 37 > +#define SC_R_DC_1_BLIT2 38 > +#define SC_R_DC_1_BLIT_OUT 39 > +#define SC_R_DC_1_CAPTURE0 40 > +#define SC_R_DC_1_CAPTURE1 41 > +#define SC_R_DC_1_WARP 42 > +#define SC_R_DC_1_INTEGRAL0 43 > +#define SC_R_DC_1_INTEGRAL1 44 > +#define SC_R_DC_1_VIDEO0 45 > +#define SC_R_DC_1_VIDEO1 46 > +#define SC_R_DC_1_FRAC0 47 > +#define SC_R_DC_1_FRAC1 48 > +#define SC_R_DC_1 49 > +#define SC_R_GPU_3_PID0 50 > +#define SC_R_DC_1_PLL_0 51 > +#define SC_R_DC_1_PLL_1 52 > +#define SC_R_SPI_0 53 > +#define SC_R_SPI_1 54 > +#define SC_R_SPI_2 55 > +#define SC_R_SPI_3 56 > +#define SC_R_UART_0 57 > +#define SC_R_UART_1 58 > +#define SC_R_UART_2 59 > +#define SC_R_UART_3 60 > +#define SC_R_UART_4 61 > +#define SC_R_EMVSIM_0 62 > +#define SC_R_EMVSIM_1 63 > +#define SC_R_DMA_0_CH0 64 > +#define SC_R_DMA_0_CH1 65 > +#define SC_R_DMA_0_CH2 66 > +#define SC_R_DMA_0_CH3 67 > +#define SC_R_DMA_0_CH4 68 > +#define SC_R_DMA_0_CH5 69 > +#define SC_R_DMA_0_CH6 70 > +#define SC_R_DMA_0_CH7 71 > +#define SC_R_DMA_0_CH8 72 > +#define SC_R_DMA_0_CH9 73 > +#define SC_R_DMA_0_CH10 74 > +#define SC_R_DMA_0_CH11 75 > +#define SC_R_DMA_0_CH12 76 > +#define SC_R_DMA_0_CH13 77 > +#define SC_R_DMA_0_CH14 78 > +#define SC_R_DMA_0_CH15 79 > +#define SC_R_DMA_0_CH16 80 > +#define SC_R_DMA_0_CH17 81 > +#define SC_R_DMA_0_CH18 82 > +#define SC_R_DMA_0_CH19 83 > +#define SC_R_DMA_0_CH20 84 > +#define SC_R_DMA_0_CH21 85 > +#define SC_R_DMA_0_CH22 86 > +#define SC_R_DMA_0_CH23 87 > +#define SC_R_DMA_0_CH24 88 > +#define SC_R_DMA_0_CH25 89 > +#define SC_R_DMA_0_CH26 90 > +#define SC_R_DMA_0_CH27 91 > +#define SC_R_DMA_0_CH28 92 > +#define SC_R_DMA_0_CH29 93 > +#define SC_R_DMA_0_CH30 94 > +#define SC_R_DMA_0_CH31 95 > +#define SC_R_I2C_0 96 > +#define SC_R_I2C_1 97 > +#define SC_R_I2C_2 98 > +#define SC_R_I2C_3 99 > +#define SC_R_I2C_4 100 > +#define SC_R_ADC_0 101 > +#define SC_R_ADC_1 102 > +#define SC_R_FTM_0 103 > +#define SC_R_FTM_1 104 > +#define SC_R_CAN_0 105 > +#define SC_R_CAN_1 106 > +#define SC_R_CAN_2 107 > +#define SC_R_DMA_1_CH0 108 > +#define SC_R_DMA_1_CH1 109 > +#define SC_R_DMA_1_CH2 110 > +#define SC_R_DMA_1_CH3 111 > +#define SC_R_DMA_1_CH4 112 > +#define SC_R_DMA_1_CH5 113 > +#define SC_R_DMA_1_CH6 114 > +#define SC_R_DMA_1_CH7 115 > +#define SC_R_DMA_1_CH8 116 > +#define SC_R_DMA_1_CH9 117 > +#define SC_R_DMA_1_CH10 118 > +#define SC_R_DMA_1_CH11 119 > +#define SC_R_DMA_1_CH12 120 > +#define SC_R_DMA_1_CH13 121 > +#define SC_R_DMA_1_CH14 122 > +#define SC_R_DMA_1_CH15 123 > +#define SC_R_DMA_1_CH16 124 > +#define SC_R_DMA_1_CH17 125 > +#define SC_R_DMA_1_CH18 126 > +#define SC_R_DMA_1_CH19 127 > +#define SC_R_DMA_1_CH20 128 > +#define SC_R_DMA_1_CH21 129 > +#define SC_R_DMA_1_CH22 130 > +#define SC_R_DMA_1_CH23 131 > +#define SC_R_DMA_1_CH24 132 > +#define SC_R_DMA_1_CH25 133 > +#define SC_R_DMA_1_CH26 134 > +#define SC_R_DMA_1_CH27 135 > +#define SC_R_DMA_1_CH28 136 > +#define SC_R_DMA_1_CH29 137 > +#define SC_R_DMA_1_CH30 138 > +#define SC_R_DMA_1_CH31 139 > +#define SC_R_UNUSED1 140 > +#define SC_R_UNUSED2 141 > +#define SC_R_UNUSED3 142 > +#define SC_R_UNUSED4 143 > +#define SC_R_GPU_0_PID0 144 > +#define SC_R_GPU_0_PID1 145 > +#define SC_R_GPU_0_PID2 146 > +#define SC_R_GPU_0_PID3 147 > +#define SC_R_GPU_1_PID0 148 > +#define SC_R_GPU_1_PID1 149 > +#define SC_R_GPU_1_PID2 150 > +#define SC_R_GPU_1_PID3 151 > +#define SC_R_PCIE_A 152 > +#define SC_R_SERDES_0 153 > +#define SC_R_MATCH_0 154 > +#define SC_R_MATCH_1 155 > +#define SC_R_MATCH_2 156 > +#define SC_R_MATCH_3 157 > +#define SC_R_MATCH_4 158 > +#define SC_R_MATCH_5 159 > +#define SC_R_MATCH_6 160 > +#define SC_R_MATCH_7 161 > +#define SC_R_MATCH_8 162 > +#define SC_R_MATCH_9 163 > +#define SC_R_MATCH_10 164 > +#define SC_R_MATCH_11 165 > +#define SC_R_MATCH_12 166 > +#define SC_R_MATCH_13 167 > +#define SC_R_MATCH_14 168 > +#define SC_R_PCIE_B 169 > +#define SC_R_SATA_0 170 > +#define SC_R_SERDES_1 171 > +#define SC_R_HSIO_GPIO 172 > +#define SC_R_MATCH_15 173 > +#define SC_R_MATCH_16 174 > +#define SC_R_MATCH_17 175 > +#define SC_R_MATCH_18 176 > +#define SC_R_MATCH_19 177 > +#define SC_R_MATCH_20 178 > +#define SC_R_MATCH_21 179 > +#define SC_R_MATCH_22 180 > +#define SC_R_MATCH_23 181 > +#define SC_R_MATCH_24 182 > +#define SC_R_MATCH_25 183 > +#define SC_R_MATCH_26 184 > +#define SC_R_MATCH_27 185 > +#define SC_R_MATCH_28 186 > +#define SC_R_LCD_0 187 > +#define SC_R_LCD_0_PWM_0 188 > +#define SC_R_LCD_0_I2C_0 189 > +#define SC_R_LCD_0_I2C_1 190 > +#define SC_R_PWM_0 191 > +#define SC_R_PWM_1 192 > +#define SC_R_PWM_2 193 > +#define SC_R_PWM_3 194 > +#define SC_R_PWM_4 195 > +#define SC_R_PWM_5 196 > +#define SC_R_PWM_6 197 > +#define SC_R_PWM_7 198 > +#define SC_R_GPIO_0 199 > +#define SC_R_GPIO_1 200 > +#define SC_R_GPIO_2 201 > +#define SC_R_GPIO_3 202 > +#define SC_R_GPIO_4 203 > +#define SC_R_GPIO_5 204 > +#define SC_R_GPIO_6 205 > +#define SC_R_GPIO_7 206 > +#define SC_R_GPT_0 207 > +#define SC_R_GPT_1 208 > +#define SC_R_GPT_2 209 > +#define SC_R_GPT_3 210 > +#define SC_R_GPT_4 211 > +#define SC_R_KPP 212 > +#define SC_R_MU_0A 213 > +#define SC_R_MU_1A 214 > +#define SC_R_MU_2A 215 > +#define SC_R_MU_3A 216 > +#define SC_R_MU_4A 217 > +#define SC_R_MU_5A 218 > +#define SC_R_MU_6A 219 > +#define SC_R_MU_7A 220 > +#define SC_R_MU_8A 221 > +#define SC_R_MU_9A 222 > +#define SC_R_MU_10A 223 > +#define SC_R_MU_11A 224 > +#define SC_R_MU_12A 225 > +#define SC_R_MU_13A 226 > +#define SC_R_MU_5B 227 > +#define SC_R_MU_6B 228 > +#define SC_R_MU_7B 229 > +#define SC_R_MU_8B 230 > +#define SC_R_MU_9B 231 > +#define SC_R_MU_10B 232 > +#define SC_R_MU_11B 233 > +#define SC_R_MU_12B 234 > +#define SC_R_MU_13B 235 > +#define SC_R_ROM_0 236 > +#define SC_R_FSPI_0 237 > +#define SC_R_FSPI_1 238 > +#define SC_R_IEE 239 > +#define SC_R_IEE_R0 240 > +#define SC_R_IEE_R1 241 > +#define SC_R_IEE_R2 242 > +#define SC_R_IEE_R3 243 > +#define SC_R_IEE_R4 244 > +#define SC_R_IEE_R5 245 > +#define SC_R_IEE_R6 246 > +#define SC_R_IEE_R7 247 > +#define SC_R_SDHC_0 248 > +#define SC_R_SDHC_1 249 > +#define SC_R_SDHC_2 250 > +#define SC_R_ENET_0 251 > +#define SC_R_ENET_1 252 > +#define SC_R_MLB_0 253 > +#define SC_R_DMA_2_CH0 254 > +#define SC_R_DMA_2_CH1 255 > +#define SC_R_DMA_2_CH2 256 > +#define SC_R_DMA_2_CH3 257 > +#define SC_R_DMA_2_CH4 258 > +#define SC_R_USB_0 259 > +#define SC_R_USB_1 260 > +#define SC_R_USB_0_PHY 261 > +#define SC_R_USB_2 262 > +#define SC_R_USB_2_PHY 263 > +#define SC_R_DTCP 264 > +#define SC_R_NAND 265 > +#define SC_R_LVDS_0 266 > +#define SC_R_LVDS_0_PWM_0 267 > +#define SC_R_LVDS_0_I2C_0 268 > +#define SC_R_LVDS_0_I2C_1 269 > +#define SC_R_LVDS_1 270 > +#define SC_R_LVDS_1_PWM_0 271 > +#define SC_R_LVDS_1_I2C_0 272 > +#define SC_R_LVDS_1_I2C_1 273 > +#define SC_R_LVDS_2 274 > +#define SC_R_LVDS_2_PWM_0 275 > +#define SC_R_LVDS_2_I2C_0 276 > +#define SC_R_LVDS_2_I2C_1 277 > +#define SC_R_M4_0_PID0 278 > +#define SC_R_M4_0_PID1 279 > +#define SC_R_M4_0_PID2 280 > +#define SC_R_M4_0_PID3 281 > +#define SC_R_M4_0_PID4 282 > +#define SC_R_M4_0_RGPIO 283 > +#define SC_R_M4_0_SEMA42 284 > +#define SC_R_M4_0_TPM 285 > +#define SC_R_M4_0_PIT 286 > +#define SC_R_M4_0_UART 287 > +#define SC_R_M4_0_I2C 288 > +#define SC_R_M4_0_INTMUX 289 > +#define SC_R_M4_0_SIM 290 > +#define SC_R_M4_0_WDOG 291 > +#define SC_R_M4_0_MU_0B 292 > +#define SC_R_M4_0_MU_0A0 293 > +#define SC_R_M4_0_MU_0A1 294 > +#define SC_R_M4_0_MU_0A2 295 > +#define SC_R_M4_0_MU_0A3 296 > +#define SC_R_M4_0_MU_1A 297 > +#define SC_R_M4_1_PID0 298 > +#define SC_R_M4_1_PID1 299 > +#define SC_R_M4_1_PID2 300 > +#define SC_R_M4_1_PID3 301 > +#define SC_R_M4_1_PID4 302 > +#define SC_R_M4_1_RGPIO 303 > +#define SC_R_M4_1_SEMA42 304 > +#define SC_R_M4_1_TPM 305 > +#define SC_R_M4_1_PIT 306 > +#define SC_R_M4_1_UART 307 > +#define SC_R_M4_1_I2C 308 > +#define SC_R_M4_1_INTMUX 309 > +#define SC_R_M4_1_SIM 310 > +#define SC_R_M4_1_WDOG 311 > +#define SC_R_M4_1_MU_0B 312 > +#define SC_R_M4_1_MU_0A0 313 > +#define SC_R_M4_1_MU_0A1 314 > +#define SC_R_M4_1_MU_0A2 315 > +#define SC_R_M4_1_MU_0A3 316 > +#define SC_R_M4_1_MU_1A 317 > +#define SC_R_SAI_0 318 > +#define SC_R_SAI_1 319 > +#define SC_R_SAI_2 320 > +#define SC_R_IRQSTR_SCU2 321 > +#define SC_R_IRQSTR_DSP 322 > +#define SC_R_UNUSED5 323 > +#define SC_R_UNUSED6 324 > +#define SC_R_AUDIO_PLL_0 325 > +#define SC_R_PI_0 326 > +#define SC_R_PI_0_PWM_0 327 > +#define SC_R_PI_0_PWM_1 328 > +#define SC_R_PI_0_I2C_0 329 > +#define SC_R_PI_0_PLL 330 > +#define SC_R_PI_1 331 > +#define SC_R_PI_1_PWM_0 332 > +#define SC_R_PI_1_PWM_1 333 > +#define SC_R_PI_1_I2C_0 334 > +#define SC_R_PI_1_PLL 335 > +#define SC_R_SC_PID0 336 > +#define SC_R_SC_PID1 337 > +#define SC_R_SC_PID2 338 > +#define SC_R_SC_PID3 339 > +#define SC_R_SC_PID4 340 > +#define SC_R_SC_SEMA42 341 > +#define SC_R_SC_TPM 342 > +#define SC_R_SC_PIT 343 > +#define SC_R_SC_UART 344 > +#define SC_R_SC_I2C 345 > +#define SC_R_SC_MU_0B 346 > +#define SC_R_SC_MU_0A0 347 > +#define SC_R_SC_MU_0A1 348 > +#define SC_R_SC_MU_0A2 349 > +#define SC_R_SC_MU_0A3 350 > +#define SC_R_SC_MU_1A 351 > +#define SC_R_SYSCNT_RD 352 > +#define SC_R_SYSCNT_CMP 353 > +#define SC_R_DEBUG 354 > +#define SC_R_SYSTEM 355 > +#define SC_R_SNVS 356 > +#define SC_R_OTP 357 > +#define SC_R_VPU_PID0 358 > +#define SC_R_VPU_PID1 359 > +#define SC_R_VPU_PID2 360 > +#define SC_R_VPU_PID3 361 > +#define SC_R_VPU_PID4 362 > +#define SC_R_VPU_PID5 363 > +#define SC_R_VPU_PID6 364 > +#define SC_R_VPU_PID7 365 > +#define SC_R_VPU_UART 366 > +#define SC_R_VPUCORE 367 > +#define SC_R_VPUCORE_0 368 > +#define SC_R_VPUCORE_1 369 > +#define SC_R_VPUCORE_2 370 > +#define SC_R_VPUCORE_3 371 > +#define SC_R_DMA_4_CH0 372 > +#define SC_R_DMA_4_CH1 373 > +#define SC_R_DMA_4_CH2 374 > +#define SC_R_DMA_4_CH3 375 > +#define SC_R_DMA_4_CH4 376 > +#define SC_R_ISI_CH0 377 > +#define SC_R_ISI_CH1 378 > +#define SC_R_ISI_CH2 379 > +#define SC_R_ISI_CH3 380 > +#define SC_R_ISI_CH4 381 > +#define SC_R_ISI_CH5 382 > +#define SC_R_ISI_CH6 383 > +#define SC_R_ISI_CH7 384 > +#define SC_R_MJPEG_DEC_S0 385 > +#define SC_R_MJPEG_DEC_S1 386 > +#define SC_R_MJPEG_DEC_S2 387 > +#define SC_R_MJPEG_DEC_S3 388 > +#define SC_R_MJPEG_ENC_S0 389 > +#define SC_R_MJPEG_ENC_S1 390 > +#define SC_R_MJPEG_ENC_S2 391 > +#define SC_R_MJPEG_ENC_S3 392 > +#define SC_R_MIPI_0 393 > +#define SC_R_MIPI_0_PWM_0 394 > +#define SC_R_MIPI_0_I2C_0 395 > +#define SC_R_MIPI_0_I2C_1 396 > +#define SC_R_MIPI_1 397 > +#define SC_R_MIPI_1_PWM_0 398 > +#define SC_R_MIPI_1_I2C_0 399 > +#define SC_R_MIPI_1_I2C_1 400 > +#define SC_R_CSI_0 401 > +#define SC_R_CSI_0_PWM_0 402 > +#define SC_R_CSI_0_I2C_0 403 > +#define SC_R_CSI_1 404 > +#define SC_R_CSI_1_PWM_0 405 > +#define SC_R_CSI_1_I2C_0 406 > +#define SC_R_HDMI 407 > +#define SC_R_HDMI_I2S 408 > +#define SC_R_HDMI_I2C_0 409 > +#define SC_R_HDMI_PLL_0 410 > +#define SC_R_HDMI_RX 411 > +#define SC_R_HDMI_RX_BYPASS 412 > +#define SC_R_HDMI_RX_I2C_0 413 > +#define SC_R_ASRC_0 414 > +#define SC_R_ESAI_0 415 > +#define SC_R_SPDIF_0 416 > +#define SC_R_SPDIF_1 417 > +#define SC_R_SAI_3 418 > +#define SC_R_SAI_4 419 > +#define SC_R_SAI_5 420 > +#define SC_R_GPT_5 421 > +#define SC_R_GPT_6 422 > +#define SC_R_GPT_7 423 > +#define SC_R_GPT_8 424 > +#define SC_R_GPT_9 425 > +#define SC_R_GPT_10 426 > +#define SC_R_DMA_2_CH5 427 > +#define SC_R_DMA_2_CH6 428 > +#define SC_R_DMA_2_CH7 429 > +#define SC_R_DMA_2_CH8 430 > +#define SC_R_DMA_2_CH9 431 > +#define SC_R_DMA_2_CH10 432 > +#define SC_R_DMA_2_CH11 433 > +#define SC_R_DMA_2_CH12 434 > +#define SC_R_DMA_2_CH13 435 > +#define SC_R_DMA_2_CH14 436 > +#define SC_R_DMA_2_CH15 437 > +#define SC_R_DMA_2_CH16 438 > +#define SC_R_DMA_2_CH17 439 > +#define SC_R_DMA_2_CH18 440 > +#define SC_R_DMA_2_CH19 441 > +#define SC_R_DMA_2_CH20 442 > +#define SC_R_DMA_2_CH21 443 > +#define SC_R_DMA_2_CH22 444 > +#define SC_R_DMA_2_CH23 445 > +#define SC_R_DMA_2_CH24 446 > +#define SC_R_DMA_2_CH25 447 > +#define SC_R_DMA_2_CH26 448 > +#define SC_R_DMA_2_CH27 449 > +#define SC_R_DMA_2_CH28 450 > +#define SC_R_DMA_2_CH29 451 > +#define SC_R_DMA_2_CH30 452 > +#define SC_R_DMA_2_CH31 453 > +#define SC_R_ASRC_1 454 > +#define SC_R_ESAI_1 455 > +#define SC_R_SAI_6 456 > +#define SC_R_SAI_7 457 > +#define SC_R_AMIX 458 > +#define SC_R_MQS_0 459 > +#define SC_R_DMA_3_CH0 460 > +#define SC_R_DMA_3_CH1 461 > +#define SC_R_DMA_3_CH2 462 > +#define SC_R_DMA_3_CH3 463 > +#define SC_R_DMA_3_CH4 464 > +#define SC_R_DMA_3_CH5 465 > +#define SC_R_DMA_3_CH6 466 > +#define SC_R_DMA_3_CH7 467 > +#define SC_R_DMA_3_CH8 468 > +#define SC_R_DMA_3_CH9 469 > +#define SC_R_DMA_3_CH10 470 > +#define SC_R_DMA_3_CH11 471 > +#define SC_R_DMA_3_CH12 472 > +#define SC_R_DMA_3_CH13 473 > +#define SC_R_DMA_3_CH14 474 > +#define SC_R_DMA_3_CH15 475 > +#define SC_R_DMA_3_CH16 476 > +#define SC_R_DMA_3_CH17 477 > +#define SC_R_DMA_3_CH18 478 > +#define SC_R_DMA_3_CH19 479 > +#define SC_R_DMA_3_CH20 480 > +#define SC_R_DMA_3_CH21 481 > +#define SC_R_DMA_3_CH22 482 > +#define SC_R_DMA_3_CH23 483 > +#define SC_R_DMA_3_CH24 484 > +#define SC_R_DMA_3_CH25 485 > +#define SC_R_DMA_3_CH26 486 > +#define SC_R_DMA_3_CH27 487 > +#define SC_R_DMA_3_CH28 488 > +#define SC_R_DMA_3_CH29 489 > +#define SC_R_DMA_3_CH30 490 > +#define SC_R_DMA_3_CH31 491 > +#define SC_R_AUDIO_PLL_1 492 > +#define SC_R_AUDIO_CLK_0 493 > +#define SC_R_AUDIO_CLK_1 494 > +#define SC_R_MCLK_OUT_0 495 > +#define SC_R_MCLK_OUT_1 496 > +#define SC_R_PMIC_0 497 > +#define SC_R_PMIC_1 498 > +#define SC_R_SECO 499 > +#define SC_R_CAAM_JR1 500 > +#define SC_R_CAAM_JR2 501 > +#define SC_R_CAAM_JR3 502 > +#define SC_R_SECO_MU_2 503 > +#define SC_R_SECO_MU_3 504 > +#define SC_R_SECO_MU_4 505 > +#define SC_R_HDMI_RX_PWM_0 506 > +#define SC_R_A35 507 > +#define SC_R_A35_0 508 > +#define SC_R_A35_1 509 > +#define SC_R_A35_2 510 > +#define SC_R_A35_3 511 > +#define SC_R_DSP 512 > +#define SC_R_DSP_RAM 513 > +#define SC_R_CAAM_JR1_OUT 514 > +#define SC_R_CAAM_JR2_OUT 515 > +#define SC_R_CAAM_JR3_OUT 516 > +#define SC_R_VPU_DEC_0 517 > +#define SC_R_VPU_ENC_0 518 > +#define SC_R_CAAM_JR0 519 > +#define SC_R_CAAM_JR0_OUT 520 > +#define SC_R_PMIC_2 521 > +#define SC_R_DBLOGIC 522 > +#define SC_R_HDMI_PLL_1 523 > +#define SC_R_BOARD_R0 524 > +#define SC_R_BOARD_R1 525 > +#define SC_R_BOARD_R2 526 > +#define SC_R_BOARD_R3 527 > +#define SC_R_BOARD_R4 528 > +#define SC_R_BOARD_R5 529 > +#define SC_R_BOARD_R6 530 > +#define SC_R_BOARD_R7 531 > +#define SC_R_MJPEG_DEC_MP 532 > +#define SC_R_MJPEG_ENC_MP 533 > +#define SC_R_VPU_TS_0 534 > +#define SC_R_VPU_MU_0 535 > +#define SC_R_VPU_MU_1 536 > +#define SC_R_VPU_MU_2 537 > +#define SC_R_VPU_MU_3 538 > +#define SC_R_VPU_ENC_1 539 > +#define SC_R_VPU 540 > +#define SC_R_LAST 541 > + > +#endif /* __DT_BINDINGS_RSCRC_IMX_H */ > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH 3/5] arm64: dts: imx: add imx8qxp support 2018-05-01 15:55 ` Rob Herring @ 2018-05-02 18:00 ` A.s. Dong 2018-05-02 20:50 ` Rob Herring 0 siblings, 1 reply; 6+ messages in thread From: A.s. Dong @ 2018-05-02 18:00 UTC (permalink / raw) To: Rob Herring Cc: Mark Rutland, devicetree@vger.kernel.org, dongas86@gmail.com, catalin.marinas@arm.com, will.deacon@arm.com, dl-linux-imx, kernel@pengutronix.de, Fabio Estevam, shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org > -----Original Message----- > From: Rob Herring [mailto:robh@kernel.org] > Sent: Tuesday, May 1, 2018 11:55 PM > To: A.s. Dong <aisheng.dong@nxp.com> > Cc: linux-arm-kernel@lists.infradead.org; dongas86@gmail.com; > kernel@pengutronix.de; shawnguo@kernel.org; Fabio Estevam > <fabio.estevam@nxp.com>; catalin.marinas@arm.com; > will.deacon@arm.com; dl-linux-imx <linux-imx@nxp.com>; Mark Rutland > <mark.rutland@arm.com>; devicetree@vger.kernel.org > Subject: Re: [PATCH 3/5] arm64: dts: imx: add imx8qxp support > > On Sat, Apr 28, 2018 at 03:06:15AM +0800, Dong Aisheng wrote: > > Add imx8qxp support > > > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Mark Rutland <mark.rutland@arm.com> > > Cc: devicetree@vger.kernel.org > > Cc: Shawn Guo <shawnguo@kernel.org> > > Cc: Sascha Hauer <kernel@pengutronix.de> > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > --- > > Documentation/devicetree/bindings/arm/fsl.txt | 5 + > > arch/arm64/boot/dts/freescale/Makefile | 1 + > > arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi | 66 ++ > > arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts | 138 ++++ > > arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi | 794 > ++++++++++++++++++++++ > > include/dt-bindings/power/imx-rsrc.h | 558 +++++++++++++++ > > 6 files changed, 1562 insertions(+) > > create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi > > create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > > create mode 100644 arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > > create mode 100644 include/dt-bindings/power/imx-rsrc.h > > > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt > b/Documentation/devicetree/bindings/arm/fsl.txt > > index cdb9dd7..e9aea78 100644 > > --- a/Documentation/devicetree/bindings/arm/fsl.txt > > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > > @@ -53,6 +53,11 @@ i.MX6 Quad SABRE Automotive Board > > Required root node properties: > > - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; > > > > +i.MX8QXP MEK Board > > +Required root node properties: > > + - compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; > > + > > + > > Generic i.MX boards > > ------------------- > > > > diff --git a/arch/arm64/boot/dts/freescale/Makefile > b/arch/arm64/boot/dts/freescale/Makefile > > index 86e18ad..2622da7 100644 > > --- a/arch/arm64/boot/dts/freescale/Makefile > > +++ b/arch/arm64/boot/dts/freescale/Makefile > > @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a- > rdb.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb > > +dtb-$(CONFIG_SOC_IMX8QXP) += fsl-imx8qxp-mek.dtb > > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi > b/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi > > new file mode 100644 > > index 0000000..3a3569f > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8-ca35.dtsi > > @@ -0,0 +1,66 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * Copyright 2017~2018 NXP > > + */ > > + > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > +/{ > > + cpus { > > + #address-cells = <2>; > > + #size-cells = <0>; > > + > > + /* We have 1 clusters having 4 Cortex-A35 cores */ > > + A35_0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a35"; > > + reg = <0x0 0x0>; > > + enable-method = "psci"; > > + next-level-cache = <&A35_L2>; > > + }; > > + > > + A35_1: cpu@1 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a35"; > > + reg = <0x0 0x1>; > > + enable-method = "psci"; > > + next-level-cache = <&A35_L2>; > > + }; > > + > > + A35_2: cpu@2 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a35"; > > + reg = <0x0 0x2>; > > + enable-method = "psci"; > > + next-level-cache = <&A35_L2>; > > + }; > > + > > + A35_3: cpu@3 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a35"; > > + reg = <0x0 0x3>; > > + enable-method = "psci"; > > + next-level-cache = <&A35_L2>; > > + }; > > + > > + A35_L2: l2-cache0 { > > + compatible = "cache"; > > + }; > > + }; > > + > > + pmu { > > + compatible = "arm,armv8-pmuv3"; > > + interrupts = <GIC_PPI 7 > > + (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_HIGH)>; > > + interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, > <&A35_3>; > > + }; > > + > > + psci { > > + compatible = "arm,psci-1.0"; > > + method = "smc"; > > + cpu_suspend = <0xc4000001>; > > + cpu_off = <0xc4000002>; > > + cpu_on = <0xc4000003>; > > + }; > > +}; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > > new file mode 100644 > > index 0000000..920018e > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek.dts > > @@ -0,0 +1,138 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2017~2018 NXP > > + */ > > + > > +/dts-v1/; > > + > > +#include "fsl-imx8qxp.dtsi" > > + > > +/ { > > + model = "Freescale i.MX8QXP MEK"; > > + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; > > + > > + chosen { > > + stdout-path = &dma_lpuart0; > > + }; > > + > > + regulators { > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > Remove this container node. It is not a simple-bus. > Got it > > + > > + reg_usdhc2_vmmc: usdhc2_vmmc { > > + compatible = "regulator-fixed"; > > + regulator-name = "SD1_SPWR"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3000000>; > > + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + }; > > + > > + }; > > +}; > > + > > +&dma_lpuart0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_lpuart0>; > > + status = "okay"; > > +}; > > + > > +&fec1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_fec1>; > > + phy-mode = "rgmii-id"; > > + phy-handle = <ðphy0>; > > + fsl,magic-packet; > > + status = "okay"; > > + > > + mdio { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + ethphy0: ethernet-phy@0 { > > + compatible = "ethernet-phy-ieee802.3-c22"; > > + at803x,eee-disabled; > > + at803x,vddio-1p8v; > > + reg = <0>; > > + }; > > + > > + ethphy1: ethernet-phy@1 { > > + compatible = "ethernet-phy-ieee802.3-c22"; > > + at803x,eee-disabled; > > + at803x,vddio-1p8v; > > + reg = <1>; > > + }; > > + }; > > +}; > > + > > +&usdhc1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usdhc1>; > > + bus-width = <8>; > > + non-removable; > > + status = "okay"; > > +}; > > + > > +&usdhc2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usdhc2>; > > + non-removable; > > + vmmc-supply = <®_usdhc2_vmmc>; > > + status = "okay"; > > +}; > > + > > +&iomuxc { > > + pinctrl_fec1: fec1grp { > > + fsl,pins = < > > + SC_P_ENET0_MDC_CONN_ENET0_MDC > 0x06000020 > > + SC_P_ENET0_MDIO_CONN_ENET0_MDIO > 0x06000020 > > + > SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL > 0x06000020 > > + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC > 0x06000020 > > + > SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 > 0x06000020 > > + > SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 > 0x06000020 > > + > SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 > 0x06000020 > > + > SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 > 0x06000020 > > + > SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 > > + > SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL > 0x06000020 > > + > SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 > 0x06000020 > > + > SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 > 0x06000020 > > + > SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 > 0x06000020 > > + > SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 > 0x06000020 > > + >; > > + }; > > + pinctrl_lpuart0: lpuart0grp { > > + fsl,pins = < > > + SC_P_UART0_RX_ADMA_UART0_RX > 0x06000020 > > + SC_P_UART0_TX_ADMA_UART0_TX > 0x06000020 > > + >; > > + }; > > + > > + pinctrl_usdhc1: usdhc1grp { > > + fsl,pins = < > > + SC_P_EMMC0_CLK_CONN_EMMC0_CLK > 0x06000041 > > + SC_P_EMMC0_CMD_CONN_EMMC0_CMD > 0x00000021 > > + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 > 0x00000021 > > + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 > 0x00000021 > > + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 > 0x00000021 > > + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 > 0x00000021 > > + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 > 0x00000021 > > + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 > 0x00000021 > > + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 > 0x00000021 > > + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 > 0x00000021 > > + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE > 0x00000041 > > + >; > > + }; > > + > > + pinctrl_usdhc2: usdhc2grp { > > + fsl,pins = < > > + SC_P_USDHC1_CLK_CONN_USDHC1_CLK > 0x06000041 > > + SC_P_USDHC1_CMD_CONN_USDHC1_CMD > 0x00000021 > > + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 > 0x00000021 > > + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 > 0x00000021 > > + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 > 0x00000021 > > + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 > 0x00000021 > > + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT > 0x00000021 > > + >; > > + }; > > +}; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > > new file mode 100644 > > index 0000000..d7cc836 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/fsl-imx8qxp.dtsi > > @@ -0,0 +1,794 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * Copyright 2017~2018 NXP > > + * Dong Aisheng <aisheng.dong@nxp.com> > > + */ > > + > > +#include <dt-bindings/clock/imx8qxp-clock.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/pinctrl/pads-imx8qxp.h> > > +#include <dt-bindings/power/imx-rsrc.h> > > + > > +#include "fsl-imx8-ca35.dtsi" > > + > > +/ { > > + compatible = "fsl,imx8qxp"; > > + interrupt-parent = <&gic>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + aliases { > > + serial0 = &dma_lpuart0; > > + mmc0 = &usdhc1; > > + mmc1 = &usdhc2; > > + mmc2 = &usdhc3; > > + }; > > + > > + memory@80000000 { > > + device_type = "memory"; > > + reg = <0x00000000 0x80000000 0 0x40000000>; > > + }; > > + > > + gic: interrupt-controller@51a00000 { > > + compatible = "arm,gic-v3"; > > + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ > > + <0x0 0x51b00000 0 0xC0000>; /* GICR (RD_base + > SGI_base) */ > > + #interrupt-cells = <3>; > > + interrupt-controller; > > + interrupts = <GIC_PPI 9 > > + (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_HIGH)>; > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ > > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ > > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ > > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ > > + clock-frequency = <8000000>; > > + }; > > + > > + scu { > > + compatible = "nxp,imx8qxp-scu", "simple-bus"; > > This is not a simple-bus. > Well, that's true. It can be changed to populate the devices in SCU driver. > > + fsl,mu = <&lsio_mu0>; > > + > > + clk: clk { > > + compatible = "fsl,imx8qxp-clk"; > > + #clock-cells = <1>; > > + }; > > + > > + iomuxc: iomuxc { > > + compatible = "fsl,imx8qxp-iomuxc"; > > + }; > > + > > + imx8qx-pm { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_lsio: PD_LSIO { > > Lower case and don't use '_' in node names. > Got it, My mistake. > Build the dtb with W=12 and fix the warnings. > Good suggestions. > > + compatible = "nxp,imx8qxp-pd"; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_lsio_pwm0: lsio_pwm0@SC_R_PWM_0 { > > Don't use defines in unit-addresses. > Got it. > > + reg = <SC_R_PWM_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_pwm1: lsio_pwm1@SC_R_PWM_1 { > > + reg = <SC_R_PWM_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_pwm2: lsio_pwm2@SC_R_PWM_2 { > > + reg = <SC_R_PWM_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_pwm3: lsio_pwm3@SC_R_PWM_3 { > > + reg = <SC_R_PWM_3>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_pwm4: lsio_pwm4@SC_R_PWM_4 { > > + reg = <SC_R_PWM_4>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_pwm5: lsio_pwm5@SC_R_PWM_5 { > > + reg = <SC_R_PWM_5>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_pwm6: lsio_pwm6@SC_R_PWM_6 { > > + reg = <SC_R_PWM_6>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_pwm7: lsio_pwm7@SC_R_PWM_7 { > > + reg = <SC_R_PWM_7>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_kpp: lsio_kpp@SC_R_KPP { > > + reg = <SC_R_KPP>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpio0: lsio_gpio0@SC_R_GPIO_0 { > > + reg = <SC_R_GPIO_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpio1: lsio_gpio1@SC_R_GPIO_1 { > > + reg = <SC_R_GPIO_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpio2: lsio_gpio2@SC_R_GPIO_2 { > > + reg = <SC_R_GPIO_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpio3: lsio_gpio3@SC_R_GPIO_3 { > > + reg = <SC_R_GPIO_3>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpio4: lsio_gpio4@SC_R_GPIO_4 { > > + reg = <SC_R_GPIO_4>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpio5: lsio_gpio5@SC_R_GPIO_5 { > > + reg = <SC_R_GPIO_5>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpio6: lsio_gpio6@SC_R_GPIO_6 { > > + reg = <SC_R_GPIO_6>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpio7: lsio_gpio7@SC_R_GPIO_7 { > > + reg = <SC_R_GPIO_7>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpt0: lsio_gpt0@SC_R_GPT_0 { > > + reg = <SC_R_GPT_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpt1: lsio_gpt1@SC_R_GPT_1 { > > + reg = <SC_R_GPT_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpt2: lsio_gpt2@SC_R_GPT_2 { > > + reg = <SC_R_GPT_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpt3: lsio_gpt3@SC_R_GPT_3 { > > + reg = <SC_R_GPT_3>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_gpt4: lsio_gpt4@SC_R_GPT_4 { > > + reg = <SC_R_GPT_4>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_flexspi0: lsio_fspi0@SC_R_FSPI_0 { > > + reg = <SC_R_FSPI_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + pd_lsio_flexspi1: lsio_fspi1@SC_R_FSPI_1 { > > + reg = <SC_R_FSPI_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_lsio>; > > + }; > > + }; > > + > > + pd_conn: connectivity_power_domain { > > + compatible = "nxp,imx8qxp-pd"; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_conn_usbotg0: conn_usb0@SC_R_USB_0 > { > > + reg = <SC_R_USB_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_usbotg0_phy: > conn_usb0_phy@SC_R_USB_0_PHY { > > + reg = <SC_R_USB_0_PHY>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_usbotg1: conn_usb1@SC_R_USB_1 > { > > + reg = <SC_R_USB_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_usb2: conn_usb2@SC_R_USB_2 { > > + reg = <SC_R_USB_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_usb2_phy: > conn_usb2_phy@SC_R_USB_2_PHY { > > + reg = <SC_R_USB_2_PHY>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_sdhc0: conn_sdhc0@SC_R_SDHC_0 > { > > + reg = <SC_R_SDHC_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_sdhc1: conn_sdhc1@SC_R_SDHC_1 > { > > + reg = <SC_R_SDHC_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_sdhc2: conn_sdhc2@SC_R_SDHC_2 > { > > + reg = <SC_R_SDHC_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_enet0: conn_enet0@SC_R_ENET_0 > { > > + reg = <SC_R_ENET_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_enet1: conn_enet1@SC_R_ENET_1 > { > > + reg = <SC_R_ENET_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_nand: conn_nand@SC_R_NAND { > > + reg = <SC_R_NAND>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_mlb0: conn_mlb0@SC_R_MLB_0 { > > + reg = <SC_R_MLB_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_conn>; > > + }; > > + pd_conn_edma_ch0: > conn_dma4_ch0@SC_R_DMA_4_CH0 { > > + reg = <SC_R_DMA_4_CH0>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_conn>; > > + }; > > + pd_conn_edma_ch1: > conn_dma4_ch1@SC_R_DMA_4_CH1 { > > + reg = <SC_R_DMA_4_CH1>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_conn>; > > + }; > > + pd_conn_edma_ch2: > conn_dma4_ch2@SC_R_DMA_4_CH2 { > > + reg = <SC_R_DMA_4_CH2>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_conn>; > > + }; > > + pd_conn_edma_ch3: > conn_dma4_ch3@SC_R_DMA_4_CH3 { > > + reg = <SC_R_DMA_4_CH3>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_conn>; > > + }; > > + pd_conn_edma_ch4: > conn_dma4_ch4@SC_R_DMA_4_CH4 { > > + reg = <SC_R_DMA_4_CH4>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_conn>; > > + }; > > + }; > > + > > + pd_dma: dma_power_domain { > > + compatible = "nxp,imx8qxp-pd"; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_dma_flexcan0: > dma_flexcan0@SC_R_CAN_0 { > > + reg = <SC_R_CAN_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_flexcan1: > dma_flexcan1@SC_R_CAN_1 { > > + reg = <SC_R_CAN_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_flexcan2: > dma_flexcan2@SC_R_CAN_2 { > > + reg = <SC_R_CAN_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_ftm0: dma_ftm0@SC_R_FTM_0 { > > + reg = <SC_R_FTM_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_ftm1: dma_ftm1@SC_R_FTM_1 { > > + reg = <SC_R_FTM_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_adc0: dma_adc0@SC_R_ADC_0 { > > + reg = <SC_R_ADC_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpi2c0: dma_lpi2c0@SC_R_I2C_0 { > > + reg = <SC_R_I2C_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpi2c1: dma_lpi2c1@SC_R_I2C_1 { > > + reg = <SC_R_I2C_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpi2c2: dma_lpi2c2@SC_R_I2C_2 { > > + reg = <SC_R_I2C_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpi2c3: dma_lpi2c3@SC_R_I2C_3 { > > + reg = <SC_R_I2C_3>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpuart0: > dma_lpuart0@SC_R_UART_0 { > > + reg = <SC_R_UART_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpuart1: > dma_lpuart1@SC_R_UART_1 { > > + reg = <SC_R_UART_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpuart2: > dma_lpuart2@SC_R_UART_2 { > > + reg = <SC_R_UART_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpuart3: > dma_lpuart3@SC_R_UART_3 { > > + reg = <SC_R_UART_3>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpspi0: dma_spi0@SC_R_SPI_0 { > > + reg = <SC_R_SPI_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpspi1: dma_spi1@SC_R_SPI_1 { > > + reg = <SC_R_SPI_1>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpspi2: dma_spi2@SC_R_SPI_2 { > > + reg = <SC_R_SPI_2>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lpspi3: dma_spi3@SC_R_SPI_3 { > > + reg = <SC_R_SPI_3>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_pwm0: > dma_pwm0@SC_R_LCD_0_PWM_0 { > > + reg = <SC_R_LCD_0_PWM_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + pd_dma_lcd0: dma_lcd0@SC_R_LCD_0 { > > + reg = <SC_R_LCD_0>; > > + #power-domain-cells = <0>; > > + power-domains = <&pd_dma>; > > + }; > > + }; > > + > > + pd_gpu: gpu-power-domain { > > + compatible = "nxp,imx8qxp-pd"; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_gpu0: gpu0@SC_R_GPU_0_PID0 { > > + reg = <SC_R_GPU_0_PID0>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_gpu>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + }; > > + }; > > + > > + pd_vpu: vpu-power-domain@SC_R_VPU_PID0 { > > + compatible = "nxp,imx8qxp-pd"; > > + reg = <SC_R_VPU_PID0>; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_vpu_core: vpu_core@SC_R_VPUCORE { > > + reg = <SC_R_VPUCORE>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_vpu>; > > + }; > > + }; > > + > > + pd_hsio: hsio-power-domain { > > + compatible = "nxp,imx8qxp-pd"; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_pcie: hsio-pcie-pd@SC_R_PCIE_A { > > + reg = <SC_R_PCIE_A>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_hsio>; > > + }; > > + }; > > + > > + pd_dc: dc-power-domain { > > + compatible = "nxp,imx8qxp-pd"; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_dc0: dc0-power-domain@SC_R_DC_0 { > > + reg = <SC_R_DC_0>; > > + #power-domain-cells = <0>; > > + power-domains =<&pd_dc>; > > + }; > > + }; > > + > > + pd_mipi_dsi: > mipi0_dsi_power_domain@SC_R_MIPI_0 { > > + compatible = "nxp,imx8qxp-pd"; > > + reg = <SC_R_MIPI_0>; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_mipi_dsi_i2c0: > mipi0_dsi_i2c0@SC_R_MIPI_0_I2C_0 { > > + reg = <SC_R_MIPI_0_I2C_0>; > > + power-domains =<&pd_mipi_dsi>; > > + }; > > + pd_mipi_dsi_i2c1: > mipi0_dsi_i2c1@SC_R_MIPI_0_I2C_1 { > > + reg = <SC_R_MIPI_0_I2C_1>; > > + power-domains =<&pd_mipi_dsi>; > > + }; > > + pd_mipi_pwm0: > mipi0_dsi_pwm0@SC_R_MIPI_0_PWM_0 { > > + reg = <SC_R_MIPI_0_PWM_0>; > > + power-domains =<&pd_mipi_dsi>; > > + }; > > + }; > > + > > + pd_mipi_csi: mipi_csi0_power_domain@SC_R_CSI_0 > { > > + compatible = "nxp,imx8qxp-pd"; > > + reg = <SC_R_CSI_0>; > > + #power-domain-cells = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pd_mipi_csi0_i2c0: > mipi_csi0_i2c@SC_R_CSI_0_I2C_0 { > > + reg = <SC_R_CSI_0_I2C_0>; > > + power-domains =<&pd_mipi_csi>; > > + }; > > + pd_mipi_csi0_pwm0: > mipi_csi0_pwm@SC_R_CSI_0_PWM_0 { > > + reg = <SC_R_CSI_0_PWM_0>; > > + power-domains =<&pd_mipi_csi>; > > + }; > > + }; > > + }; > > + }; > > + > > + gpu: gpu@53100000 { > > + compatible = "fsl,imx8qxp-gpu", "fsl,imx8x-gpu"; > > Documented? > No. Does it have to be documented first before we can write it in dts files? If yes, maybe I can remove GPU node first as it actually is far from being working right now. > > + reg = <0x0 0x53100000 0 0x40000>, > > + <0x0 0x80000000 0x0 0x08000000>, > > + <0x0 0x0 0x0 0x2000000>; > > + reg-names = "iobase_3d_0", "phys_baseaddr", > > + "contiguous_mem"; > > Putting your RAM base address in here is not okay. And contiguous_mem > looks suspicious too. > Got it. > > + interrupts = <0 64 0x4>; > > + interrupt-names = "irq_3d_0"; > > + clocks = <&clk IMX8QXP_GPU0_CORE_CLK>, > > + <&clk IMX8QXP_GPU0_SHADER_CLK>; > > + clock-names = "clk_core_3d_0", "clk_shader_3d_0"; > > + assigned-clocks = <&clk IMX8QXP_GPU0_CORE_CLK>, > > + <&clk IMX8QXP_GPU0_SHADER_CLK>; > > + assigned-clock-rates = <650000000>, <700000000>; > > + status = "disabled"; > > + }; > > + > > + audio_subsys: audio@59000000 { > > bus@... > Got it > if this is just a simple-bus. MX8QM/QXP is consisted of a number of different HW block subsystems Which Includes different IP modules. Audio subsystem is one of them. It looks like a simple-bus. So I will change to it. If any issue, please let me know. > > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + reg = <0x0 0x59000000 0x0 0x1000000>; > > + ranges; > > + }; > > + > > + dma_subsys: dma@5a000000 { > > bus@... > > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > Really need 64-bits of size? > Just used to align with child nodes. Any better suggestion? > > + reg = <0x0 0x5a000000 0x0 0x1000000>; > > If you have registers for the bus, then it is not a simple-bus (or at > least should have a more specific compatible in addition). > It could be removed. It's just subsystem address space range. > > + ranges; > > A non-empty ranges is preferred to limit the address space of the bus. > Got it. > > + > > + dma_lpuart0: serial@5a060000 { > > + compatible = "fsl,imx7ulp-lpuart"; > > + reg = <0x0 0x5a060000 0x0 0x1000>; > > + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-parent = <&gic>; > > + clocks = <&clk IMX8QXP_UART0_CLK>; > > + clock-names = "ipg"; > > + status = "disabled"; > > + }; > > + > > + dma_i2c0: i2c@5a800000 { > > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; > > + reg = <0x0 0x5a800000 0x0 0x4000>; > > + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-parent = <&gic>; > > + clocks = <&clk IMX8QXP_I2C0_CLK>; > > + clock-names = "per"; > > + assigned-clocks = <&clk IMX8QXP_I2C0_CLK>; > > + assigned-clock-rates = <24000000>; > > + power-domains = <&pd_dma_lpi2c0>; > > What does the power-domain control exactly? An I2C controller isn't big > enough to have power gates and you already have clocks defined here, so > what else is there? > On MX8, Every IP module reside in a subsystem has a power domain. IP module simply power on/off domains according to requirements, and SCU firmware will check and may do extra power off of the whole subsystem if no child using it. So each modules has to operate it properly. > > + status = "disabled"; > > + }; > > + > > + dma_i2c1: i2c@5a810000 { > > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; > > + reg = <0x0 0x5a810000 0x0 0x4000>; > > + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-parent = <&gic>; > > + clocks = <&clk IMX8QXP_I2C1_CLK>; > > + clock-names = "per"; > > + assigned-clocks = <&clk IMX8QXP_I2C1_CLK>; > > + assigned-clock-rates = <24000000>; > > + status = "disabled"; > > + }; > > + > > + dma_i2c2: i2c@5a820000 { > > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; > > + reg = <0x0 0x5a820000 0x0 0x4000>; > > + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-parent = <&gic>; > > + clocks = <&clk IMX8QXP_I2C2_CLK>; > > + clock-names = "per"; > > + assigned-clocks = <&clk IMX8QXP_I2C2_CLK>; > > + assigned-clock-rates = <24000000>; > > + power-domains = <&pd_dma_lpi2c2>; > > + status = "disabled"; > > + }; > > + > > + dma_i2c3: i2c@5a830000 { > > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; > > + reg = <0x0 0x5a830000 0x0 0x4000>; > > + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-parent = <&gic>; > > + clocks = <&clk IMX8QXP_I2C3_CLK>; > > + clock-names = "per"; > > + assigned-clocks = <&clk IMX8QXP_I2C3_CLK>; > > + assigned-clock-rates = <24000000>; > > + power-domains = <&pd_dma_lpi2c3>; > > + status = "disabled"; > > + }; > > + }; > > + > > + conn_subsys: conn@5b000000 { > > bus@... > > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + reg = <0x0 0x5b000000 0x0 0x1000000>; > > + ranges; > > Same comments here. > > > + > > + usdhc1: usdhc@5b010000 { > > mmc@... > Got it > > + compatible = "fsl,imx7d-usdhc"; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; > > + reg = <0x0 0x5b010000 0x0 0x10000>; > > Really have 64KB of registers? > The real IP register address does not have 64KB. It's just IP slot address space Defined in RM. Need change it according to real address range? Regards Dong Aisheng > > + clocks = <&clk IMX8QXP_SDHC0_IPG_CLK>, > > + <&clk IMX8QXP_SDHC0_CLK>, > > + <&clk IMX8QXP_CLK_DUMMY>; > > + clock-names = "ipg", "per", "ahb"; > > + assigned-clocks = <&clk IMX8QXP_SDHC0_DIV>; > > + assigned-clock-rates = <200000000>; > > + power-domains = <&pd_conn_sdhc0>; > > + status = "disabled"; > > + }; > > + > > + usdhc2: usdhc@5b020000 { > > + compatible = "fsl,imx7d-usdhc"; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; > > + reg = <0x0 0x5b020000 0x0 0x10000>; > > + clocks = <&clk IMX8QXP_SDHC1_IPG_CLK>, > > + <&clk IMX8QXP_SDHC1_CLK>, > > + <&clk IMX8QXP_CLK_DUMMY>; > > + clock-names = "ipg", "per", "ahb"; > > + assigned-clocks = <&clk IMX8QXP_SDHC1_DIV>; > > + assigned-clock-rates = <200000000>; > > + power-domains = <&pd_conn_sdhc1>; > > + fsl,tuning-start-tap = <20>; > > + fsl,tuning-step= <2>; > > + status = "disabled"; > > + }; > > + > > + usdhc3: usdhc@5b030000 { > > + compatible = "fsl,imx7d-usdhc"; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; > > + reg = <0x0 0x5b030000 0x0 0x10000>; > > + clocks = <&clk IMX8QXP_SDHC2_IPG_CLK>, > > + <&clk IMX8QXP_SDHC2_CLK>, > > + <&clk IMX8QXP_CLK_DUMMY>; > > + clock-names = "ipg", "per", "ahb"; > > + assigned-clocks = <&clk IMX8QXP_SDHC2_DIV>; > > + assigned-clock-rates = <200000000>; > > + power-domains = <&pd_conn_sdhc2>; > > + status = "disabled"; > > + }; > > + > > + fec1: ethernet@5b040000 { > > + compatible = "fsl,imx6sx-fec"; > > + reg = <0x0 0x5b040000 0x0 0x10000>; > > + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 256 > IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 257 > IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 259 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8QXP_ENET0_IPG_CLK>, <&clk > IMX8QXP_ENET0_AHB_CLK>, <&clk IMX8QXP_ENET0_TX_CLK>, > > + <&clk IMX8QXP_ENET0_PTP_CLK>; > > + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; > > + assigned-clocks = <&clk IMX8QXP_ENET0_REF_DIV>, > <&clk IMX8QXP_ENET0_PTP_CLK>; > > + assigned-clock-rates = <125000000>, <125000000>; > > + fsl,num-tx-queues=<3>; > > + fsl,num-rx-queues=<3>; > > + power-domains = <&pd_conn_enet0>; > > + status = "disabled"; > > + }; > > + > > + fec2: ethernet@5b050000 { > > + compatible = "fsl,imx8qxp-fec"; > > + reg = <0x0 0x5b050000 0x0 0x10000>; > > + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 260 > IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 261 > IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 263 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8QXP_ENET1_IPG_CLK>, <&clk > IMX8QXP_ENET1_AHB_CLK>, <&clk IMX8QXP_ENET1_TX_CLK>, > > + <&clk IMX8QXP_ENET1_PTP_CLK>; > > + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; > > + assigned-clocks = <&clk IMX8QXP_ENET1_REF_DIV>, > <&clk IMX8QXP_ENET1_PTP_CLK>; > > + assigned-clock-rates = <125000000>, <125000000>; > > + fsl,num-tx-queues=<3>; > > + fsl,num-rx-queues=<3>; > > + power-domains = <&pd_conn_enet1>; > > + status = "disabled"; > > + }; > > + }; > > + > > + db_subsys: db@5c000000 { > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + reg = <0x0 0x5c000000 0x0 0x1000000>; > > + ranges; > > + > > + ddr_pmu0: ddr_pmu@5c020000 { > > + compatible = "fsl,imx8-ddr-pmu"; > > + reg = <0x0 0x5c020000 0x0 0x10000>; > > + }; > > + }; > > + > > + lsio_subsys: lsio@5d000000 { > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + reg = <0x0 0x5d000000 0x0 0x1000000>; > > + ranges; > > + > > + lsio_mu0: mu@5d1b0000 { > > + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; > > + reg = <0x0 0x5d1b0000 0x0 0x10000>; > > + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + lsio_gpio0: gpio@5d080000 { > > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > > + reg = <0x0 0x5d080000 0x0 0x10000>; > > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + lsio_gpio1: gpio@5d090000 { > > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > > + reg = <0x0 0x5d090000 0x0 0x10000>; > > + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + lsio_gpio2: gpio@5d0a0000 { > > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > > + reg = <0x0 0x5d0a0000 0x0 0x10000>; > > + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + lsio_gpio3: gpio@5d0b0000 { > > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > > + reg = <0x0 0x5d0b0000 0x0 0x10000>; > > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + lsio_gpio4: gpio@5d0c0000 { > > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > > + reg = <0x0 0x5d0c0000 0x0 0x10000>; > > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + lsio_gpio5: gpio@5d0d0000 { > > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > > + reg = <0x0 0x5d0d0000 0x0 0x10000>; > > + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + lsio_gpio6: gpio@5d0e0000 { > > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > > + reg = <0x0 0x5d0e0000 0x0 0x10000>; > > + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + lsio_gpio7: gpio@5d0f0000 { > > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; > > + reg = <0x0 0x5d0f0000 0x0 0x10000>; > > + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + }; > > + > > + hsio_subsys: hsio@5f000000 { > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + reg = <0x0 0x5f000000 0x0 0x1000000>; > > + ranges; > > + }; > > + > > +}; > > diff --git a/include/dt-bindings/power/imx-rsrc.h b/include/dt- > bindings/power/imx-rsrc.h > > new file mode 100644 > > index 0000000..b4d0980 > > --- /dev/null > > +++ b/include/dt-bindings/power/imx-rsrc.h > > @@ -0,0 +1,558 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * Copyright 2017~2018 NXP > > + */ > > + > > +#ifndef __DT_BINDINGS_RSCRC_IMX_H > > +#define __DT_BINDINGS_RSCRC_IMX_H > > + > > +/* > > + * These defines are used to indicate a resource. Resources include > peripherals > > + * and bus masters (but not memory regions). Note items from list should > > + * never be changed or removed (only added to at the end of the list). > > + */ > > +#define SC_R_A53 0 > > +#define SC_R_A53_0 1 > > +#define SC_R_A53_1 2 > > +#define SC_R_A53_2 3 > > +#define SC_R_A53_3 4 > > +#define SC_R_A72 5 > > +#define SC_R_A72_0 6 > > +#define SC_R_A72_1 7 > > +#define SC_R_A72_2 8 > > +#define SC_R_A72_3 9 > > +#define SC_R_CCI 10 > > +#define SC_R_DB 11 > > +#define SC_R_DRC_0 12 > > +#define SC_R_DRC_1 13 > > +#define SC_R_GIC_SMMU 14 > > +#define SC_R_IRQSTR_M4_0 15 > > +#define SC_R_IRQSTR_M4_1 16 > > +#define SC_R_SMMU 17 > > +#define SC_R_GIC 18 > > +#define SC_R_DC_0_BLIT0 19 > > +#define SC_R_DC_0_BLIT1 20 > > +#define SC_R_DC_0_BLIT2 21 > > +#define SC_R_DC_0_BLIT_OUT 22 > > +#define SC_R_DC_0_CAPTURE0 23 > > +#define SC_R_DC_0_CAPTURE1 24 > > +#define SC_R_DC_0_WARP 25 > > +#define SC_R_DC_0_INTEGRAL0 26 > > +#define SC_R_DC_0_INTEGRAL1 27 > > +#define SC_R_DC_0_VIDEO0 28 > > +#define SC_R_DC_0_VIDEO1 29 > > +#define SC_R_DC_0_FRAC0 30 > > +#define SC_R_DC_0_FRAC1 31 > > +#define SC_R_DC_0 32 > > +#define SC_R_GPU_2_PID0 33 > > +#define SC_R_DC_0_PLL_0 34 > > +#define SC_R_DC_0_PLL_1 35 > > +#define SC_R_DC_1_BLIT0 36 > > +#define SC_R_DC_1_BLIT1 37 > > +#define SC_R_DC_1_BLIT2 38 > > +#define SC_R_DC_1_BLIT_OUT 39 > > +#define SC_R_DC_1_CAPTURE0 40 > > +#define SC_R_DC_1_CAPTURE1 41 > > +#define SC_R_DC_1_WARP 42 > > +#define SC_R_DC_1_INTEGRAL0 43 > > +#define SC_R_DC_1_INTEGRAL1 44 > > +#define SC_R_DC_1_VIDEO0 45 > > +#define SC_R_DC_1_VIDEO1 46 > > +#define SC_R_DC_1_FRAC0 47 > > +#define SC_R_DC_1_FRAC1 48 > > +#define SC_R_DC_1 49 > > +#define SC_R_GPU_3_PID0 50 > > +#define SC_R_DC_1_PLL_0 51 > > +#define SC_R_DC_1_PLL_1 52 > > +#define SC_R_SPI_0 53 > > +#define SC_R_SPI_1 54 > > +#define SC_R_SPI_2 55 > > +#define SC_R_SPI_3 56 > > +#define SC_R_UART_0 57 > > +#define SC_R_UART_1 58 > > +#define SC_R_UART_2 59 > > +#define SC_R_UART_3 60 > > +#define SC_R_UART_4 61 > > +#define SC_R_EMVSIM_0 62 > > +#define SC_R_EMVSIM_1 63 > > +#define SC_R_DMA_0_CH0 64 > > +#define SC_R_DMA_0_CH1 65 > > +#define SC_R_DMA_0_CH2 66 > > +#define SC_R_DMA_0_CH3 67 > > +#define SC_R_DMA_0_CH4 68 > > +#define SC_R_DMA_0_CH5 69 > > +#define SC_R_DMA_0_CH6 70 > > +#define SC_R_DMA_0_CH7 71 > > +#define SC_R_DMA_0_CH8 72 > > +#define SC_R_DMA_0_CH9 73 > > +#define SC_R_DMA_0_CH10 74 > > +#define SC_R_DMA_0_CH11 75 > > +#define SC_R_DMA_0_CH12 76 > > +#define SC_R_DMA_0_CH13 77 > > +#define SC_R_DMA_0_CH14 78 > > +#define SC_R_DMA_0_CH15 79 > > +#define SC_R_DMA_0_CH16 80 > > +#define SC_R_DMA_0_CH17 81 > > +#define SC_R_DMA_0_CH18 82 > > +#define SC_R_DMA_0_CH19 83 > > +#define SC_R_DMA_0_CH20 84 > > +#define SC_R_DMA_0_CH21 85 > > +#define SC_R_DMA_0_CH22 86 > > +#define SC_R_DMA_0_CH23 87 > > +#define SC_R_DMA_0_CH24 88 > > +#define SC_R_DMA_0_CH25 89 > > +#define SC_R_DMA_0_CH26 90 > > +#define SC_R_DMA_0_CH27 91 > > +#define SC_R_DMA_0_CH28 92 > > +#define SC_R_DMA_0_CH29 93 > > +#define SC_R_DMA_0_CH30 94 > > +#define SC_R_DMA_0_CH31 95 > > +#define SC_R_I2C_0 96 > > +#define SC_R_I2C_1 97 > > +#define SC_R_I2C_2 98 > > +#define SC_R_I2C_3 99 > > +#define SC_R_I2C_4 100 > > +#define SC_R_ADC_0 101 > > +#define SC_R_ADC_1 102 > > +#define SC_R_FTM_0 103 > > +#define SC_R_FTM_1 104 > > +#define SC_R_CAN_0 105 > > +#define SC_R_CAN_1 106 > > +#define SC_R_CAN_2 107 > > +#define SC_R_DMA_1_CH0 108 > > +#define SC_R_DMA_1_CH1 109 > > +#define SC_R_DMA_1_CH2 110 > > +#define SC_R_DMA_1_CH3 111 > > +#define SC_R_DMA_1_CH4 112 > > +#define SC_R_DMA_1_CH5 113 > > +#define SC_R_DMA_1_CH6 114 > > +#define SC_R_DMA_1_CH7 115 > > +#define SC_R_DMA_1_CH8 116 > > +#define SC_R_DMA_1_CH9 117 > > +#define SC_R_DMA_1_CH10 118 > > +#define SC_R_DMA_1_CH11 119 > > +#define SC_R_DMA_1_CH12 120 > > +#define SC_R_DMA_1_CH13 121 > > +#define SC_R_DMA_1_CH14 122 > > +#define SC_R_DMA_1_CH15 123 > > +#define SC_R_DMA_1_CH16 124 > > +#define SC_R_DMA_1_CH17 125 > > +#define SC_R_DMA_1_CH18 126 > > +#define SC_R_DMA_1_CH19 127 > > +#define SC_R_DMA_1_CH20 128 > > +#define SC_R_DMA_1_CH21 129 > > +#define SC_R_DMA_1_CH22 130 > > +#define SC_R_DMA_1_CH23 131 > > +#define SC_R_DMA_1_CH24 132 > > +#define SC_R_DMA_1_CH25 133 > > +#define SC_R_DMA_1_CH26 134 > > +#define SC_R_DMA_1_CH27 135 > > +#define SC_R_DMA_1_CH28 136 > > +#define SC_R_DMA_1_CH29 137 > > +#define SC_R_DMA_1_CH30 138 > > +#define SC_R_DMA_1_CH31 139 > > +#define SC_R_UNUSED1 140 > > +#define SC_R_UNUSED2 141 > > +#define SC_R_UNUSED3 142 > > +#define SC_R_UNUSED4 143 > > +#define SC_R_GPU_0_PID0 144 > > +#define SC_R_GPU_0_PID1 145 > > +#define SC_R_GPU_0_PID2 146 > > +#define SC_R_GPU_0_PID3 147 > > +#define SC_R_GPU_1_PID0 148 > > +#define SC_R_GPU_1_PID1 149 > > +#define SC_R_GPU_1_PID2 150 > > +#define SC_R_GPU_1_PID3 151 > > +#define SC_R_PCIE_A 152 > > +#define SC_R_SERDES_0 153 > > +#define SC_R_MATCH_0 154 > > +#define SC_R_MATCH_1 155 > > +#define SC_R_MATCH_2 156 > > +#define SC_R_MATCH_3 157 > > +#define SC_R_MATCH_4 158 > > +#define SC_R_MATCH_5 159 > > +#define SC_R_MATCH_6 160 > > +#define SC_R_MATCH_7 161 > > +#define SC_R_MATCH_8 162 > > +#define SC_R_MATCH_9 163 > > +#define SC_R_MATCH_10 164 > > +#define SC_R_MATCH_11 165 > > +#define SC_R_MATCH_12 166 > > +#define SC_R_MATCH_13 167 > > +#define SC_R_MATCH_14 168 > > +#define SC_R_PCIE_B 169 > > +#define SC_R_SATA_0 170 > > +#define SC_R_SERDES_1 171 > > +#define SC_R_HSIO_GPIO 172 > > +#define SC_R_MATCH_15 173 > > +#define SC_R_MATCH_16 174 > > +#define SC_R_MATCH_17 175 > > +#define SC_R_MATCH_18 176 > > +#define SC_R_MATCH_19 177 > > +#define SC_R_MATCH_20 178 > > +#define SC_R_MATCH_21 179 > > +#define SC_R_MATCH_22 180 > > +#define SC_R_MATCH_23 181 > > +#define SC_R_MATCH_24 182 > > +#define SC_R_MATCH_25 183 > > +#define SC_R_MATCH_26 184 > > +#define SC_R_MATCH_27 185 > > +#define SC_R_MATCH_28 186 > > +#define SC_R_LCD_0 187 > > +#define SC_R_LCD_0_PWM_0 188 > > +#define SC_R_LCD_0_I2C_0 189 > > +#define SC_R_LCD_0_I2C_1 190 > > +#define SC_R_PWM_0 191 > > +#define SC_R_PWM_1 192 > > +#define SC_R_PWM_2 193 > > +#define SC_R_PWM_3 194 > > +#define SC_R_PWM_4 195 > > +#define SC_R_PWM_5 196 > > +#define SC_R_PWM_6 197 > > +#define SC_R_PWM_7 198 > > +#define SC_R_GPIO_0 199 > > +#define SC_R_GPIO_1 200 > > +#define SC_R_GPIO_2 201 > > +#define SC_R_GPIO_3 202 > > +#define SC_R_GPIO_4 203 > > +#define SC_R_GPIO_5 204 > > +#define SC_R_GPIO_6 205 > > +#define SC_R_GPIO_7 206 > > +#define SC_R_GPT_0 207 > > +#define SC_R_GPT_1 208 > > +#define SC_R_GPT_2 209 > > +#define SC_R_GPT_3 210 > > +#define SC_R_GPT_4 211 > > +#define SC_R_KPP 212 > > +#define SC_R_MU_0A 213 > > +#define SC_R_MU_1A 214 > > +#define SC_R_MU_2A 215 > > +#define SC_R_MU_3A 216 > > +#define SC_R_MU_4A 217 > > +#define SC_R_MU_5A 218 > > +#define SC_R_MU_6A 219 > > +#define SC_R_MU_7A 220 > > +#define SC_R_MU_8A 221 > > +#define SC_R_MU_9A 222 > > +#define SC_R_MU_10A 223 > > +#define SC_R_MU_11A 224 > > +#define SC_R_MU_12A 225 > > +#define SC_R_MU_13A 226 > > +#define SC_R_MU_5B 227 > > +#define SC_R_MU_6B 228 > > +#define SC_R_MU_7B 229 > > +#define SC_R_MU_8B 230 > > +#define SC_R_MU_9B 231 > > +#define SC_R_MU_10B 232 > > +#define SC_R_MU_11B 233 > > +#define SC_R_MU_12B 234 > > +#define SC_R_MU_13B 235 > > +#define SC_R_ROM_0 236 > > +#define SC_R_FSPI_0 237 > > +#define SC_R_FSPI_1 238 > > +#define SC_R_IEE 239 > > +#define SC_R_IEE_R0 240 > > +#define SC_R_IEE_R1 241 > > +#define SC_R_IEE_R2 242 > > +#define SC_R_IEE_R3 243 > > +#define SC_R_IEE_R4 244 > > +#define SC_R_IEE_R5 245 > > +#define SC_R_IEE_R6 246 > > +#define SC_R_IEE_R7 247 > > +#define SC_R_SDHC_0 248 > > +#define SC_R_SDHC_1 249 > > +#define SC_R_SDHC_2 250 > > +#define SC_R_ENET_0 251 > > +#define SC_R_ENET_1 252 > > +#define SC_R_MLB_0 253 > > +#define SC_R_DMA_2_CH0 254 > > +#define SC_R_DMA_2_CH1 255 > > +#define SC_R_DMA_2_CH2 256 > > +#define SC_R_DMA_2_CH3 257 > > +#define SC_R_DMA_2_CH4 258 > > +#define SC_R_USB_0 259 > > +#define SC_R_USB_1 260 > > +#define SC_R_USB_0_PHY 261 > > +#define SC_R_USB_2 262 > > +#define SC_R_USB_2_PHY 263 > > +#define SC_R_DTCP 264 > > +#define SC_R_NAND 265 > > +#define SC_R_LVDS_0 266 > > +#define SC_R_LVDS_0_PWM_0 267 > > +#define SC_R_LVDS_0_I2C_0 268 > > +#define SC_R_LVDS_0_I2C_1 269 > > +#define SC_R_LVDS_1 270 > > +#define SC_R_LVDS_1_PWM_0 271 > > +#define SC_R_LVDS_1_I2C_0 272 > > +#define SC_R_LVDS_1_I2C_1 273 > > +#define SC_R_LVDS_2 274 > > +#define SC_R_LVDS_2_PWM_0 275 > > +#define SC_R_LVDS_2_I2C_0 276 > > +#define SC_R_LVDS_2_I2C_1 277 > > +#define SC_R_M4_0_PID0 278 > > +#define SC_R_M4_0_PID1 279 > > +#define SC_R_M4_0_PID2 280 > > +#define SC_R_M4_0_PID3 281 > > +#define SC_R_M4_0_PID4 282 > > +#define SC_R_M4_0_RGPIO 283 > > +#define SC_R_M4_0_SEMA42 284 > > +#define SC_R_M4_0_TPM 285 > > +#define SC_R_M4_0_PIT 286 > > +#define SC_R_M4_0_UART 287 > > +#define SC_R_M4_0_I2C 288 > > +#define SC_R_M4_0_INTMUX 289 > > +#define SC_R_M4_0_SIM 290 > > +#define SC_R_M4_0_WDOG 291 > > +#define SC_R_M4_0_MU_0B 292 > > +#define SC_R_M4_0_MU_0A0 293 > > +#define SC_R_M4_0_MU_0A1 294 > > +#define SC_R_M4_0_MU_0A2 295 > > +#define SC_R_M4_0_MU_0A3 296 > > +#define SC_R_M4_0_MU_1A 297 > > +#define SC_R_M4_1_PID0 298 > > +#define SC_R_M4_1_PID1 299 > > +#define SC_R_M4_1_PID2 300 > > +#define SC_R_M4_1_PID3 301 > > +#define SC_R_M4_1_PID4 302 > > +#define SC_R_M4_1_RGPIO 303 > > +#define SC_R_M4_1_SEMA42 304 > > +#define SC_R_M4_1_TPM 305 > > +#define SC_R_M4_1_PIT 306 > > +#define SC_R_M4_1_UART 307 > > +#define SC_R_M4_1_I2C 308 > > +#define SC_R_M4_1_INTMUX 309 > > +#define SC_R_M4_1_SIM 310 > > +#define SC_R_M4_1_WDOG 311 > > +#define SC_R_M4_1_MU_0B 312 > > +#define SC_R_M4_1_MU_0A0 313 > > +#define SC_R_M4_1_MU_0A1 314 > > +#define SC_R_M4_1_MU_0A2 315 > > +#define SC_R_M4_1_MU_0A3 316 > > +#define SC_R_M4_1_MU_1A 317 > > +#define SC_R_SAI_0 318 > > +#define SC_R_SAI_1 319 > > +#define SC_R_SAI_2 320 > > +#define SC_R_IRQSTR_SCU2 321 > > +#define SC_R_IRQSTR_DSP 322 > > +#define SC_R_UNUSED5 323 > > +#define SC_R_UNUSED6 324 > > +#define SC_R_AUDIO_PLL_0 325 > > +#define SC_R_PI_0 326 > > +#define SC_R_PI_0_PWM_0 327 > > +#define SC_R_PI_0_PWM_1 328 > > +#define SC_R_PI_0_I2C_0 329 > > +#define SC_R_PI_0_PLL 330 > > +#define SC_R_PI_1 331 > > +#define SC_R_PI_1_PWM_0 332 > > +#define SC_R_PI_1_PWM_1 333 > > +#define SC_R_PI_1_I2C_0 334 > > +#define SC_R_PI_1_PLL 335 > > +#define SC_R_SC_PID0 336 > > +#define SC_R_SC_PID1 337 > > +#define SC_R_SC_PID2 338 > > +#define SC_R_SC_PID3 339 > > +#define SC_R_SC_PID4 340 > > +#define SC_R_SC_SEMA42 341 > > +#define SC_R_SC_TPM 342 > > +#define SC_R_SC_PIT 343 > > +#define SC_R_SC_UART 344 > > +#define SC_R_SC_I2C 345 > > +#define SC_R_SC_MU_0B 346 > > +#define SC_R_SC_MU_0A0 347 > > +#define SC_R_SC_MU_0A1 348 > > +#define SC_R_SC_MU_0A2 349 > > +#define SC_R_SC_MU_0A3 350 > > +#define SC_R_SC_MU_1A 351 > > +#define SC_R_SYSCNT_RD 352 > > +#define SC_R_SYSCNT_CMP 353 > > +#define SC_R_DEBUG 354 > > +#define SC_R_SYSTEM 355 > > +#define SC_R_SNVS 356 > > +#define SC_R_OTP 357 > > +#define SC_R_VPU_PID0 358 > > +#define SC_R_VPU_PID1 359 > > +#define SC_R_VPU_PID2 360 > > +#define SC_R_VPU_PID3 361 > > +#define SC_R_VPU_PID4 362 > > +#define SC_R_VPU_PID5 363 > > +#define SC_R_VPU_PID6 364 > > +#define SC_R_VPU_PID7 365 > > +#define SC_R_VPU_UART 366 > > +#define SC_R_VPUCORE 367 > > +#define SC_R_VPUCORE_0 368 > > +#define SC_R_VPUCORE_1 369 > > +#define SC_R_VPUCORE_2 370 > > +#define SC_R_VPUCORE_3 371 > > +#define SC_R_DMA_4_CH0 372 > > +#define SC_R_DMA_4_CH1 373 > > +#define SC_R_DMA_4_CH2 374 > > +#define SC_R_DMA_4_CH3 375 > > +#define SC_R_DMA_4_CH4 376 > > +#define SC_R_ISI_CH0 377 > > +#define SC_R_ISI_CH1 378 > > +#define SC_R_ISI_CH2 379 > > +#define SC_R_ISI_CH3 380 > > +#define SC_R_ISI_CH4 381 > > +#define SC_R_ISI_CH5 382 > > +#define SC_R_ISI_CH6 383 > > +#define SC_R_ISI_CH7 384 > > +#define SC_R_MJPEG_DEC_S0 385 > > +#define SC_R_MJPEG_DEC_S1 386 > > +#define SC_R_MJPEG_DEC_S2 387 > > +#define SC_R_MJPEG_DEC_S3 388 > > +#define SC_R_MJPEG_ENC_S0 389 > > +#define SC_R_MJPEG_ENC_S1 390 > > +#define SC_R_MJPEG_ENC_S2 391 > > +#define SC_R_MJPEG_ENC_S3 392 > > +#define SC_R_MIPI_0 393 > > +#define SC_R_MIPI_0_PWM_0 394 > > +#define SC_R_MIPI_0_I2C_0 395 > > +#define SC_R_MIPI_0_I2C_1 396 > > +#define SC_R_MIPI_1 397 > > +#define SC_R_MIPI_1_PWM_0 398 > > +#define SC_R_MIPI_1_I2C_0 399 > > +#define SC_R_MIPI_1_I2C_1 400 > > +#define SC_R_CSI_0 401 > > +#define SC_R_CSI_0_PWM_0 402 > > +#define SC_R_CSI_0_I2C_0 403 > > +#define SC_R_CSI_1 404 > > +#define SC_R_CSI_1_PWM_0 405 > > +#define SC_R_CSI_1_I2C_0 406 > > +#define SC_R_HDMI 407 > > +#define SC_R_HDMI_I2S 408 > > +#define SC_R_HDMI_I2C_0 409 > > +#define SC_R_HDMI_PLL_0 410 > > +#define SC_R_HDMI_RX 411 > > +#define SC_R_HDMI_RX_BYPASS 412 > > +#define SC_R_HDMI_RX_I2C_0 413 > > +#define SC_R_ASRC_0 414 > > +#define SC_R_ESAI_0 415 > > +#define SC_R_SPDIF_0 416 > > +#define SC_R_SPDIF_1 417 > > +#define SC_R_SAI_3 418 > > +#define SC_R_SAI_4 419 > > +#define SC_R_SAI_5 420 > > +#define SC_R_GPT_5 421 > > +#define SC_R_GPT_6 422 > > +#define SC_R_GPT_7 423 > > +#define SC_R_GPT_8 424 > > +#define SC_R_GPT_9 425 > > +#define SC_R_GPT_10 426 > > +#define SC_R_DMA_2_CH5 427 > > +#define SC_R_DMA_2_CH6 428 > > +#define SC_R_DMA_2_CH7 429 > > +#define SC_R_DMA_2_CH8 430 > > +#define SC_R_DMA_2_CH9 431 > > +#define SC_R_DMA_2_CH10 432 > > +#define SC_R_DMA_2_CH11 433 > > +#define SC_R_DMA_2_CH12 434 > > +#define SC_R_DMA_2_CH13 435 > > +#define SC_R_DMA_2_CH14 436 > > +#define SC_R_DMA_2_CH15 437 > > +#define SC_R_DMA_2_CH16 438 > > +#define SC_R_DMA_2_CH17 439 > > +#define SC_R_DMA_2_CH18 440 > > +#define SC_R_DMA_2_CH19 441 > > +#define SC_R_DMA_2_CH20 442 > > +#define SC_R_DMA_2_CH21 443 > > +#define SC_R_DMA_2_CH22 444 > > +#define SC_R_DMA_2_CH23 445 > > +#define SC_R_DMA_2_CH24 446 > > +#define SC_R_DMA_2_CH25 447 > > +#define SC_R_DMA_2_CH26 448 > > +#define SC_R_DMA_2_CH27 449 > > +#define SC_R_DMA_2_CH28 450 > > +#define SC_R_DMA_2_CH29 451 > > +#define SC_R_DMA_2_CH30 452 > > +#define SC_R_DMA_2_CH31 453 > > +#define SC_R_ASRC_1 454 > > +#define SC_R_ESAI_1 455 > > +#define SC_R_SAI_6 456 > > +#define SC_R_SAI_7 457 > > +#define SC_R_AMIX 458 > > +#define SC_R_MQS_0 459 > > +#define SC_R_DMA_3_CH0 460 > > +#define SC_R_DMA_3_CH1 461 > > +#define SC_R_DMA_3_CH2 462 > > +#define SC_R_DMA_3_CH3 463 > > +#define SC_R_DMA_3_CH4 464 > > +#define SC_R_DMA_3_CH5 465 > > +#define SC_R_DMA_3_CH6 466 > > +#define SC_R_DMA_3_CH7 467 > > +#define SC_R_DMA_3_CH8 468 > > +#define SC_R_DMA_3_CH9 469 > > +#define SC_R_DMA_3_CH10 470 > > +#define SC_R_DMA_3_CH11 471 > > +#define SC_R_DMA_3_CH12 472 > > +#define SC_R_DMA_3_CH13 473 > > +#define SC_R_DMA_3_CH14 474 > > +#define SC_R_DMA_3_CH15 475 > > +#define SC_R_DMA_3_CH16 476 > > +#define SC_R_DMA_3_CH17 477 > > +#define SC_R_DMA_3_CH18 478 > > +#define SC_R_DMA_3_CH19 479 > > +#define SC_R_DMA_3_CH20 480 > > +#define SC_R_DMA_3_CH21 481 > > +#define SC_R_DMA_3_CH22 482 > > +#define SC_R_DMA_3_CH23 483 > > +#define SC_R_DMA_3_CH24 484 > > +#define SC_R_DMA_3_CH25 485 > > +#define SC_R_DMA_3_CH26 486 > > +#define SC_R_DMA_3_CH27 487 > > +#define SC_R_DMA_3_CH28 488 > > +#define SC_R_DMA_3_CH29 489 > > +#define SC_R_DMA_3_CH30 490 > > +#define SC_R_DMA_3_CH31 491 > > +#define SC_R_AUDIO_PLL_1 492 > > +#define SC_R_AUDIO_CLK_0 493 > > +#define SC_R_AUDIO_CLK_1 494 > > +#define SC_R_MCLK_OUT_0 495 > > +#define SC_R_MCLK_OUT_1 496 > > +#define SC_R_PMIC_0 497 > > +#define SC_R_PMIC_1 498 > > +#define SC_R_SECO 499 > > +#define SC_R_CAAM_JR1 500 > > +#define SC_R_CAAM_JR2 501 > > +#define SC_R_CAAM_JR3 502 > > +#define SC_R_SECO_MU_2 503 > > +#define SC_R_SECO_MU_3 504 > > +#define SC_R_SECO_MU_4 505 > > +#define SC_R_HDMI_RX_PWM_0 506 > > +#define SC_R_A35 507 > > +#define SC_R_A35_0 508 > > +#define SC_R_A35_1 509 > > +#define SC_R_A35_2 510 > > +#define SC_R_A35_3 511 > > +#define SC_R_DSP 512 > > +#define SC_R_DSP_RAM 513 > > +#define SC_R_CAAM_JR1_OUT 514 > > +#define SC_R_CAAM_JR2_OUT 515 > > +#define SC_R_CAAM_JR3_OUT 516 > > +#define SC_R_VPU_DEC_0 517 > > +#define SC_R_VPU_ENC_0 518 > > +#define SC_R_CAAM_JR0 519 > > +#define SC_R_CAAM_JR0_OUT 520 > > +#define SC_R_PMIC_2 521 > > +#define SC_R_DBLOGIC 522 > > +#define SC_R_HDMI_PLL_1 523 > > +#define SC_R_BOARD_R0 524 > > +#define SC_R_BOARD_R1 525 > > +#define SC_R_BOARD_R2 526 > > +#define SC_R_BOARD_R3 527 > > +#define SC_R_BOARD_R4 528 > > +#define SC_R_BOARD_R5 529 > > +#define SC_R_BOARD_R6 530 > > +#define SC_R_BOARD_R7 531 > > +#define SC_R_MJPEG_DEC_MP 532 > > +#define SC_R_MJPEG_ENC_MP 533 > > +#define SC_R_VPU_TS_0 534 > > +#define SC_R_VPU_MU_0 535 > > +#define SC_R_VPU_MU_1 536 > > +#define SC_R_VPU_MU_2 537 > > +#define SC_R_VPU_MU_3 538 > > +#define SC_R_VPU_ENC_1 539 > > +#define SC_R_VPU 540 > > +#define SC_R_LAST 541 > > + > > +#endif /* __DT_BINDINGS_RSCRC_IMX_H */ > > -- > > 2.7.4 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe devicetree" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fvger > .kernel.org%2Fmajordomo- > info.html&data=02%7C01%7Caisheng.dong%40nxp.com%7C3cca739d17c14cf > fc34c08d5af7be76b%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C6 > 36607869058181126&sdata=AgpA2aSoPbriOKPM3qfRCeKrO7ck5CIgcQdESqx > U8ms%3D&reserved=0 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 3/5] arm64: dts: imx: add imx8qxp support 2018-05-02 18:00 ` A.s. Dong @ 2018-05-02 20:50 ` Rob Herring 0 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2018-05-02 20:50 UTC (permalink / raw) To: A.s. Dong Cc: linux-arm-kernel@lists.infradead.org, dongas86@gmail.com, kernel@pengutronix.de, shawnguo@kernel.org, Fabio Estevam, catalin.marinas@arm.com, will.deacon@arm.com, dl-linux-imx, Mark Rutland, devicetree@vger.kernel.org On Wed, May 2, 2018 at 1:00 PM, A.s. Dong <aisheng.dong@nxp.com> wrote: >> -----Original Message----- >> From: Rob Herring [mailto:robh@kernel.org] >> Sent: Tuesday, May 1, 2018 11:55 PM >> To: A.s. Dong <aisheng.dong@nxp.com> >> Cc: linux-arm-kernel@lists.infradead.org; dongas86@gmail.com; >> kernel@pengutronix.de; shawnguo@kernel.org; Fabio Estevam >> <fabio.estevam@nxp.com>; catalin.marinas@arm.com; >> will.deacon@arm.com; dl-linux-imx <linux-imx@nxp.com>; Mark Rutland >> <mark.rutland@arm.com>; devicetree@vger.kernel.org >> Subject: Re: [PATCH 3/5] arm64: dts: imx: add imx8qxp support >> >> On Sat, Apr 28, 2018 at 03:06:15AM +0800, Dong Aisheng wrote: >> > Add imx8qxp support >> > >> > + gpu: gpu@53100000 { >> > + compatible = "fsl,imx8qxp-gpu", "fsl,imx8x-gpu"; >> >> Documented? >> > > No. > Does it have to be documented first before we can write it in > dts files? If yes, maybe I can remove GPU node first as it actually > is far from being working right now. Yes, it must be documented first. >> > + dma_subsys: dma@5a000000 { >> >> bus@... >> >> > + compatible = "simple-bus"; >> > + #address-cells = <2>; >> > + #size-cells = <2>; >> >> Really need 64-bits of size? >> > > Just used to align with child nodes. Any better suggestion? > >> > + reg = <0x0 0x5a000000 0x0 0x1000000>; >> >> If you have registers for the bus, then it is not a simple-bus (or at >> least should have a more specific compatible in addition). >> > > It could be removed. It's just subsystem address space range. > >> > + ranges; >> >> A non-empty ranges is preferred to limit the address space of the bus. >> > > Got it. > >> > + >> > + dma_lpuart0: serial@5a060000 { >> > + compatible = "fsl,imx7ulp-lpuart"; >> > + reg = <0x0 0x5a060000 0x0 0x1000>; >> > + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; >> > + interrupt-parent = <&gic>; >> > + clocks = <&clk IMX8QXP_UART0_CLK>; >> > + clock-names = "ipg"; >> > + status = "disabled"; >> > + }; >> > + >> > + dma_i2c0: i2c@5a800000 { >> > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; >> > + reg = <0x0 0x5a800000 0x0 0x4000>; >> > + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; >> > + interrupt-parent = <&gic>; >> > + clocks = <&clk IMX8QXP_I2C0_CLK>; >> > + clock-names = "per"; >> > + assigned-clocks = <&clk IMX8QXP_I2C0_CLK>; >> > + assigned-clock-rates = <24000000>; >> > + power-domains = <&pd_dma_lpi2c0>; >> >> What does the power-domain control exactly? An I2C controller isn't big >> enough to have power gates and you already have clocks defined here, so >> what else is there? >> > > On MX8, Every IP module reside in a subsystem has a power domain. > IP module simply power on/off domains according to requirements, > and SCU firmware will check and may do extra power off of the whole > subsystem if no child using it. So each modules has to operate it properly. > >> > + status = "disabled"; >> > + }; >> > + >> > + dma_i2c1: i2c@5a810000 { >> > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; >> > + reg = <0x0 0x5a810000 0x0 0x4000>; >> > + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; >> > + interrupt-parent = <&gic>; >> > + clocks = <&clk IMX8QXP_I2C1_CLK>; >> > + clock-names = "per"; >> > + assigned-clocks = <&clk IMX8QXP_I2C1_CLK>; >> > + assigned-clock-rates = <24000000>; >> > + status = "disabled"; >> > + }; >> > + >> > + dma_i2c2: i2c@5a820000 { >> > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; >> > + reg = <0x0 0x5a820000 0x0 0x4000>; >> > + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; >> > + interrupt-parent = <&gic>; >> > + clocks = <&clk IMX8QXP_I2C2_CLK>; >> > + clock-names = "per"; >> > + assigned-clocks = <&clk IMX8QXP_I2C2_CLK>; >> > + assigned-clock-rates = <24000000>; >> > + power-domains = <&pd_dma_lpi2c2>; >> > + status = "disabled"; >> > + }; >> > + >> > + dma_i2c3: i2c@5a830000 { >> > + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; >> > + reg = <0x0 0x5a830000 0x0 0x4000>; >> > + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; >> > + interrupt-parent = <&gic>; >> > + clocks = <&clk IMX8QXP_I2C3_CLK>; >> > + clock-names = "per"; >> > + assigned-clocks = <&clk IMX8QXP_I2C3_CLK>; >> > + assigned-clock-rates = <24000000>; >> > + power-domains = <&pd_dma_lpi2c3>; >> > + status = "disabled"; >> > + }; >> > + }; >> > + >> > + conn_subsys: conn@5b000000 { >> >> bus@... >> >> > + compatible = "simple-bus"; >> > + #address-cells = <2>; >> > + #size-cells = <2>; >> > + reg = <0x0 0x5b000000 0x0 0x1000000>; >> > + ranges; >> >> Same comments here. >> >> > + >> > + usdhc1: usdhc@5b010000 { >> >> mmc@... >> > > Got it > >> > + compatible = "fsl,imx7d-usdhc"; >> > + interrupt-parent = <&gic>; >> > + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; >> > + reg = <0x0 0x5b010000 0x0 0x10000>; >> >> Really have 64KB of registers? >> > > The real IP register address does not have 64KB. It's just IP slot address space > Defined in RM. Need change it according to real address range? > > Regards > Dong Aisheng > >> > + clocks = <&clk IMX8QXP_SDHC0_IPG_CLK>, >> > + <&clk IMX8QXP_SDHC0_CLK>, >> > + <&clk IMX8QXP_CLK_DUMMY>; >> > + clock-names = "ipg", "per", "ahb"; >> > + assigned-clocks = <&clk IMX8QXP_SDHC0_DIV>; >> > + assigned-clock-rates = <200000000>; >> > + power-domains = <&pd_conn_sdhc0>; >> > + status = "disabled"; >> > + }; >> > + >> > + usdhc2: usdhc@5b020000 { >> > + compatible = "fsl,imx7d-usdhc"; >> > + interrupt-parent = <&gic>; >> > + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; >> > + reg = <0x0 0x5b020000 0x0 0x10000>; >> > + clocks = <&clk IMX8QXP_SDHC1_IPG_CLK>, >> > + <&clk IMX8QXP_SDHC1_CLK>, >> > + <&clk IMX8QXP_CLK_DUMMY>; >> > + clock-names = "ipg", "per", "ahb"; >> > + assigned-clocks = <&clk IMX8QXP_SDHC1_DIV>; >> > + assigned-clock-rates = <200000000>; >> > + power-domains = <&pd_conn_sdhc1>; >> > + fsl,tuning-start-tap = <20>; >> > + fsl,tuning-step= <2>; >> > + status = "disabled"; >> > + }; >> > + >> > + usdhc3: usdhc@5b030000 { >> > + compatible = "fsl,imx7d-usdhc"; >> > + interrupt-parent = <&gic>; >> > + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; >> > + reg = <0x0 0x5b030000 0x0 0x10000>; >> > + clocks = <&clk IMX8QXP_SDHC2_IPG_CLK>, >> > + <&clk IMX8QXP_SDHC2_CLK>, >> > + <&clk IMX8QXP_CLK_DUMMY>; >> > + clock-names = "ipg", "per", "ahb"; >> > + assigned-clocks = <&clk IMX8QXP_SDHC2_DIV>; >> > + assigned-clock-rates = <200000000>; >> > + power-domains = <&pd_conn_sdhc2>; >> > + status = "disabled"; >> > + }; >> > + >> > + fec1: ethernet@5b040000 { >> > + compatible = "fsl,imx6sx-fec"; >> > + reg = <0x0 0x5b040000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, >> > + <GIC_SPI 256 >> IRQ_TYPE_LEVEL_HIGH>, >> > + <GIC_SPI 257 >> IRQ_TYPE_LEVEL_HIGH>, >> > + <GIC_SPI 259 >> IRQ_TYPE_LEVEL_HIGH>; >> > + clocks = <&clk IMX8QXP_ENET0_IPG_CLK>, <&clk >> IMX8QXP_ENET0_AHB_CLK>, <&clk IMX8QXP_ENET0_TX_CLK>, >> > + <&clk IMX8QXP_ENET0_PTP_CLK>; >> > + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; >> > + assigned-clocks = <&clk IMX8QXP_ENET0_REF_DIV>, >> <&clk IMX8QXP_ENET0_PTP_CLK>; >> > + assigned-clock-rates = <125000000>, <125000000>; >> > + fsl,num-tx-queues=<3>; >> > + fsl,num-rx-queues=<3>; >> > + power-domains = <&pd_conn_enet0>; >> > + status = "disabled"; >> > + }; >> > + >> > + fec2: ethernet@5b050000 { >> > + compatible = "fsl,imx8qxp-fec"; >> > + reg = <0x0 0x5b050000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, >> > + <GIC_SPI 260 >> IRQ_TYPE_LEVEL_HIGH>, >> > + <GIC_SPI 261 >> IRQ_TYPE_LEVEL_HIGH>, >> > + <GIC_SPI 263 >> IRQ_TYPE_LEVEL_HIGH>; >> > + clocks = <&clk IMX8QXP_ENET1_IPG_CLK>, <&clk >> IMX8QXP_ENET1_AHB_CLK>, <&clk IMX8QXP_ENET1_TX_CLK>, >> > + <&clk IMX8QXP_ENET1_PTP_CLK>; >> > + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; >> > + assigned-clocks = <&clk IMX8QXP_ENET1_REF_DIV>, >> <&clk IMX8QXP_ENET1_PTP_CLK>; >> > + assigned-clock-rates = <125000000>, <125000000>; >> > + fsl,num-tx-queues=<3>; >> > + fsl,num-rx-queues=<3>; >> > + power-domains = <&pd_conn_enet1>; >> > + status = "disabled"; >> > + }; >> > + }; >> > + >> > + db_subsys: db@5c000000 { >> > + compatible = "simple-bus"; >> > + #address-cells = <2>; >> > + #size-cells = <2>; >> > + reg = <0x0 0x5c000000 0x0 0x1000000>; >> > + ranges; >> > + >> > + ddr_pmu0: ddr_pmu@5c020000 { >> > + compatible = "fsl,imx8-ddr-pmu"; >> > + reg = <0x0 0x5c020000 0x0 0x10000>; >> > + }; >> > + }; >> > + >> > + lsio_subsys: lsio@5d000000 { >> > + compatible = "simple-bus"; >> > + #address-cells = <2>; >> > + #size-cells = <2>; >> > + reg = <0x0 0x5d000000 0x0 0x1000000>; >> > + ranges; >> > + >> > + lsio_mu0: mu@5d1b0000 { >> > + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; >> > + reg = <0x0 0x5d1b0000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; >> > + }; >> > + >> > + lsio_gpio0: gpio@5d080000 { >> > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; >> > + reg = <0x0 0x5d080000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; >> > + gpio-controller; >> > + #gpio-cells = <2>; >> > + interrupt-controller; >> > + #interrupt-cells = <2>; >> > + }; >> > + >> > + lsio_gpio1: gpio@5d090000 { >> > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; >> > + reg = <0x0 0x5d090000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; >> > + gpio-controller; >> > + #gpio-cells = <2>; >> > + interrupt-controller; >> > + #interrupt-cells = <2>; >> > + }; >> > + >> > + lsio_gpio2: gpio@5d0a0000 { >> > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; >> > + reg = <0x0 0x5d0a0000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; >> > + gpio-controller; >> > + #gpio-cells = <2>; >> > + interrupt-controller; >> > + #interrupt-cells = <2>; >> > + }; >> > + >> > + lsio_gpio3: gpio@5d0b0000 { >> > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; >> > + reg = <0x0 0x5d0b0000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; >> > + gpio-controller; >> > + #gpio-cells = <2>; >> > + interrupt-controller; >> > + #interrupt-cells = <2>; >> > + }; >> > + >> > + lsio_gpio4: gpio@5d0c0000 { >> > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; >> > + reg = <0x0 0x5d0c0000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; >> > + gpio-controller; >> > + #gpio-cells = <2>; >> > + interrupt-controller; >> > + #interrupt-cells = <2>; >> > + }; >> > + >> > + lsio_gpio5: gpio@5d0d0000 { >> > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; >> > + reg = <0x0 0x5d0d0000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; >> > + gpio-controller; >> > + #gpio-cells = <2>; >> > + interrupt-controller; >> > + #interrupt-cells = <2>; >> > + }; >> > + >> > + lsio_gpio6: gpio@5d0e0000 { >> > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; >> > + reg = <0x0 0x5d0e0000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; >> > + gpio-controller; >> > + #gpio-cells = <2>; >> > + interrupt-controller; >> > + #interrupt-cells = <2>; >> > + }; >> > + >> > + lsio_gpio7: gpio@5d0f0000 { >> > + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; >> > + reg = <0x0 0x5d0f0000 0x0 0x10000>; >> > + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; >> > + gpio-controller; >> > + #gpio-cells = <2>; >> > + interrupt-controller; >> > + #interrupt-cells = <2>; >> > + }; >> > + }; >> > + >> > + hsio_subsys: hsio@5f000000 { >> > + compatible = "simple-bus"; >> > + #address-cells = <2>; >> > + #size-cells = <2>; >> > + reg = <0x0 0x5f000000 0x0 0x1000000>; >> > + ranges; >> > + }; >> > + >> > +}; >> > diff --git a/include/dt-bindings/power/imx-rsrc.h b/include/dt- >> bindings/power/imx-rsrc.h >> > new file mode 100644 >> > index 0000000..b4d0980 >> > --- /dev/null >> > +++ b/include/dt-bindings/power/imx-rsrc.h >> > @@ -0,0 +1,558 @@ >> > +/* SPDX-License-Identifier: GPL-2.0+ */ >> > +/* >> > + * Copyright (C) 2016 Freescale Semiconductor, Inc. >> > + * Copyright 2017~2018 NXP >> > + */ >> > + >> > +#ifndef __DT_BINDINGS_RSCRC_IMX_H >> > +#define __DT_BINDINGS_RSCRC_IMX_H >> > + >> > +/* >> > + * These defines are used to indicate a resource. Resources include >> peripherals >> > + * and bus masters (but not memory regions). Note items from list should >> > + * never be changed or removed (only added to at the end of the list). >> > + */ >> > +#define SC_R_A53 0 >> > +#define SC_R_A53_0 1 >> > +#define SC_R_A53_1 2 >> > +#define SC_R_A53_2 3 >> > +#define SC_R_A53_3 4 >> > +#define SC_R_A72 5 >> > +#define SC_R_A72_0 6 >> > +#define SC_R_A72_1 7 >> > +#define SC_R_A72_2 8 >> > +#define SC_R_A72_3 9 >> > +#define SC_R_CCI 10 >> > +#define SC_R_DB 11 >> > +#define SC_R_DRC_0 12 >> > +#define SC_R_DRC_1 13 >> > +#define SC_R_GIC_SMMU 14 >> > +#define SC_R_IRQSTR_M4_0 15 >> > +#define SC_R_IRQSTR_M4_1 16 >> > +#define SC_R_SMMU 17 >> > +#define SC_R_GIC 18 >> > +#define SC_R_DC_0_BLIT0 19 >> > +#define SC_R_DC_0_BLIT1 20 >> > +#define SC_R_DC_0_BLIT2 21 >> > +#define SC_R_DC_0_BLIT_OUT 22 >> > +#define SC_R_DC_0_CAPTURE0 23 >> > +#define SC_R_DC_0_CAPTURE1 24 >> > +#define SC_R_DC_0_WARP 25 >> > +#define SC_R_DC_0_INTEGRAL0 26 >> > +#define SC_R_DC_0_INTEGRAL1 27 >> > +#define SC_R_DC_0_VIDEO0 28 >> > +#define SC_R_DC_0_VIDEO1 29 >> > +#define SC_R_DC_0_FRAC0 30 >> > +#define SC_R_DC_0_FRAC1 31 >> > +#define SC_R_DC_0 32 >> > +#define SC_R_GPU_2_PID0 33 >> > +#define SC_R_DC_0_PLL_0 34 >> > +#define SC_R_DC_0_PLL_1 35 >> > +#define SC_R_DC_1_BLIT0 36 >> > +#define SC_R_DC_1_BLIT1 37 >> > +#define SC_R_DC_1_BLIT2 38 >> > +#define SC_R_DC_1_BLIT_OUT 39 >> > +#define SC_R_DC_1_CAPTURE0 40 >> > +#define SC_R_DC_1_CAPTURE1 41 >> > +#define SC_R_DC_1_WARP 42 >> > +#define SC_R_DC_1_INTEGRAL0 43 >> > +#define SC_R_DC_1_INTEGRAL1 44 >> > +#define SC_R_DC_1_VIDEO0 45 >> > +#define SC_R_DC_1_VIDEO1 46 >> > +#define SC_R_DC_1_FRAC0 47 >> > +#define SC_R_DC_1_FRAC1 48 >> > +#define SC_R_DC_1 49 >> > +#define SC_R_GPU_3_PID0 50 >> > +#define SC_R_DC_1_PLL_0 51 >> > +#define SC_R_DC_1_PLL_1 52 >> > +#define SC_R_SPI_0 53 >> > +#define SC_R_SPI_1 54 >> > +#define SC_R_SPI_2 55 >> > +#define SC_R_SPI_3 56 >> > +#define SC_R_UART_0 57 >> > +#define SC_R_UART_1 58 >> > +#define SC_R_UART_2 59 >> > +#define SC_R_UART_3 60 >> > +#define SC_R_UART_4 61 >> > +#define SC_R_EMVSIM_0 62 >> > +#define SC_R_EMVSIM_1 63 >> > +#define SC_R_DMA_0_CH0 64 >> > +#define SC_R_DMA_0_CH1 65 >> > +#define SC_R_DMA_0_CH2 66 >> > +#define SC_R_DMA_0_CH3 67 >> > +#define SC_R_DMA_0_CH4 68 >> > +#define SC_R_DMA_0_CH5 69 >> > +#define SC_R_DMA_0_CH6 70 >> > +#define SC_R_DMA_0_CH7 71 >> > +#define SC_R_DMA_0_CH8 72 >> > +#define SC_R_DMA_0_CH9 73 >> > +#define SC_R_DMA_0_CH10 74 >> > +#define SC_R_DMA_0_CH11 75 >> > +#define SC_R_DMA_0_CH12 76 >> > +#define SC_R_DMA_0_CH13 77 >> > +#define SC_R_DMA_0_CH14 78 >> > +#define SC_R_DMA_0_CH15 79 >> > +#define SC_R_DMA_0_CH16 80 >> > +#define SC_R_DMA_0_CH17 81 >> > +#define SC_R_DMA_0_CH18 82 >> > +#define SC_R_DMA_0_CH19 83 >> > +#define SC_R_DMA_0_CH20 84 >> > +#define SC_R_DMA_0_CH21 85 >> > +#define SC_R_DMA_0_CH22 86 >> > +#define SC_R_DMA_0_CH23 87 >> > +#define SC_R_DMA_0_CH24 88 >> > +#define SC_R_DMA_0_CH25 89 >> > +#define SC_R_DMA_0_CH26 90 >> > +#define SC_R_DMA_0_CH27 91 >> > +#define SC_R_DMA_0_CH28 92 >> > +#define SC_R_DMA_0_CH29 93 >> > +#define SC_R_DMA_0_CH30 94 >> > +#define SC_R_DMA_0_CH31 95 >> > +#define SC_R_I2C_0 96 >> > +#define SC_R_I2C_1 97 >> > +#define SC_R_I2C_2 98 >> > +#define SC_R_I2C_3 99 >> > +#define SC_R_I2C_4 100 >> > +#define SC_R_ADC_0 101 >> > +#define SC_R_ADC_1 102 >> > +#define SC_R_FTM_0 103 >> > +#define SC_R_FTM_1 104 >> > +#define SC_R_CAN_0 105 >> > +#define SC_R_CAN_1 106 >> > +#define SC_R_CAN_2 107 >> > +#define SC_R_DMA_1_CH0 108 >> > +#define SC_R_DMA_1_CH1 109 >> > +#define SC_R_DMA_1_CH2 110 >> > +#define SC_R_DMA_1_CH3 111 >> > +#define SC_R_DMA_1_CH4 112 >> > +#define SC_R_DMA_1_CH5 113 >> > +#define SC_R_DMA_1_CH6 114 >> > +#define SC_R_DMA_1_CH7 115 >> > +#define SC_R_DMA_1_CH8 116 >> > +#define SC_R_DMA_1_CH9 117 >> > +#define SC_R_DMA_1_CH10 118 >> > +#define SC_R_DMA_1_CH11 119 >> > +#define SC_R_DMA_1_CH12 120 >> > +#define SC_R_DMA_1_CH13 121 >> > +#define SC_R_DMA_1_CH14 122 >> > +#define SC_R_DMA_1_CH15 123 >> > +#define SC_R_DMA_1_CH16 124 >> > +#define SC_R_DMA_1_CH17 125 >> > +#define SC_R_DMA_1_CH18 126 >> > +#define SC_R_DMA_1_CH19 127 >> > +#define SC_R_DMA_1_CH20 128 >> > +#define SC_R_DMA_1_CH21 129 >> > +#define SC_R_DMA_1_CH22 130 >> > +#define SC_R_DMA_1_CH23 131 >> > +#define SC_R_DMA_1_CH24 132 >> > +#define SC_R_DMA_1_CH25 133 >> > +#define SC_R_DMA_1_CH26 134 >> > +#define SC_R_DMA_1_CH27 135 >> > +#define SC_R_DMA_1_CH28 136 >> > +#define SC_R_DMA_1_CH29 137 >> > +#define SC_R_DMA_1_CH30 138 >> > +#define SC_R_DMA_1_CH31 139 >> > +#define SC_R_UNUSED1 140 >> > +#define SC_R_UNUSED2 141 >> > +#define SC_R_UNUSED3 142 >> > +#define SC_R_UNUSED4 143 >> > +#define SC_R_GPU_0_PID0 144 >> > +#define SC_R_GPU_0_PID1 145 >> > +#define SC_R_GPU_0_PID2 146 >> > +#define SC_R_GPU_0_PID3 147 >> > +#define SC_R_GPU_1_PID0 148 >> > +#define SC_R_GPU_1_PID1 149 >> > +#define SC_R_GPU_1_PID2 150 >> > +#define SC_R_GPU_1_PID3 151 >> > +#define SC_R_PCIE_A 152 >> > +#define SC_R_SERDES_0 153 >> > +#define SC_R_MATCH_0 154 >> > +#define SC_R_MATCH_1 155 >> > +#define SC_R_MATCH_2 156 >> > +#define SC_R_MATCH_3 157 >> > +#define SC_R_MATCH_4 158 >> > +#define SC_R_MATCH_5 159 >> > +#define SC_R_MATCH_6 160 >> > +#define SC_R_MATCH_7 161 >> > +#define SC_R_MATCH_8 162 >> > +#define SC_R_MATCH_9 163 >> > +#define SC_R_MATCH_10 164 >> > +#define SC_R_MATCH_11 165 >> > +#define SC_R_MATCH_12 166 >> > +#define SC_R_MATCH_13 167 >> > +#define SC_R_MATCH_14 168 >> > +#define SC_R_PCIE_B 169 >> > +#define SC_R_SATA_0 170 >> > +#define SC_R_SERDES_1 171 >> > +#define SC_R_HSIO_GPIO 172 >> > +#define SC_R_MATCH_15 173 >> > +#define SC_R_MATCH_16 174 >> > +#define SC_R_MATCH_17 175 >> > +#define SC_R_MATCH_18 176 >> > +#define SC_R_MATCH_19 177 >> > +#define SC_R_MATCH_20 178 >> > +#define SC_R_MATCH_21 179 >> > +#define SC_R_MATCH_22 180 >> > +#define SC_R_MATCH_23 181 >> > +#define SC_R_MATCH_24 182 >> > +#define SC_R_MATCH_25 183 >> > +#define SC_R_MATCH_26 184 >> > +#define SC_R_MATCH_27 185 >> > +#define SC_R_MATCH_28 186 >> > +#define SC_R_LCD_0 187 >> > +#define SC_R_LCD_0_PWM_0 188 >> > +#define SC_R_LCD_0_I2C_0 189 >> > +#define SC_R_LCD_0_I2C_1 190 >> > +#define SC_R_PWM_0 191 >> > +#define SC_R_PWM_1 192 >> > +#define SC_R_PWM_2 193 >> > +#define SC_R_PWM_3 194 >> > +#define SC_R_PWM_4 195 >> > +#define SC_R_PWM_5 196 >> > +#define SC_R_PWM_6 197 >> > +#define SC_R_PWM_7 198 >> > +#define SC_R_GPIO_0 199 >> > +#define SC_R_GPIO_1 200 >> > +#define SC_R_GPIO_2 201 >> > +#define SC_R_GPIO_3 202 >> > +#define SC_R_GPIO_4 203 >> > +#define SC_R_GPIO_5 204 >> > +#define SC_R_GPIO_6 205 >> > +#define SC_R_GPIO_7 206 >> > +#define SC_R_GPT_0 207 >> > +#define SC_R_GPT_1 208 >> > +#define SC_R_GPT_2 209 >> > +#define SC_R_GPT_3 210 >> > +#define SC_R_GPT_4 211 >> > +#define SC_R_KPP 212 >> > +#define SC_R_MU_0A 213 >> > +#define SC_R_MU_1A 214 >> > +#define SC_R_MU_2A 215 >> > +#define SC_R_MU_3A 216 >> > +#define SC_R_MU_4A 217 >> > +#define SC_R_MU_5A 218 >> > +#define SC_R_MU_6A 219 >> > +#define SC_R_MU_7A 220 >> > +#define SC_R_MU_8A 221 >> > +#define SC_R_MU_9A 222 >> > +#define SC_R_MU_10A 223 >> > +#define SC_R_MU_11A 224 >> > +#define SC_R_MU_12A 225 >> > +#define SC_R_MU_13A 226 >> > +#define SC_R_MU_5B 227 >> > +#define SC_R_MU_6B 228 >> > +#define SC_R_MU_7B 229 >> > +#define SC_R_MU_8B 230 >> > +#define SC_R_MU_9B 231 >> > +#define SC_R_MU_10B 232 >> > +#define SC_R_MU_11B 233 >> > +#define SC_R_MU_12B 234 >> > +#define SC_R_MU_13B 235 >> > +#define SC_R_ROM_0 236 >> > +#define SC_R_FSPI_0 237 >> > +#define SC_R_FSPI_1 238 >> > +#define SC_R_IEE 239 >> > +#define SC_R_IEE_R0 240 >> > +#define SC_R_IEE_R1 241 >> > +#define SC_R_IEE_R2 242 >> > +#define SC_R_IEE_R3 243 >> > +#define SC_R_IEE_R4 244 >> > +#define SC_R_IEE_R5 245 >> > +#define SC_R_IEE_R6 246 >> > +#define SC_R_IEE_R7 247 >> > +#define SC_R_SDHC_0 248 >> > +#define SC_R_SDHC_1 249 >> > +#define SC_R_SDHC_2 250 >> > +#define SC_R_ENET_0 251 >> > +#define SC_R_ENET_1 252 >> > +#define SC_R_MLB_0 253 >> > +#define SC_R_DMA_2_CH0 254 >> > +#define SC_R_DMA_2_CH1 255 >> > +#define SC_R_DMA_2_CH2 256 >> > +#define SC_R_DMA_2_CH3 257 >> > +#define SC_R_DMA_2_CH4 258 >> > +#define SC_R_USB_0 259 >> > +#define SC_R_USB_1 260 >> > +#define SC_R_USB_0_PHY 261 >> > +#define SC_R_USB_2 262 >> > +#define SC_R_USB_2_PHY 263 >> > +#define SC_R_DTCP 264 >> > +#define SC_R_NAND 265 >> > +#define SC_R_LVDS_0 266 >> > +#define SC_R_LVDS_0_PWM_0 267 >> > +#define SC_R_LVDS_0_I2C_0 268 >> > +#define SC_R_LVDS_0_I2C_1 269 >> > +#define SC_R_LVDS_1 270 >> > +#define SC_R_LVDS_1_PWM_0 271 >> > +#define SC_R_LVDS_1_I2C_0 272 >> > +#define SC_R_LVDS_1_I2C_1 273 >> > +#define SC_R_LVDS_2 274 >> > +#define SC_R_LVDS_2_PWM_0 275 >> > +#define SC_R_LVDS_2_I2C_0 276 >> > +#define SC_R_LVDS_2_I2C_1 277 >> > +#define SC_R_M4_0_PID0 278 >> > +#define SC_R_M4_0_PID1 279 >> > +#define SC_R_M4_0_PID2 280 >> > +#define SC_R_M4_0_PID3 281 >> > +#define SC_R_M4_0_PID4 282 >> > +#define SC_R_M4_0_RGPIO 283 >> > +#define SC_R_M4_0_SEMA42 284 >> > +#define SC_R_M4_0_TPM 285 >> > +#define SC_R_M4_0_PIT 286 >> > +#define SC_R_M4_0_UART 287 >> > +#define SC_R_M4_0_I2C 288 >> > +#define SC_R_M4_0_INTMUX 289 >> > +#define SC_R_M4_0_SIM 290 >> > +#define SC_R_M4_0_WDOG 291 >> > +#define SC_R_M4_0_MU_0B 292 >> > +#define SC_R_M4_0_MU_0A0 293 >> > +#define SC_R_M4_0_MU_0A1 294 >> > +#define SC_R_M4_0_MU_0A2 295 >> > +#define SC_R_M4_0_MU_0A3 296 >> > +#define SC_R_M4_0_MU_1A 297 >> > +#define SC_R_M4_1_PID0 298 >> > +#define SC_R_M4_1_PID1 299 >> > +#define SC_R_M4_1_PID2 300 >> > +#define SC_R_M4_1_PID3 301 >> > +#define SC_R_M4_1_PID4 302 >> > +#define SC_R_M4_1_RGPIO 303 >> > +#define SC_R_M4_1_SEMA42 304 >> > +#define SC_R_M4_1_TPM 305 >> > +#define SC_R_M4_1_PIT 306 >> > +#define SC_R_M4_1_UART 307 >> > +#define SC_R_M4_1_I2C 308 >> > +#define SC_R_M4_1_INTMUX 309 >> > +#define SC_R_M4_1_SIM 310 >> > +#define SC_R_M4_1_WDOG 311 >> > +#define SC_R_M4_1_MU_0B 312 >> > +#define SC_R_M4_1_MU_0A0 313 >> > +#define SC_R_M4_1_MU_0A1 314 >> > +#define SC_R_M4_1_MU_0A2 315 >> > +#define SC_R_M4_1_MU_0A3 316 >> > +#define SC_R_M4_1_MU_1A 317 >> > +#define SC_R_SAI_0 318 >> > +#define SC_R_SAI_1 319 >> > +#define SC_R_SAI_2 320 >> > +#define SC_R_IRQSTR_SCU2 321 >> > +#define SC_R_IRQSTR_DSP 322 >> > +#define SC_R_UNUSED5 323 >> > +#define SC_R_UNUSED6 324 >> > +#define SC_R_AUDIO_PLL_0 325 >> > +#define SC_R_PI_0 326 >> > +#define SC_R_PI_0_PWM_0 327 >> > +#define SC_R_PI_0_PWM_1 328 >> > +#define SC_R_PI_0_I2C_0 329 >> > +#define SC_R_PI_0_PLL 330 >> > +#define SC_R_PI_1 331 >> > +#define SC_R_PI_1_PWM_0 332 >> > +#define SC_R_PI_1_PWM_1 333 >> > +#define SC_R_PI_1_I2C_0 334 >> > +#define SC_R_PI_1_PLL 335 >> > +#define SC_R_SC_PID0 336 >> > +#define SC_R_SC_PID1 337 >> > +#define SC_R_SC_PID2 338 >> > +#define SC_R_SC_PID3 339 >> > +#define SC_R_SC_PID4 340 >> > +#define SC_R_SC_SEMA42 341 >> > +#define SC_R_SC_TPM 342 >> > +#define SC_R_SC_PIT 343 >> > +#define SC_R_SC_UART 344 >> > +#define SC_R_SC_I2C 345 >> > +#define SC_R_SC_MU_0B 346 >> > +#define SC_R_SC_MU_0A0 347 >> > +#define SC_R_SC_MU_0A1 348 >> > +#define SC_R_SC_MU_0A2 349 >> > +#define SC_R_SC_MU_0A3 350 >> > +#define SC_R_SC_MU_1A 351 >> > +#define SC_R_SYSCNT_RD 352 >> > +#define SC_R_SYSCNT_CMP 353 >> > +#define SC_R_DEBUG 354 >> > +#define SC_R_SYSTEM 355 >> > +#define SC_R_SNVS 356 >> > +#define SC_R_OTP 357 >> > +#define SC_R_VPU_PID0 358 >> > +#define SC_R_VPU_PID1 359 >> > +#define SC_R_VPU_PID2 360 >> > +#define SC_R_VPU_PID3 361 >> > +#define SC_R_VPU_PID4 362 >> > +#define SC_R_VPU_PID5 363 >> > +#define SC_R_VPU_PID6 364 >> > +#define SC_R_VPU_PID7 365 >> > +#define SC_R_VPU_UART 366 >> > +#define SC_R_VPUCORE 367 >> > +#define SC_R_VPUCORE_0 368 >> > +#define SC_R_VPUCORE_1 369 >> > +#define SC_R_VPUCORE_2 370 >> > +#define SC_R_VPUCORE_3 371 >> > +#define SC_R_DMA_4_CH0 372 >> > +#define SC_R_DMA_4_CH1 373 >> > +#define SC_R_DMA_4_CH2 374 >> > +#define SC_R_DMA_4_CH3 375 >> > +#define SC_R_DMA_4_CH4 376 >> > +#define SC_R_ISI_CH0 377 >> > +#define SC_R_ISI_CH1 378 >> > +#define SC_R_ISI_CH2 379 >> > +#define SC_R_ISI_CH3 380 >> > +#define SC_R_ISI_CH4 381 >> > +#define SC_R_ISI_CH5 382 >> > +#define SC_R_ISI_CH6 383 >> > +#define SC_R_ISI_CH7 384 >> > +#define SC_R_MJPEG_DEC_S0 385 >> > +#define SC_R_MJPEG_DEC_S1 386 >> > +#define SC_R_MJPEG_DEC_S2 387 >> > +#define SC_R_MJPEG_DEC_S3 388 >> > +#define SC_R_MJPEG_ENC_S0 389 >> > +#define SC_R_MJPEG_ENC_S1 390 >> > +#define SC_R_MJPEG_ENC_S2 391 >> > +#define SC_R_MJPEG_ENC_S3 392 >> > +#define SC_R_MIPI_0 393 >> > +#define SC_R_MIPI_0_PWM_0 394 >> > +#define SC_R_MIPI_0_I2C_0 395 >> > +#define SC_R_MIPI_0_I2C_1 396 >> > +#define SC_R_MIPI_1 397 >> > +#define SC_R_MIPI_1_PWM_0 398 >> > +#define SC_R_MIPI_1_I2C_0 399 >> > +#define SC_R_MIPI_1_I2C_1 400 >> > +#define SC_R_CSI_0 401 >> > +#define SC_R_CSI_0_PWM_0 402 >> > +#define SC_R_CSI_0_I2C_0 403 >> > +#define SC_R_CSI_1 404 >> > +#define SC_R_CSI_1_PWM_0 405 >> > +#define SC_R_CSI_1_I2C_0 406 >> > +#define SC_R_HDMI 407 >> > +#define SC_R_HDMI_I2S 408 >> > +#define SC_R_HDMI_I2C_0 409 >> > +#define SC_R_HDMI_PLL_0 410 >> > +#define SC_R_HDMI_RX 411 >> > +#define SC_R_HDMI_RX_BYPASS 412 >> > +#define SC_R_HDMI_RX_I2C_0 413 >> > +#define SC_R_ASRC_0 414 >> > +#define SC_R_ESAI_0 415 >> > +#define SC_R_SPDIF_0 416 >> > +#define SC_R_SPDIF_1 417 >> > +#define SC_R_SAI_3 418 >> > +#define SC_R_SAI_4 419 >> > +#define SC_R_SAI_5 420 >> > +#define SC_R_GPT_5 421 >> > +#define SC_R_GPT_6 422 >> > +#define SC_R_GPT_7 423 >> > +#define SC_R_GPT_8 424 >> > +#define SC_R_GPT_9 425 >> > +#define SC_R_GPT_10 426 >> > +#define SC_R_DMA_2_CH5 427 >> > +#define SC_R_DMA_2_CH6 428 >> > +#define SC_R_DMA_2_CH7 429 >> > +#define SC_R_DMA_2_CH8 430 >> > +#define SC_R_DMA_2_CH9 431 >> > +#define SC_R_DMA_2_CH10 432 >> > +#define SC_R_DMA_2_CH11 433 >> > +#define SC_R_DMA_2_CH12 434 >> > +#define SC_R_DMA_2_CH13 435 >> > +#define SC_R_DMA_2_CH14 436 >> > +#define SC_R_DMA_2_CH15 437 >> > +#define SC_R_DMA_2_CH16 438 >> > +#define SC_R_DMA_2_CH17 439 >> > +#define SC_R_DMA_2_CH18 440 >> > +#define SC_R_DMA_2_CH19 441 >> > +#define SC_R_DMA_2_CH20 442 >> > +#define SC_R_DMA_2_CH21 443 >> > +#define SC_R_DMA_2_CH22 444 >> > +#define SC_R_DMA_2_CH23 445 >> > +#define SC_R_DMA_2_CH24 446 >> > +#define SC_R_DMA_2_CH25 447 >> > +#define SC_R_DMA_2_CH26 448 >> > +#define SC_R_DMA_2_CH27 449 >> > +#define SC_R_DMA_2_CH28 450 >> > +#define SC_R_DMA_2_CH29 451 >> > +#define SC_R_DMA_2_CH30 452 >> > +#define SC_R_DMA_2_CH31 453 >> > +#define SC_R_ASRC_1 454 >> > +#define SC_R_ESAI_1 455 >> > +#define SC_R_SAI_6 456 >> > +#define SC_R_SAI_7 457 >> > +#define SC_R_AMIX 458 >> > +#define SC_R_MQS_0 459 >> > +#define SC_R_DMA_3_CH0 460 >> > +#define SC_R_DMA_3_CH1 461 >> > +#define SC_R_DMA_3_CH2 462 >> > +#define SC_R_DMA_3_CH3 463 >> > +#define SC_R_DMA_3_CH4 464 >> > +#define SC_R_DMA_3_CH5 465 >> > +#define SC_R_DMA_3_CH6 466 >> > +#define SC_R_DMA_3_CH7 467 >> > +#define SC_R_DMA_3_CH8 468 >> > +#define SC_R_DMA_3_CH9 469 >> > +#define SC_R_DMA_3_CH10 470 >> > +#define SC_R_DMA_3_CH11 471 >> > +#define SC_R_DMA_3_CH12 472 >> > +#define SC_R_DMA_3_CH13 473 >> > +#define SC_R_DMA_3_CH14 474 >> > +#define SC_R_DMA_3_CH15 475 >> > +#define SC_R_DMA_3_CH16 476 >> > +#define SC_R_DMA_3_CH17 477 >> > +#define SC_R_DMA_3_CH18 478 >> > +#define SC_R_DMA_3_CH19 479 >> > +#define SC_R_DMA_3_CH20 480 >> > +#define SC_R_DMA_3_CH21 481 >> > +#define SC_R_DMA_3_CH22 482 >> > +#define SC_R_DMA_3_CH23 483 >> > +#define SC_R_DMA_3_CH24 484 >> > +#define SC_R_DMA_3_CH25 485 >> > +#define SC_R_DMA_3_CH26 486 >> > +#define SC_R_DMA_3_CH27 487 >> > +#define SC_R_DMA_3_CH28 488 >> > +#define SC_R_DMA_3_CH29 489 >> > +#define SC_R_DMA_3_CH30 490 >> > +#define SC_R_DMA_3_CH31 491 >> > +#define SC_R_AUDIO_PLL_1 492 >> > +#define SC_R_AUDIO_CLK_0 493 >> > +#define SC_R_AUDIO_CLK_1 494 >> > +#define SC_R_MCLK_OUT_0 495 >> > +#define SC_R_MCLK_OUT_1 496 >> > +#define SC_R_PMIC_0 497 >> > +#define SC_R_PMIC_1 498 >> > +#define SC_R_SECO 499 >> > +#define SC_R_CAAM_JR1 500 >> > +#define SC_R_CAAM_JR2 501 >> > +#define SC_R_CAAM_JR3 502 >> > +#define SC_R_SECO_MU_2 503 >> > +#define SC_R_SECO_MU_3 504 >> > +#define SC_R_SECO_MU_4 505 >> > +#define SC_R_HDMI_RX_PWM_0 506 >> > +#define SC_R_A35 507 >> > +#define SC_R_A35_0 508 >> > +#define SC_R_A35_1 509 >> > +#define SC_R_A35_2 510 >> > +#define SC_R_A35_3 511 >> > +#define SC_R_DSP 512 >> > +#define SC_R_DSP_RAM 513 >> > +#define SC_R_CAAM_JR1_OUT 514 >> > +#define SC_R_CAAM_JR2_OUT 515 >> > +#define SC_R_CAAM_JR3_OUT 516 >> > +#define SC_R_VPU_DEC_0 517 >> > +#define SC_R_VPU_ENC_0 518 >> > +#define SC_R_CAAM_JR0 519 >> > +#define SC_R_CAAM_JR0_OUT 520 >> > +#define SC_R_PMIC_2 521 >> > +#define SC_R_DBLOGIC 522 >> > +#define SC_R_HDMI_PLL_1 523 >> > +#define SC_R_BOARD_R0 524 >> > +#define SC_R_BOARD_R1 525 >> > +#define SC_R_BOARD_R2 526 >> > +#define SC_R_BOARD_R3 527 >> > +#define SC_R_BOARD_R4 528 >> > +#define SC_R_BOARD_R5 529 >> > +#define SC_R_BOARD_R6 530 >> > +#define SC_R_BOARD_R7 531 >> > +#define SC_R_MJPEG_DEC_MP 532 >> > +#define SC_R_MJPEG_ENC_MP 533 >> > +#define SC_R_VPU_TS_0 534 >> > +#define SC_R_VPU_MU_0 535 >> > +#define SC_R_VPU_MU_1 536 >> > +#define SC_R_VPU_MU_2 537 >> > +#define SC_R_VPU_MU_3 538 >> > +#define SC_R_VPU_ENC_1 539 >> > +#define SC_R_VPU 540 >> > +#define SC_R_LAST 541 >> > + >> > +#endif /* __DT_BINDINGS_RSCRC_IMX_H */ >> > -- >> > 2.7.4 >> > >> > -- >> > To unsubscribe from this list: send the line "unsubscribe devicetree" in >> > the body of a message to majordomo@vger.kernel.org >> > More majordomo info at >> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fvger >> .kernel.org%2Fmajordomo- >> info.html&data=02%7C01%7Caisheng.dong%40nxp.com%7C3cca739d17c14cf >> fc34c08d5af7be76b%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C6 >> 36607869058181126&sdata=AgpA2aSoPbriOKPM3qfRCeKrO7ck5CIgcQdESqx >> U8ms%3D&reserved=0 ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-05-02 20:50 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1524855977-15719-1-git-send-email-aisheng.dong@nxp.com>
2018-04-27 19:06 ` [PATCH 3/5] arm64: dts: imx: add imx8qxp support Dong Aisheng
2018-04-30 5:54 ` Mark Rutland
2018-04-30 8:50 ` A.s. Dong
2018-05-01 15:55 ` Rob Herring
2018-05-02 18:00 ` A.s. Dong
2018-05-02 20:50 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).