From: Krzysztof Kozlowski <krzk@kernel.org>
To: Troy Mitchell <troymitchell988@gmail.com>,
andi.shyti@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
Date: Tue, 15 Oct 2024 10:02:21 +0200 [thread overview]
Message-ID: <1524dbc2-2c9a-476f-a06a-0d998c29534d@kernel.org> (raw)
In-Reply-To: <20241015075134.1449458-2-TroyMitchell988@gmail.com>
On 15/10/2024 09:51, Troy Mitchell wrote:
> The i2c of K1 supports fast-speed-mode and high-speed-mode,
s/i2c/I2C/
> and supports FIFO transmission.
>
> Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
> ---
> .../bindings/i2c/spacemit,k1-i2c.yaml | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
>
> diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> new file mode 100644
> index 000000000000..c1460ec2b323
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: I2C controller embedded in SpacemiT's K1 SoC
> +
> +maintainers:
> + - Troy Mitchell <troymitchell988@gmail.com>
> +
> +properties:
> + compatible:
> + const: spacemit,k1-i2c
There is no such vendor prefix.
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-frequency:
> + description:
> + Desired I2C bus clock frequency in Hz. As only fast and high-speed
> + modes are supported by hardware, possible values are 100000 and 400000.
> + enum: [100000, 400000]
> + default: 100000
> +
> + fifo-disable:
Why is this a property of a board?
Also, missing vendor prefix.
> + type: boolean
> + description:
> + Whether to disable FIFO. If FIFO is turned on, it will be interrupted
> + only when the FIFO depth is reached, which can reduce the frequency
> + of interruption.
> + default: false
Drop
> +
> +unevaluatedProperties: false
This goes after required: block.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> +
> +examples:
> + - |
> + i2c0: i2c@d4010800 {
Drop unused alias
> + compatible = "spacemit,k1-i2c";
Best regards,
Krzysztof
next prev parent reply other threads:[~2024-10-15 8:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-15 7:51 [PATCH v1 0/2] riscv: spacemit: add i2c support to K1 SoC Troy Mitchell
2024-10-15 7:51 ` [PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for " Troy Mitchell
2024-10-15 8:02 ` Krzysztof Kozlowski [this message]
2024-10-15 16:47 ` Conor Dooley
2024-10-16 2:45 ` Troy Mitchell
2024-10-16 7:44 ` Krzysztof Kozlowski
2024-10-15 9:22 ` Rob Herring (Arm)
2024-10-15 7:51 ` [PATCH v1 2/2] i2c: spacemit: add support for SpacemiT " Troy Mitchell
2024-10-15 8:08 ` Krzysztof Kozlowski
2024-10-15 9:21 ` Wolfram Sang
2024-10-18 5:17 ` Troy Mitchell
2024-10-18 6:05 ` Krzysztof Kozlowski
2024-10-18 8:33 ` Troy Mitchell
2024-10-18 8:39 ` Krzysztof Kozlowski
2024-10-15 9:17 ` Wolfram Sang
2024-10-16 2:26 ` Troy Mitchell
2024-10-16 7:06 ` Wolfram Sang
2024-10-16 9:39 ` Uwe Kleine-König
2024-10-21 7:22 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1524dbc2-2c9a-476f-a06a-0d998c29534d@kernel.org \
--to=krzk@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=troymitchell988@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).