From: Taniya Das <tdas@codeaurora.org>
To: Stephen Boyd <sboyd@codeaurora.org>,
Michael Turquette <mturquette@baylibre.com>
Cc: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
Odelu Kukatla <okukatla@codeaurora.org>,
Amit Nischal <anischal@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Taniya Das <tdas@codeaurora.org>
Subject: [PATCH 1/2] dt-bindings: clock: Introduce QCOM RPMh clock bindings
Date: Wed, 2 May 2018 16:21:16 +0530 [thread overview]
Message-ID: <1525258277-3478-2-git-send-email-tdas@codeaurora.org> (raw)
In-Reply-To: <1525258277-3478-1-git-send-email-tdas@codeaurora.org>
Add RPMh clock device bindings for Qualcomm Technology Inc's SoCs. These
devices would be used for communicating resource state requests to control
the clocks managed by RPMh.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/clock/qcom,rpmh-clk.txt | 46 ++++++++++++++++++++++
include/dt-bindings/clock/qcom,rpmh.h | 22 +++++++++++
2 files changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
create mode 100644 include/dt-bindings/clock/qcom,rpmh.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt b/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
new file mode 100644
index 0000000..2632cae
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt
@@ -0,0 +1,46 @@
+Qualcomm Technologies, Inc. RPMh Clocks
+-------------------------------------------------------
+
+Resource Power Manager Hardened (RPMh) manages shared resources on
+some Qualcomm Technologies Inc. SoCs. It accepts clock requests from
+other hardware subsystems via RSC to control clocks.
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-rpmh-clk"
+
+- #clock-cells : must contain 1
+
+Optional properties :
+
+These below properities would be required in the cases where the parent of the
+clocks would be "xo_board_div". The default parent for the clock is "xo_board".
+
+- assigned-clocks: from the common clock binding;
+ should be: clock specifier for each output clock of this
+ provider node
+
+- assigned-clock-parents: from the common clock binding;
+ should be: phandle of input clock listed in clocks
+ property
+Example :
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+
+ &apps_rsc {
+ rpmhcc: clock-controller {
+ compatible = "qcom,sdm845-rpmh-clk";
+ #clock-cells = <1>;
+ assigned-clocks = <&clock_rpmh RPMH_CXO_CLK>,
+ <&clock_rpmh RPMH_CXO_CLK_A>,
+ <&clock_rpmh RPMH_LN_BB_CLK2>,
+ <&clock_rpmh RPMH_LN_BB_CLK2_A>,
+ <&clock_rpmh RPMH_LN_BB_CLK3>,
+ <&clock_rpmh RPMH_LN_BB_CLK3_A>;
+ assigned-clock-parents = <&xo_board_div>,
+ <&xo_board_div>,
+ <&xo_board_div>,
+ <&xo_board_div>,
+ <&xo_board_div>,
+ <&xo_board_div>,
+ };
+ };
diff --git a/include/dt-bindings/clock/qcom,rpmh.h b/include/dt-bindings/clock/qcom,rpmh.h
new file mode 100644
index 0000000..f48fbd6
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,rpmh.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+
+#ifndef _DT_BINDINGS_CLK_MSM_RPMH_H
+#define _DT_BINDINGS_CLK_MSM_RPMH_H
+
+/* RPMh controlled clocks */
+#define RPMH_CXO_CLK 0
+#define RPMH_CXO_CLK_A 1
+#define RPMH_LN_BB_CLK2 2
+#define RPMH_LN_BB_CLK2_A 3
+#define RPMH_LN_BB_CLK3 4
+#define RPMH_LN_BB_CLK3_A 5
+#define RPMH_RF_CLK1 6
+#define RPMH_RF_CLK1_A 7
+#define RPMH_RF_CLK2 8
+#define RPMH_RF_CLK2_A 9
+#define RPMH_RF_CLK3 10
+#define RPMH_RF_CLK3_A 11
+
+#endif
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
next prev parent reply other threads:[~2018-05-02 10:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-02 10:51 [v6 0/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
2018-05-02 10:51 ` Taniya Das [this message]
2018-05-02 15:10 ` [PATCH 1/2] dt-bindings: clock: Introduce QCOM RPMh clock bindings Stephen Boyd
2018-05-02 10:51 ` [PATCH 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Taniya Das
2018-05-02 15:27 ` Stephen Boyd
2018-05-02 15:30 ` Stephen Boyd
2018-05-03 10:33 ` Taniya Das
2018-05-03 17:04 ` Stephen Boyd
2018-05-02 15:12 ` [v6 0/2] " Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1525258277-3478-2-git-send-email-tdas@codeaurora.org \
--to=tdas@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=anischal@codeaurora.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=okukatla@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).