From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-eopbgr10067.outbound.protection.outlook.com ([40.107.1.67]:11698 "EHLO EUR02-HE1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751745AbeECAlP (ORCPT ); Wed, 2 May 2018 20:41:15 -0400 From: Li Jun Subject: [PATCH v5 01/14] dt-bindings: connector: add properties for typec Date: Thu, 3 May 2018 08:24:41 +0800 Message-Id: <1525307094-27402-2-git-send-email-jun.li@nxp.com> In-Reply-To: <1525307094-27402-1-git-send-email-jun.li@nxp.com> References: <1525307094-27402-1-git-send-email-jun.li@nxp.com> MIME-Version: 1.0 Content-Type: text/plain Sender: devicetree-owner@vger.kernel.org To: robh+dt@kernel.org, gregkh@linuxfoundation.org, heikki.krogerus@linux.intel.com, linux@roeck-us.net Cc: jun.li@nxp.com, a.hajda@samsung.com, cw00.choi@samsung.com, shufan_lee@richtek.com, peter.chen@nxp.com, gsomlo@gmail.com, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux-imx@nxp.com List-ID: Add bingdings supported by current typec driver, so user can pass all those properties via dt. Signed-off-by: Li Jun --- .../bindings/connector/usb-connector.txt | 44 +++++++++++++++ include/dt-bindings/usb/pd.h | 62 ++++++++++++++++++++++ 2 files changed, 106 insertions(+) diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt index e1463f1..4b19de6d0 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt @@ -15,6 +15,33 @@ Optional properties: - type: size of the connector, should be specified in case of USB-A, USB-B non-fullsize connectors: "mini", "micro". +Optional properties for usb-c-connector: +- power-role: should be one of "source", "sink" or "dual"(DRP) if typec + connector has power support. +- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK + or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC. +- data-role: should be one of "host", "device", "dual"(DRD) if typec + connector supports USB data. + +Required properties for usb-c-connector with power delivery support: +- source-pdos: An array of u32 with each entry providing supported power + source data object(PDO), the detailed bit definitions of PDO can be found + in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2 + Source_Capabilities Message, the order of each entry(PDO) should follow + the PD spec chapter 6.4.1. Required for power source and power dual role. + User can specify the source PDO array via PDO_FIXED/BATT/VAR() defined in + dt-bindings/usb/pd.h. +- sink-pdos: An array of u32 with each entry providing supported power + sink data object(PDO), the detailed bit definitions of PDO can be found + in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3 + Sink Capabilities Message, the order of each entry(PDO) should follow + the PD spec chapter 6.4.1. Required for power sink and power dual role. + User can specify the sink PDO array via PDO_FIXED/BATT/VAR() defined in + dt-bindings/usb/pd.h. +- op-sink-microwatt: Sink required operating power in microwatt, if source + can't offer the power, Capability Mismatch is set, required for power + sink and power dual role. + Required nodes: - any data bus to the connector should be modeled using the OF graph bindings specified in bindings/graph.txt, unless the bus is between parent node and @@ -73,3 +100,20 @@ ccic: s2mm005@33 { }; }; }; + +3. USB-C connector attached to a typec port controller(ptn5110), which has +power delivery support and enables drp. + +typec: ptn5110@50 { + ... + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; +}; diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h new file mode 100644 index 0000000..7b7a92f --- /dev/null +++ b/include/dt-bindings/usb/pd.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DT_POWER_DELIVERY_H +#define __DT_POWER_DELIVERY_H + +/* Power delivery Power Data Object definitions */ +#define PDO_TYPE_FIXED 0 +#define PDO_TYPE_BATT 1 +#define PDO_TYPE_VAR 2 +#define PDO_TYPE_APDO 3 + +#define PDO_TYPE_SHIFT 30 +#define PDO_TYPE_MASK 0x3 + +#define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT) + +#define PDO_VOLT_MASK 0x3ff +#define PDO_CURR_MASK 0x3ff +#define PDO_PWR_MASK 0x3ff + +#define PDO_FIXED_DUAL_ROLE (1 << 29) /* Power role swap supported */ +#define PDO_FIXED_SUSPEND (1 << 28) /* USB Suspend supported (Source) */ +#define PDO_FIXED_HIGHER_CAP (1 << 28) /* Requires more than vSafe5V (Sink) */ +#define PDO_FIXED_EXTPOWER (1 << 27) /* Externally powered */ +#define PDO_FIXED_USB_COMM (1 << 26) /* USB communications capable */ +#define PDO_FIXED_DATA_SWAP (1 << 25) /* Data role swap supported */ +#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ + +#define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT) +#define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) + +#define PDO_FIXED(mv, ma, flags) \ + (PDO_TYPE(PDO_TYPE_FIXED) | (flags) | \ + PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) + +#define VSAFE5V 5000 /* mv units */ + +#define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */ +#define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */ + +#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT) +#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT) +#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT) + +#define PDO_BATT(min_mv, max_mv, max_mw) \ + (PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) | \ + PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw)) + +#define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */ +#define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ + +#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT) +#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT) +#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) + +#define PDO_VAR(min_mv, max_mv, max_ma) \ + (PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) | \ + PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma)) + + #endif /* __DT_POWER_DELIVERY_H */ -- 2.7.4