From: sunjg79@163.com
To: mathias.nyman@intel.com, gregkh@linuxfoundation.org, robh+dt@kernel.org
Cc: shawn.guo@linaro.org, xuejiancheng@hisilicon.com,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
Jianguo Sun <sunjianguo1@huawei.com>
Subject: [PATCH 1/2] dt-bindings: usb: add bindings doc for HiSilicon STB xHCI host controller
Date: Fri, 4 May 2018 17:20:44 +0800 [thread overview]
Message-ID: <1525425645-17246-2-git-send-email-sunjg79@163.com> (raw)
In-Reply-To: <1525425645-17246-1-git-send-email-sunjg79@163.com>
From: Jianguo Sun <sunjianguo1@huawei.com>
This commit adds bindings doc for HiSilicon STB xHCI host controller.
Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
---
.../bindings/usb/hisilicon,histb-xhci.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt
diff --git a/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt b/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt
new file mode 100644
index 0000000..628225f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt
@@ -0,0 +1,40 @@
+HiSilicon STB xHCI
+
+The device node for HiSilicon STB xHCI host controller
+
+Required properties:
+ - compatible : should be "hisilicon,hi3798cv200-xhci"
+ - reg : specifies physical base address and size of the registers
+ - interrupts : interrupt used by the controller
+ - clocks : a list of phandle + clock-specifier pairs, one for each
+ entry in clock-names
+ - clock-names : must contain
+ "bus": for bus clock
+ "utmi": for utmi clock
+ "pipe": for pipeE clock
+ "suspend": for suspend clock
+ - resets: a list of phandle and reset specifier pairs as listed in
+ reset-names property.
+ - reset-names: must contain
+ "soft": for soft reset
+ - phys : a list of phandle + phy specifier pairs
+ - phy-names: must contain one of following at least:
+ "inno": for inno phy
+ "combo": for combo phy
+
+Example:
+
+xhci0: xchi@f98a0000 {
+ compatible = "hisilicon,hi3798cv200-xhci";
+ reg = <0xf98a0000 0x10000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_USB3_BUS_CLK>,
+ <&crg HISTB_USB3_UTMI_CLK>,
+ <&crg HISTB_USB3_PIPE_CLK>,
+ <&crg HISTB_USB3_SUSPEND_CLK>;
+ clock-names = "bus", "utmi", "pipe", "suspend";
+ resets = <&crg 0xb0 12>;
+ reset-names = "soft";
+ phys = <&usb2_phy1_port1 0>, <&combphy0 PHY_TYPE_USB3>;
+ phy-names = "inno", "combo";
+};
--
2.7.4
next prev parent reply other threads:[~2018-05-04 9:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-04 9:20 [PATCH 0/2] add support for HiSilicon STB xHCI host controller sunjg79
2018-05-04 9:20 ` sunjg79 [this message]
2018-05-04 9:20 ` [PATCH 2/2] xhci: hisilicon: support " sunjg79
2018-05-04 9:59 ` Chunfeng Yun
2018-05-04 10:32 ` Jianguo Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1525425645-17246-2-git-send-email-sunjg79@163.com \
--to=sunjg79@163.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
--cc=sunjianguo1@huawei.com \
--cc=xuejiancheng@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).