devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: sunjg79@163.com
To: mathias.nyman@intel.com, gregkh@linuxfoundation.org, robh+dt@kernel.org
Cc: shawn.guo@linaro.org, xuejiancheng@hisilicon.com,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	Jianguo Sun <sunjianguo1@huawei.com>
Subject: [PATCH 2/2] xhci: hisilicon: support HiSilicon STB xHCI host controller
Date: Fri,  4 May 2018 17:20:45 +0800	[thread overview]
Message-ID: <1525425645-17246-3-git-send-email-sunjg79@163.com> (raw)
In-Reply-To: <1525425645-17246-1-git-send-email-sunjg79@163.com>

From: Jianguo Sun <sunjianguo1@huawei.com>

This commit adds support for HiSilicon STB xHCI host controller.

Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
---
 drivers/usb/host/Kconfig      |   7 +
 drivers/usb/host/Makefile     |   1 +
 drivers/usb/host/xhci-histb.c | 409 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 417 insertions(+)
 create mode 100644 drivers/usb/host/xhci-histb.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5d958da..c813fc4 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -52,6 +52,13 @@ config USB_XHCI_PLATFORM
 
 	  If unsure, say N.
 
+config USB_XHCI_HISTB
+	tristate "xHCI support for HiSilicon STB SoCs"
+	depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST)
+	help
+	  Say 'Y' to enable the support for the xHCI host controller
+	  found in HiSilicon STB SoCs.
+
 config USB_XHCI_MTK
 	tristate "xHCI support for MediaTek SoCs"
 	select MFD_SYSCON
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 8a8cffe..9b669c9 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
 obj-$(CONFIG_USB_XHCI_HCD)	+= xhci-hcd.o
 obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
 obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
+obj-$(CONFIG_USB_XHCI_HISTB)	+= xhci-histb.o
 obj-$(CONFIG_USB_XHCI_MTK)	+= xhci-mtk.o
 obj-$(CONFIG_USB_XHCI_TEGRA)	+= xhci-tegra.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c
new file mode 100644
index 0000000..5ec549f
--- /dev/null
+++ b/drivers/usb/host/xhci-histb.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver for HiSilicon STB SoCs
+ *
+ * Copyright (C) 2017-2018 HiSilicon Co., Ltd. http://www.hisilicon.com
+ *
+ * Authors: Jianguo Sun <sunjianguo1@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include "xhci.h"
+
+#define GTXTHRCFG		0xc108
+#define GRXTHRCFG		0xc10c
+#define REG_GUSB2PHYCFG0	0xc200
+#define BIT_UTMI_8_16		BIT(3)
+#define BIT_UTMI_ULPI		BIT(4)
+#define BIT_FREECLK_EXIST	BIT(30)
+
+#define REG_GUSB3PIPECTL0	0xc2c0
+#define USB3_DEEMPHASIS_MASK	GENMASK(2, 1)
+#define USB3_DEEMPHASIS0	BIT(1)
+#define USB3_TX_MARGIN1		BIT(4)
+
+struct xhci_hcd_histb {
+	struct device		*dev;
+	struct usb_hcd		*hcd;
+	void __iomem		*ctrl;
+	struct clk		*bus_clk;
+	struct clk		*utmi_clk;
+	struct clk		*pipe_clk;
+	struct clk		*suspend_clk;
+	struct reset_control	*soft_reset;
+};
+
+static inline struct xhci_hcd_histb *hcd_to_histb(struct usb_hcd *hcd)
+{
+	return dev_get_drvdata(hcd->self.controller);
+}
+
+static int xhci_histb_config(struct xhci_hcd_histb *histb)
+{
+	struct device_node *np = histb->dev->of_node;
+	u32 regval;
+
+	if (of_property_match_string(np, "phys-names", "inno") >= 0) {
+		/* USB2 PHY chose ulpi 8bit interface */
+		regval = readl(histb->ctrl + REG_GUSB2PHYCFG0);
+		regval &= ~BIT_UTMI_ULPI;
+		regval &= ~(BIT_UTMI_8_16);
+		regval &= ~BIT_FREECLK_EXIST;
+		writel(regval, histb->ctrl + REG_GUSB2PHYCFG0);
+	}
+
+	if (of_property_match_string(np, "phys-names", "combo") >= 0) {
+		/*
+		 * write 0x010c0012 to GUSB3PIPECTL0
+		 * GUSB3PIPECTL0[5:3] = 010 : Tx Margin = 900mV ,
+		 * decrease TX voltage
+		 * GUSB3PIPECTL0[2:1] = 01 : Tx Deemphasis = -3.5dB,
+		 * refer to xHCI spec
+		 */
+		regval = readl(histb->ctrl + REG_GUSB3PIPECTL0);
+		regval &= ~USB3_DEEMPHASIS_MASK;
+		regval |= USB3_DEEMPHASIS0;
+		regval |= USB3_TX_MARGIN1;
+		writel(regval, histb->ctrl + REG_GUSB3PIPECTL0);
+	}
+
+	writel(0x23100000, histb->ctrl + GTXTHRCFG);
+	writel(0x23100000, histb->ctrl + GRXTHRCFG);
+
+	return 0;
+}
+
+static int xhci_histb_clks_get(struct xhci_hcd_histb *histb)
+{
+	struct device *dev = histb->dev;
+
+	histb->bus_clk = devm_clk_get(dev, "bus");
+	if (IS_ERR(histb->bus_clk)) {
+		dev_err(dev, "fail to get bus clk\n");
+		return PTR_ERR(histb->bus_clk);
+	}
+
+	histb->utmi_clk = devm_clk_get(dev, "utmi");
+	if (IS_ERR(histb->utmi_clk)) {
+		dev_err(dev, "fail to get utmi clk\n");
+		return PTR_ERR(histb->utmi_clk);
+	}
+
+	histb->pipe_clk = devm_clk_get(dev, "pipe");
+	if (IS_ERR(histb->pipe_clk)) {
+		dev_err(dev, "fail to get pipe clk\n");
+		return PTR_ERR(histb->pipe_clk);
+	}
+
+	histb->suspend_clk = devm_clk_get(dev, "suspend");
+	if (IS_ERR(histb->suspend_clk)) {
+		dev_err(dev, "fail to get suspend clk\n");
+		return PTR_ERR(histb->suspend_clk);
+	}
+
+	return 0;
+}
+
+static int xhci_histb_host_enable(struct xhci_hcd_histb *histb)
+{
+	int ret;
+
+	ret = clk_prepare_enable(histb->bus_clk);
+	if (ret) {
+		dev_err(histb->dev, "failed to enable bus clk\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(histb->utmi_clk);
+	if (ret) {
+		dev_err(histb->dev, "failed to enable utmi clk\n");
+		goto err_utmi_clk;
+	}
+
+	ret = clk_prepare_enable(histb->pipe_clk);
+	if (ret) {
+		dev_err(histb->dev, "failed to enable pipe clk\n");
+		goto err_pipe_clk;
+	}
+
+	ret = clk_prepare_enable(histb->suspend_clk);
+	if (ret) {
+		dev_err(histb->dev, "failed to enable suspend clk\n");
+		goto err_suspend_clk;
+	}
+
+	reset_control_deassert(histb->soft_reset);
+
+	return 0;
+
+err_suspend_clk:
+	clk_disable_unprepare(histb->pipe_clk);
+err_pipe_clk:
+	clk_disable_unprepare(histb->utmi_clk);
+err_utmi_clk:
+	clk_disable_unprepare(histb->bus_clk);
+
+	return ret;
+}
+
+static void xhci_histb_host_disable(struct xhci_hcd_histb *histb)
+{
+	reset_control_assert(histb->soft_reset);
+
+	clk_disable_unprepare(histb->suspend_clk);
+	clk_disable_unprepare(histb->pipe_clk);
+	clk_disable_unprepare(histb->utmi_clk);
+	clk_disable_unprepare(histb->bus_clk);
+}
+
+static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+	/*
+	 * As of now platform drivers don't provide MSI support so we ensure
+	 * here that the generic code does not try to make a pci_dev from our
+	 * dev struct in order to setup MSI
+	 */
+	xhci->quirks |= XHCI_PLAT;
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_histb_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd_histb *histb = hcd_to_histb(hcd);
+	int ret;
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		ret = xhci_histb_config(histb);
+		if (ret)
+			return ret;
+	}
+
+	ret = xhci_gen_setup(hcd, xhci_histb_quirks);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static const struct xhci_driver_overrides xhci_histb_overrides __initconst = {
+	.reset = xhci_histb_setup,
+};
+
+static struct hc_driver __read_mostly xhci_histb_hc_driver;
+static int xhci_histb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct xhci_hcd_histb *histb;
+	const struct hc_driver *driver;
+	struct usb_hcd *hcd;
+	struct xhci_hcd *xhci;
+	struct resource *res;
+	int irq;
+	int ret = -ENODEV;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	driver = &xhci_histb_hc_driver;
+	histb = devm_kzalloc(dev, sizeof(*histb), GFP_KERNEL);
+	if (!histb)
+		return -ENOMEM;
+
+	histb->dev = dev;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	histb->ctrl = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(histb->ctrl))
+		return PTR_ERR(histb->ctrl);
+
+	ret = xhci_histb_clks_get(histb);
+	if (ret)
+		return ret;
+
+	histb->soft_reset = devm_reset_control_get(dev, "soft");
+	if (IS_ERR(histb->soft_reset)) {
+		dev_err(dev, "failed to get soft reset\n");
+		return PTR_ERR(histb->soft_reset);
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+	device_enable_async_suspend(dev);
+
+	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	hcd = usb_create_hcd(driver, dev, dev_name(dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto disable_pm;
+	}
+
+	hcd->regs = histb->ctrl;
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	histb->hcd = hcd;
+	dev_set_drvdata(hcd->self.controller, histb);
+
+	ret = xhci_histb_host_enable(histb);
+	if (ret)
+		goto put_hcd;
+
+	xhci = hcd_to_xhci(hcd);
+
+	device_wakeup_enable(hcd->self.controller);
+
+	xhci->main_hcd = hcd;
+	xhci->shared_hcd = usb_create_shared_hcd(driver, dev, dev_name(dev),
+						 hcd);
+	if (!xhci->shared_hcd) {
+		ret = -ENOMEM;
+		goto disable_host;
+	}
+
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (ret)
+		goto put_usb3_hcd;
+
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
+	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+	if (ret)
+		goto dealloc_usb2_hcd;
+
+	device_enable_async_suspend(dev);
+	pm_runtime_put_noidle(dev);
+
+	/*
+	 * Prevent runtime pm from being on as default, users should enable
+	 * runtime pm using power/control in sysfs.
+	 */
+	pm_runtime_forbid(dev);
+
+	return 0;
+
+dealloc_usb2_hcd:
+	usb_remove_hcd(hcd);
+put_usb3_hcd:
+	usb_put_hcd(xhci->shared_hcd);
+disable_host:
+	xhci_histb_host_disable(histb);
+put_hcd:
+	usb_put_hcd(hcd);
+disable_pm:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int xhci_histb_remove(struct platform_device *dev)
+{
+	struct xhci_hcd_histb *histb = platform_get_drvdata(dev);
+	struct usb_hcd *hcd = histb->hcd;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+
+	usb_remove_hcd(xhci->shared_hcd);
+	device_wakeup_disable(&dev->dev);
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(xhci->shared_hcd);
+
+	xhci_histb_host_disable(histb);
+	usb_put_hcd(hcd);
+	pm_runtime_put_sync(&dev->dev);
+	pm_runtime_disable(&dev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused xhci_histb_suspend(struct device *dev)
+{
+	struct xhci_hcd_histb *histb = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = histb->hcd;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int ret;
+
+	ret = xhci_suspend(xhci, device_may_wakeup(dev));
+
+	if (!device_may_wakeup(dev))
+		xhci_histb_host_disable(histb);
+
+	return ret;
+}
+
+static int __maybe_unused xhci_histb_resume(struct device *dev)
+{
+	struct xhci_hcd_histb *histb = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = histb->hcd;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	if (!device_may_wakeup(dev))
+		xhci_histb_host_enable(histb);
+
+	return xhci_resume(xhci, 0);
+}
+
+static const struct dev_pm_ops xhci_histb_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(xhci_histb_suspend, xhci_histb_resume)
+};
+#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_histb_pm_ops : NULL)
+
+#ifdef CONFIG_OF
+static const struct of_device_id histb_xhci_of_match[] = {
+	{ .compatible = "hisilicon,hi3798cv200-xhci"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, histb_xhci_of_match);
+#endif
+
+static struct platform_driver histb_xhci_driver = {
+	.probe	= xhci_histb_probe,
+	.remove	= xhci_histb_remove,
+	.driver	= {
+		.name = "xhci-histb",
+		.pm = DEV_PM_OPS,
+		.of_match_table = of_match_ptr(histb_xhci_of_match),
+	},
+};
+MODULE_ALIAS("platform:xhci-histb");
+
+static int __init xhci_histb_init(void)
+{
+	xhci_init_driver(&xhci_histb_hc_driver, &xhci_histb_overrides);
+	return platform_driver_register(&histb_xhci_driver);
+}
+module_init(xhci_histb_init);
+
+static void __exit xhci_histb_exit(void)
+{
+	platform_driver_unregister(&histb_xhci_driver);
+}
+module_exit(xhci_histb_exit);
+
+MODULE_DESCRIPTION("HiSilicon STB xHCI Host Controller Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4



  parent reply	other threads:[~2018-05-04  9:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-04  9:20 [PATCH 0/2] add support for HiSilicon STB xHCI host controller sunjg79
2018-05-04  9:20 ` [PATCH 1/2] dt-bindings: usb: add bindings doc " sunjg79
2018-05-04  9:20 ` sunjg79 [this message]
2018-05-04  9:59   ` [PATCH 2/2] xhci: hisilicon: support " Chunfeng Yun
2018-05-04 10:32     ` Jianguo Sun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525425645-17246-3-git-send-email-sunjg79@163.com \
    --to=sunjg79@163.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.guo@linaro.org \
    --cc=sunjianguo1@huawei.com \
    --cc=xuejiancheng@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).