devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mauro Carvalho Chehab <mchehab@s-opensource.com>
Subject: [PATCH v5 10/14] media: ov772x: reconstruct s_frame_interval()
Date: Sun,  6 May 2018 23:19:25 +0900	[thread overview]
Message-ID: <1525616369-8843-11-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1525616369-8843-1-git-send-email-akinobu.mita@gmail.com>

This splits the s_frame_interval() in subdev video ops into selecting the
frame interval and setting up the registers.

This is a preparatory change to avoid accessing registers under power
saving mode.

Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v5
- Align arguments to open parenthesis
- Sort variable declarations

 drivers/media/i2c/ov772x.c | 56 +++++++++++++++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 6c0c792..92ad13f 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -617,25 +617,16 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
 	return 0;
 }
 
-static int ov772x_set_frame_rate(struct ov772x_priv *priv,
-				 struct v4l2_fract *tpf,
-				 const struct ov772x_color_format *cfmt,
-				 const struct ov772x_win_size *win)
+static unsigned int ov772x_select_fps(struct ov772x_priv *priv,
+				      struct v4l2_fract *tpf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
-	unsigned long fin = clk_get_rate(priv->clk);
 	unsigned int fps = tpf->numerator ?
 			   tpf->denominator / tpf->numerator :
 			   tpf->denominator;
 	unsigned int best_diff;
-	unsigned int fsize;
-	unsigned int pclk;
 	unsigned int diff;
 	unsigned int idx;
 	unsigned int i;
-	u8 clkrc = 0;
-	u8 com4 = 0;
-	int ret;
 
 	/* Approximate to the closest supported frame interval. */
 	best_diff = ~0L;
@@ -646,7 +637,25 @@ static int ov772x_set_frame_rate(struct ov772x_priv *priv,
 			best_diff = diff;
 		}
 	}
-	fps = ov772x_frame_intervals[idx];
+
+	return ov772x_frame_intervals[idx];
+}
+
+static int ov772x_set_frame_rate(struct ov772x_priv *priv,
+				 unsigned int fps,
+				 const struct ov772x_color_format *cfmt,
+				 const struct ov772x_win_size *win)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+	unsigned long fin = clk_get_rate(priv->clk);
+	unsigned int best_diff;
+	unsigned int fsize;
+	unsigned int pclk;
+	unsigned int diff;
+	unsigned int i;
+	u8 clkrc = 0;
+	u8 com4 = 0;
+	int ret;
 
 	/* Use image size (with blankings) to calculate desired pixel clock. */
 	switch (cfmt->com7 & OFMT_MASK) {
@@ -711,10 +720,6 @@ static int ov772x_set_frame_rate(struct ov772x_priv *priv,
 	if (ret < 0)
 		return ret;
 
-	tpf->numerator = 1;
-	tpf->denominator = fps;
-	priv->fps = tpf->denominator;
-
 	return 0;
 }
 
@@ -735,8 +740,20 @@ static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
 {
 	struct ov772x_priv *priv = to_ov772x(sd);
 	struct v4l2_fract *tpf = &ival->interval;
+	unsigned int fps;
+	int ret;
+
+	fps = ov772x_select_fps(priv, tpf);
+
+	ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win);
+	if (ret)
+		return ret;
 
-	return ov772x_set_frame_rate(priv, tpf, priv->cfmt, priv->win);
+	tpf->numerator = 1;
+	tpf->denominator = fps;
+	priv->fps = fps;
+
+	return 0;
 }
 
 static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
@@ -993,7 +1010,6 @@ static int ov772x_set_params(struct ov772x_priv *priv,
 			     const struct ov772x_win_size *win)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
-	struct v4l2_fract tpf;
 	int ret;
 	u8  val;
 
@@ -1075,9 +1091,7 @@ static int ov772x_set_params(struct ov772x_priv *priv,
 		goto ov772x_set_fmt_error;
 
 	/* COM4, CLKRC: Set pixel clock and framerate. */
-	tpf.numerator = 1;
-	tpf.denominator = priv->fps;
-	ret = ov772x_set_frame_rate(priv, &tpf, cfmt, win);
+	ret = ov772x_set_frame_rate(priv, priv->fps, cfmt, win);
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
 
-- 
2.7.4


  parent reply	other threads:[~2018-05-06 14:20 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-06 14:19 [PATCH v5 00/14] media: ov772x: support media controller, device tree probing, etc Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 01/14] media: dt-bindings: ov772x: add device tree binding Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 02/14] media: ov772x: correct setting of banding filter Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 03/14] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING Akinobu Mita
2018-05-29 12:59   ` Mauro Carvalho Chehab
2018-05-29 13:29     ` Wolfram Sang
2018-05-29 14:32       ` Mauro Carvalho Chehab
2018-05-06 14:19 ` [PATCH v5 04/14] media: ov772x: add checks for register read errors Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 05/14] media: ov772x: add media controller support Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 06/14] media: ov772x: use generic names for reset and powerdown gpios Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 07/14] media: ov772x: omit consumer ID when getting clock reference Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 08/14] media: ov772x: support device tree probing Akinobu Mita
2018-05-07  9:26   ` Sakari Ailus
2018-05-07 14:52     ` Akinobu Mita
2018-05-14  9:16     ` jacopo mondi
2018-05-14 11:21       ` Sakari Ailus
2018-05-06 14:19 ` [PATCH v5 09/14] media: ov772x: handle nested s_power() calls Akinobu Mita
2018-05-06 14:19 ` Akinobu Mita [this message]
2018-05-14  9:02   ` [PATCH v5 10/14] media: ov772x: reconstruct s_frame_interval() jacopo mondi
2018-05-06 14:19 ` [PATCH v5 11/14] media: ov772x: use v4l2_ctrl to get current control value Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 12/14] media: ov772x: avoid accessing registers under power saving mode Akinobu Mita
2018-05-14  9:06   ` jacopo mondi
2018-05-14  9:49     ` Sakari Ailus
2018-05-14 10:03       ` jacopo mondi
2018-05-06 14:19 ` [PATCH v5 13/14] media: ov772x: make set_fmt() and s_frame_interval() return -EBUSY while streaming Akinobu Mita
2018-05-14  9:10   ` jacopo mondi
2018-05-06 14:19 ` [PATCH v5 14/14] media: ov772x: create subdevice device node Akinobu Mita
2018-05-14  9:11   ` jacopo mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525616369-8843-11-git-send-email-akinobu.mita@gmail.com \
    --to=akinobu.mita@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@s-opensource.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).