From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
Jacopo Mondi <jacopo+renesas@jmondi.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Hans Verkuil <hans.verkuil@cisco.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@s-opensource.com>
Subject: [PATCH v5 11/14] media: ov772x: use v4l2_ctrl to get current control value
Date: Sun, 6 May 2018 23:19:26 +0900 [thread overview]
Message-ID: <1525616369-8843-12-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1525616369-8843-1-git-send-email-akinobu.mita@gmail.com>
The ov772x driver provides three V4L2 controls and the current value of
each control is saved as a variable in the private data structure.
We don't need to keep track of the current value by ourself, if we use
v4l2_ctrl returned from v4l2_ctrl_new_std() instead.
This is a preparatory change to avoid accessing registers under power
saving mode. This simplifies s_ctrl() by making it just return without
saving the current control value in private area when it is called under
power saving mode.
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v5
- No changes
drivers/media/i2c/ov772x.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 92ad13f..9292a18 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -419,10 +419,10 @@ struct ov772x_priv {
struct gpio_desc *rstb_gpio;
const struct ov772x_color_format *cfmt;
const struct ov772x_win_size *win;
- unsigned short flag_vflip:1;
- unsigned short flag_hflip:1;
+ struct v4l2_ctrl *vflip_ctrl;
+ struct v4l2_ctrl *hflip_ctrl;
/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
- unsigned short band_filter;
+ struct v4l2_ctrl *band_filter_ctrl;
unsigned int fps;
/* lock to protect power_count */
struct mutex lock;
@@ -768,13 +768,11 @@ static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
switch (ctrl->id) {
case V4L2_CID_VFLIP:
val = ctrl->val ? VFLIP_IMG : 0x00;
- priv->flag_vflip = ctrl->val;
if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP))
val ^= VFLIP_IMG;
return ov772x_mask_set(client, COM3, VFLIP_IMG, val);
case V4L2_CID_HFLIP:
val = ctrl->val ? HFLIP_IMG : 0x00;
- priv->flag_hflip = ctrl->val;
if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
val ^= HFLIP_IMG;
return ov772x_mask_set(client, COM3, HFLIP_IMG, val);
@@ -794,8 +792,7 @@ static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
ret = ov772x_mask_set(client, BDBASE,
0xff, val);
}
- if (!ret)
- priv->band_filter = ctrl->val;
+
return ret;
}
@@ -1075,9 +1072,9 @@ static int ov772x_set_params(struct ov772x_priv *priv,
val |= VFLIP_IMG;
if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
val |= HFLIP_IMG;
- if (priv->flag_vflip)
+ if (priv->vflip_ctrl->val)
val ^= VFLIP_IMG;
- if (priv->flag_hflip)
+ if (priv->hflip_ctrl->val)
val ^= HFLIP_IMG;
ret = ov772x_mask_set(client,
@@ -1096,11 +1093,13 @@ static int ov772x_set_params(struct ov772x_priv *priv,
goto ov772x_set_fmt_error;
/* Set COM8. */
- if (priv->band_filter) {
+ if (priv->band_filter_ctrl->val) {
+ unsigned short band_filter = priv->band_filter_ctrl->val;
+
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);
if (!ret)
ret = ov772x_mask_set(client, BDBASE,
- 0xff, 256 - priv->band_filter);
+ 0xff, 256 - band_filter);
if (ret < 0)
goto ov772x_set_fmt_error;
}
@@ -1341,12 +1340,13 @@ static int ov772x_probe(struct i2c_client *client,
v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
v4l2_ctrl_handler_init(&priv->hdl, 3);
- v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
- V4L2_CID_VFLIP, 0, 1, 1, 0);
- v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
- V4L2_CID_HFLIP, 0, 1, 1, 0);
- v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
- V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0);
+ priv->vflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ priv->hflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ priv->band_filter_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_BAND_STOP_FILTER,
+ 0, 256, 1, 0);
priv->subdev.ctrl_handler = &priv->hdl;
if (priv->hdl.error) {
ret = priv->hdl.error;
--
2.7.4
next prev parent reply other threads:[~2018-05-06 14:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-06 14:19 [PATCH v5 00/14] media: ov772x: support media controller, device tree probing, etc Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 01/14] media: dt-bindings: ov772x: add device tree binding Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 02/14] media: ov772x: correct setting of banding filter Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 03/14] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING Akinobu Mita
2018-05-29 12:59 ` Mauro Carvalho Chehab
2018-05-29 13:29 ` Wolfram Sang
2018-05-29 14:32 ` Mauro Carvalho Chehab
2018-05-06 14:19 ` [PATCH v5 04/14] media: ov772x: add checks for register read errors Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 05/14] media: ov772x: add media controller support Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 06/14] media: ov772x: use generic names for reset and powerdown gpios Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 07/14] media: ov772x: omit consumer ID when getting clock reference Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 08/14] media: ov772x: support device tree probing Akinobu Mita
2018-05-07 9:26 ` Sakari Ailus
2018-05-07 14:52 ` Akinobu Mita
2018-05-14 9:16 ` jacopo mondi
2018-05-14 11:21 ` Sakari Ailus
2018-05-06 14:19 ` [PATCH v5 09/14] media: ov772x: handle nested s_power() calls Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 10/14] media: ov772x: reconstruct s_frame_interval() Akinobu Mita
2018-05-14 9:02 ` jacopo mondi
2018-05-06 14:19 ` Akinobu Mita [this message]
2018-05-06 14:19 ` [PATCH v5 12/14] media: ov772x: avoid accessing registers under power saving mode Akinobu Mita
2018-05-14 9:06 ` jacopo mondi
2018-05-14 9:49 ` Sakari Ailus
2018-05-14 10:03 ` jacopo mondi
2018-05-06 14:19 ` [PATCH v5 13/14] media: ov772x: make set_fmt() and s_frame_interval() return -EBUSY while streaming Akinobu Mita
2018-05-14 9:10 ` jacopo mondi
2018-05-06 14:19 ` [PATCH v5 14/14] media: ov772x: create subdevice device node Akinobu Mita
2018-05-14 9:11 ` jacopo mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1525616369-8843-12-git-send-email-akinobu.mita@gmail.com \
--to=akinobu.mita@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@s-opensource.com \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).