[PATCH v5 02/14] media: ov772x: correct setting of banding filter

[Akinobu Mita <akinobu.mita@gmail.com>]

The banding filter ON/OFF is controlled via bit 5 of COM8 register.  It
is attempted to be enabled in ov772x_set_params() by the following line.

	ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);

But this unexpectedly results disabling the banding filter, because the
mask and set bits are exclusive.

On the other hand, ov772x_s_ctrl() correctly sets the bit by:

	ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);

Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v5
- Add Acked-by: line

 drivers/media/i2c/ov772x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index b62860c..e255070 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -1035,7 +1035,7 @@ static int ov772x_set_params(struct ov772x_priv *priv,
 
 	/* Set COM8. */
 	if (priv->band_filter) {
-		ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
+		ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);
 		if (!ret)
 			ret = ov772x_mask_set(client, BDBASE,
 					      0xff, 256 - priv->band_filter);
-- 
2.7.4