From: Sricharan R <sricharan@codeaurora.org>
To: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, sboyd@codeaurora.org,
bjorn.andersson@linaro.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
absahu@codeaurora.org, marc.zyngier@arm.com,
richardcochran@gmail.com, sricharan@codeaurora.org
Subject: [PATCH V7 00/12] ARM: dts: ipq: updates to enable a few peripherals
Date: Fri, 18 May 2018 13:49:13 +0530 [thread overview]
Message-ID: <1526631565-9972-1-git-send-email-sricharan@codeaurora.org> (raw)
All the patches have been tested on ipq4019 dk01, 04, 07 and ipq8074 hk01
boards for spi, bam, qup, qpic, spi-nor, serial, pci.
[V7]
* Fixed Kbuild git bisectability issue
[V6]
* Fixed Bjorn's comments, added his acks that he gave, added Varada's acks
* Rebased on top of Andy's for-next branch.
[v5]
* Fixed a minor comment that i missed earlier.
* https://www.spinics.net/lists/arm-kernel/msg643071.html
[v4]
* Fixed more comments.
* Dropped reserved-memory nodes from board files as
that might break existing users whose u-boot do not
specify the fdt_high accordingly.
* Added chosen serial node for all boards to have
the default serial console specified from DT.
[v3]
* Fixed minor comments from v2,
https://www.spinics.net/lists/arm-kernel/msg641480.html
* Added Abhishek's review tags
[v2]
* Addressed all comments from Abhishek
* Removed dk01-c2 and dk04-c5 spinand based boards
as support for spinand is not complete
* Based all patches on top of Andy's for-next branch
[V1]
* https://www.spinics.net/lists/arm-kernel/msg631318.html
Sricharan R (12):
ARM: dts: ipq4019: Add a default chosen node
ARM: dts: ipq4019: Add a few peripheral nodes
ARM: dts: ipq4019: Change the max opp frequency
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Enable few peripherals for hk01 board
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 10 +-
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 19 ++
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts | 9 +
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 111 +++++++++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 64 +++++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts | 25 ++
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 75 ++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 162 ++++++++++--
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 62 ++++-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 313 +++++++++++++++++++++++-
11 files changed, 827 insertions(+), 27 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2018-05-18 8:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-18 8:19 Sricharan R [this message]
2018-05-18 8:19 ` [PATCH V7 01/12] ARM: dts: ipq4019: Add a default chosen node Sricharan R
2018-05-18 8:19 ` [PATCH V7 02/12] ARM: dts: ipq4019: Add a few peripheral nodes Sricharan R
2018-05-18 8:19 ` [PATCH V7 03/12] ARM: dts: ipq4019: Change the max opp frequency Sricharan R
2018-05-18 8:19 ` [PATCH V7 04/12] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi Sricharan R
2018-05-18 8:19 ` [PATCH V7 05/12] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Sricharan R
2018-05-18 8:19 ` [PATCH V7 06/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 " Sricharan R
2018-05-18 8:19 ` [PATCH V7 07/12] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data Sricharan R
2018-05-18 8:19 ` [PATCH V7 08/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Sricharan R
2018-05-18 8:19 ` [PATCH V7 09/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 " Sricharan R
2018-05-18 8:19 ` [PATCH V7 10/12] ARM: dts: ipq8074: Add peripheral nodes Sricharan R
2018-05-18 8:19 ` [PATCH V7 11/12] ARM: dts: ipq8074: Add pcie nodes Sricharan R
2018-05-18 8:19 ` [PATCH V7 12/12] ARM: dts: ipq8074: Enable few peripherals for hk01 board Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526631565-9972-1-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).