[PATCH v4 0/3] thermal: add support for r8a77995

[Yoshihiro Kaneko <ykaneko0929@gmail.com>]

This series adds thermal support for r8a77995.
R-Car D3 (r8a77995) have a thermal sensor module which is similar to Gen2.
Therefore this series adds r8a77995 support to rcar_thermal driver not
rcar_gen3_thermal driver.

This series is based on the next branch of Zhang Rui's linux tree.

v4 [Yoshihiro Kaneko]
rcar_thermal.c:
- add Tested-by tag
* As suggested by Simon Horman
- add comment to ".nirqs = 2" of rcar_gen3_thermal

rcar-thermal.txt:
* As suggested by Simon Horman
- update the explanation of the interrupts

r8a77995.dtsi:
- repositioned the thermal subnode by bus address order


v3 [Yoshihiro Kaneko]
* As suggested by Geert Uytterhoeven
rcar_thermal.c:
- make use_of_thermal in structure rcar_thermal_chip a single bit
- add feature bits to rcar_thermal_chip
- add the number of interrupts to rcar_thermal_chip
- remove rcar_thermal_type in rcar_thermal_cip
- make variable chip in rcar_thermal_probe() a const

rcar-thermal.txt:
* No change

r8a77995.dtsi:
* No change


v2 [Yoshihiro Kaneko]
* As suggested by Geert Uytterhoeven
rcar_thermal.c:
- remove rcar_of_data macro
- store a pointer to rcar_thermal_chip in rcar_thermal_priv
- remove unnecessary cast in rcar_thermal_dt_ids

rcar-thermal.txt:
- drop the fallback for D3
- update the paragraph about interrupts

r8a77995.dtsi:
- fix the base address and the register addresses
- drop the fallback

Yoshihiro Kaneko (3):
  thermal: rcar_thermal: add r8a77995 support
  dt-bindings: thermal: rcar-thermal: add R8A77995 support
  arm64: dts: renesas: r8a77995: add thermal device support

 .../devicetree/bindings/thermal/rcar-thermal.txt   |   7 +-
 arch/arm64/boot/dts/renesas/r8a77995.dtsi          |  31 ++++
 drivers/thermal/rcar_thermal.c                     | 158 ++++++++++++++++-----
 3 files changed, 162 insertions(+), 34 deletions(-)

-- 
1.9.1