From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v4 1/3] thermal: rcar_thermal: add r8a77995 support
Date: Sun, 20 May 2018 18:26:17 +0900 [thread overview]
Message-ID: <1526808379-3850-2-git-send-email-ykaneko0929@gmail.com> (raw)
In-Reply-To: <1526808379-3850-1-git-send-email-ykaneko0929@gmail.com>
Add support for R-Car D3 (r8a77995) thermal sensor.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
drivers/thermal/rcar_thermal.c | 158 ++++++++++++++++++++++++++++++++---------
1 file changed, 126 insertions(+), 32 deletions(-)
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 73e5fee..45fb284 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -58,10 +58,47 @@ struct rcar_thermal_common {
spinlock_t lock;
};
+struct rcar_thermal_chip {
+ unsigned int use_of_thermal : 1;
+ unsigned int has_filonoff : 1;
+ unsigned int irq_per_ch : 1;
+ unsigned int needs_suspend_resume : 1;
+ unsigned int nirqs;
+};
+
+static const struct rcar_thermal_chip rcar_thermal = {
+ .use_of_thermal = 0,
+ .has_filonoff = 1,
+ .irq_per_ch = 0,
+ .needs_suspend_resume = 0,
+ .nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen2_thermal = {
+ .use_of_thermal = 1,
+ .has_filonoff = 1,
+ .irq_per_ch = 0,
+ .needs_suspend_resume = 0,
+ .nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen3_thermal = {
+ .use_of_thermal = 1,
+ .has_filonoff = 0,
+ .irq_per_ch = 1,
+ .needs_suspend_resume = 1,
+ /*
+ * The Gen3 chip has 3 interrupts, but this driver uses only 2
+ * interrupts to detect a temperature change, rise or fall.
+ */
+ .nirqs = 2,
+};
+
struct rcar_thermal_priv {
void __iomem *base;
struct rcar_thermal_common *common;
struct thermal_zone_device *zone;
+ const struct rcar_thermal_chip *chip;
struct delayed_work work;
struct mutex lock;
struct list_head list;
@@ -77,13 +114,20 @@ struct rcar_thermal_priv {
#define rcar_priv_to_dev(priv) ((priv)->common->dev)
#define rcar_has_irq_support(priv) ((priv)->common->base)
#define rcar_id_to_shift(priv) ((priv)->id * 8)
-#define rcar_of_data(dev) ((unsigned long)of_device_get_match_data(dev))
-#define rcar_use_of_thermal(dev) (rcar_of_data(dev) == USE_OF_THERMAL)
-#define USE_OF_THERMAL 1
static const struct of_device_id rcar_thermal_dt_ids[] = {
- { .compatible = "renesas,rcar-thermal", },
- { .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL },
+ {
+ .compatible = "renesas,rcar-thermal",
+ .data = &rcar_thermal,
+ },
+ {
+ .compatible = "renesas,rcar-gen2-thermal",
+ .data = &rcar_gen2_thermal,
+ },
+ {
+ .compatible = "renesas,thermal-r8a77995",
+ .data = &rcar_gen3_thermal,
+ },
{},
};
MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -190,7 +234,8 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
* enable IRQ
*/
if (rcar_has_irq_support(priv)) {
- rcar_thermal_write(priv, FILONOFF, 0);
+ if (priv->chip->has_filonoff)
+ rcar_thermal_write(priv, FILONOFF, 0);
/* enable Rising/Falling edge interrupt */
rcar_thermal_write(priv, POSNEG, 0x1);
@@ -420,7 +465,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
rcar_thermal_for_each_priv(priv, common) {
rcar_thermal_irq_disable(priv);
- if (rcar_use_of_thermal(dev))
+ if (priv->chip->use_of_thermal)
thermal_remove_hwmon_sysfs(priv->zone);
else
thermal_zone_device_unregister(priv->zone);
@@ -438,6 +483,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
struct rcar_thermal_priv *priv;
struct device *dev = &pdev->dev;
struct resource *res, *irq;
+ const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
int mres = 0;
int i;
int ret = -ENODEV;
@@ -457,19 +503,35 @@ static int rcar_thermal_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (irq) {
- /*
- * platform has IRQ support.
- * Then, driver uses common registers
- * rcar_has_irq_support() will be enabled
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
- common->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(common->base))
- return PTR_ERR(common->base);
+ for (i = 0; i < chip->nirqs; i++) {
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq)
+ continue;
+ if (!common->base) {
+ /*
+ * platform has IRQ support.
+ * Then, driver uses common registers
+ * rcar_has_irq_support() will be enabled
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ mres++);
+ common->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(common->base))
+ return PTR_ERR(common->base);
+
+ idle = 0; /* polling delay is not needed */
+ }
- idle = 0; /* polling delay is not needed */
+ ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+ IRQF_SHARED, dev_name(dev), common);
+ if (ret) {
+ dev_err(dev, "irq request failed\n ");
+ goto error_unregister;
+ }
+
+ /* update ENR bits */
+ if (chip->irq_per_ch)
+ enr_bits |= 1 << i;
}
for (i = 0;; i++) {
@@ -491,6 +553,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
priv->common = common;
priv->id = i;
+ priv->chip = chip;
mutex_init(&priv->lock);
INIT_LIST_HEAD(&priv->list);
INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
@@ -498,7 +561,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
if (ret < 0)
goto error_unregister;
- if (rcar_use_of_thermal(dev))
+ if (chip->use_of_thermal)
priv->zone = devm_thermal_zone_of_sensor_register(
dev, i, priv,
&rcar_thermal_zone_of_ops);
@@ -515,7 +578,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
goto error_unregister;
}
- if (rcar_use_of_thermal(dev)) {
+ if (chip->use_of_thermal) {
/*
* thermal_zone doesn't enable hwmon as default,
* but, enable it here to keep compatible
@@ -531,20 +594,12 @@ static int rcar_thermal_probe(struct platform_device *pdev)
list_move_tail(&priv->list, &common->head);
/* update ENR bits */
- enr_bits |= 3 << (i * 8);
+ if (!chip->irq_per_ch)
+ enr_bits |= 3 << (i * 8);
}
- /* enable temperature comparation */
- if (irq) {
- ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
- dev_name(dev), common);
- if (ret) {
- dev_err(dev, "irq request failed\n ");
- goto error_unregister;
- }
-
+ if (enr_bits)
rcar_thermal_common_write(common, ENR, enr_bits);
- }
dev_info(dev, "%d sensor probed\n", i);
@@ -556,9 +611,48 @@ static int rcar_thermal_probe(struct platform_device *pdev)
return ret;
}
+#ifdef CONFIG_PM_SLEEP
+static int rcar_thermal_suspend(struct device *dev)
+{
+ struct rcar_thermal_common *common = dev_get_drvdata(dev);
+ struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+ typeof(*priv), list);
+
+ if (priv->chip->needs_suspend_resume) {
+ rcar_thermal_common_write(common, ENR, 0);
+ rcar_thermal_irq_disable(priv);
+ rcar_thermal_bset(priv, THSCR, CPCTL, 0);
+ }
+
+ return 0;
+}
+
+static int rcar_thermal_resume(struct device *dev)
+{
+ struct rcar_thermal_common *common = dev_get_drvdata(dev);
+ struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+ typeof(*priv), list);
+ int ret;
+
+ if (priv->chip->needs_suspend_resume) {
+ ret = rcar_thermal_update_temp(priv);
+ if (ret < 0)
+ return ret;
+ rcar_thermal_irq_enable(priv);
+ rcar_thermal_common_write(common, ENR, 0x03);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
+ rcar_thermal_resume);
+
static struct platform_driver rcar_thermal_driver = {
.driver = {
.name = "rcar_thermal",
+ .pm = &rcar_thermal_pm_ops,
.of_match_table = rcar_thermal_dt_ids,
},
.probe = rcar_thermal_probe,
--
1.9.1
next prev parent reply other threads:[~2018-05-20 9:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-20 9:26 [PATCH v4 0/3] thermal: add support for r8a77995 Yoshihiro Kaneko
2018-05-20 9:26 ` Yoshihiro Kaneko [this message]
2018-05-23 8:43 ` [PATCH v4 1/3] thermal: rcar_thermal: add r8a77995 support Simon Horman
2018-05-20 9:26 ` [PATCH v4 2/3] dt-bindings: thermal: rcar-thermal: add R8A77995 support Yoshihiro Kaneko
2018-05-22 16:30 ` Rob Herring
2018-05-23 8:42 ` Simon Horman
2018-05-20 9:26 ` [PATCH v4 3/3] arm64: dts: renesas: r8a77995: add thermal device support Yoshihiro Kaneko
2018-05-23 8:44 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526808379-3850-2-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=horms@verge.net.au \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).