From: Lin Huang <hl@rock-chips.com>
To: seanpaul@chromium.org, airlied@linux.ie, zyw@rock-chips.com,
kishon@ti.com
Cc: dianders@chromium.org, briannorris@chromium.org,
linux-rockchip@lists.infradead.org, heiko@sntech.de,
daniel.vetter@intel.com, dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, eballetbo@gmail.com,
robh+dt@kernel.org, devicetree@vger.kernel.org,
Lin Huang <hl@rock-chips.com>
Subject: [PATCH v7 3/5] soc: rockchip: split rockchip_typec_phy struct to separate header
Date: Wed, 23 May 2018 15:42:31 +0800 [thread overview]
Message-ID: <1527061353-16902-3-git-send-email-hl@rock-chips.com> (raw)
In-Reply-To: <1527061353-16902-1-git-send-email-hl@rock-chips.com>
we may use rockchip_phy_typec struct in other driver, so split
it to separate header.
Signed-off-by: Lin Huang <hl@rock-chips.com>
---
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- new patch here
Changes in v7:
- move new element to next patch
drivers/phy/rockchip/phy-rockchip-typec.c | 47 +-------------------------
include/soc/rockchip/rockchip_phy_typec.h | 55 +++++++++++++++++++++++++++++++
2 files changed, 56 insertions(+), 46 deletions(-)
create mode 100644 include/soc/rockchip/rockchip_phy_typec.h
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index 76a4b58..795055f 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -63,6 +63,7 @@
#include <linux/mfd/syscon.h>
#include <linux/phy/phy.h>
+#include <soc/rockchip/rockchip_phy_typec.h>
#define CMN_SSM_BANDGAP (0x21 << 2)
#define CMN_SSM_BIAS (0x22 << 2)
@@ -349,52 +350,6 @@
#define MODE_DFP_USB BIT(1)
#define MODE_DFP_DP BIT(2)
-struct usb3phy_reg {
- u32 offset;
- u32 enable_bit;
- u32 write_enable;
-};
-
-/**
- * struct rockchip_usb3phy_port_cfg: usb3-phy port configuration.
- * @reg: the base address for usb3-phy config.
- * @typec_conn_dir: the register of type-c connector direction.
- * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
- * @external_psm: the register of type-c phy external psm clock.
- * @pipe_status: the register of type-c phy pipe status.
- * @usb3_host_disable: the register of type-c usb3 host disable.
- * @usb3_host_port: the register of type-c usb3 host port.
- * @uphy_dp_sel: the register of type-c phy DP select control.
- */
-struct rockchip_usb3phy_port_cfg {
- unsigned int reg;
- struct usb3phy_reg typec_conn_dir;
- struct usb3phy_reg usb3tousb2_en;
- struct usb3phy_reg external_psm;
- struct usb3phy_reg pipe_status;
- struct usb3phy_reg usb3_host_disable;
- struct usb3phy_reg usb3_host_port;
- struct usb3phy_reg uphy_dp_sel;
-};
-
-struct rockchip_typec_phy {
- struct device *dev;
- void __iomem *base;
- struct extcon_dev *extcon;
- struct regmap *grf_regs;
- struct clk *clk_core;
- struct clk *clk_ref;
- struct reset_control *uphy_rst;
- struct reset_control *pipe_rst;
- struct reset_control *tcphy_rst;
- const struct rockchip_usb3phy_port_cfg *port_cfgs;
- /* mutex to protect access to individual PHYs */
- struct mutex lock;
-
- bool flip;
- u8 mode;
-};
-
struct phy_reg {
u16 value;
u32 addr;
diff --git a/include/soc/rockchip/rockchip_phy_typec.h b/include/soc/rockchip/rockchip_phy_typec.h
new file mode 100644
index 0000000..4afe039
--- /dev/null
+++ b/include/soc/rockchip/rockchip_phy_typec.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Lin Huang <hl@rock-chips.com>
+ */
+
+#ifndef __SOC_ROCKCHIP_PHY_TYPEC_H
+#define __SOC_ROCKCHIP_PHY_TYPEC_H
+
+struct usb3phy_reg {
+ u32 offset;
+ u32 enable_bit;
+ u32 write_enable;
+};
+
+/**
+ * struct rockchip_usb3phy_port_cfg: usb3-phy port configuration.
+ * @reg: the base address for usb3-phy config.
+ * @typec_conn_dir: the register of type-c connector direction.
+ * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
+ * @external_psm: the register of type-c phy external psm clock.
+ * @pipe_status: the register of type-c phy pipe status.
+ * @usb3_host_disable: the register of type-c usb3 host disable.
+ * @usb3_host_port: the register of type-c usb3 host port.
+ * @uphy_dp_sel: the register of type-c phy DP select control.
+ */
+struct rockchip_usb3phy_port_cfg {
+ unsigned int reg;
+ struct usb3phy_reg typec_conn_dir;
+ struct usb3phy_reg usb3tousb2_en;
+ struct usb3phy_reg external_psm;
+ struct usb3phy_reg pipe_status;
+ struct usb3phy_reg usb3_host_disable;
+ struct usb3phy_reg usb3_host_port;
+ struct usb3phy_reg uphy_dp_sel;
+};
+
+struct rockchip_typec_phy {
+ struct device *dev;
+ void __iomem *base;
+ struct extcon_dev *extcon;
+ struct regmap *grf_regs;
+ struct clk *clk_core;
+ struct clk *clk_ref;
+ struct reset_control *uphy_rst;
+ struct reset_control *pipe_rst;
+ struct reset_control *tcphy_rst;
+ const struct rockchip_usb3phy_port_cfg *port_cfgs;
+ /* mutex to protect access to individual PHYs */
+ struct mutex lock;
+ bool flip;
+ u8 mode;
+};
+
+#endif
--
2.7.4
next prev parent reply other threads:[~2018-05-23 7:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 7:42 [PATCH v7 1/5] drm/rockchip: add transfer function for cdn-dp Lin Huang
2018-05-23 7:42 ` [PATCH v7 2/5] Documentation: dt-bindings: phy: add phy_config for Rockchip USB Type-C PHY Lin Huang
2018-05-23 7:42 ` Lin Huang [this message]
2018-05-23 8:48 ` [PATCH v7 3/5] soc: rockchip: split rockchip_typec_phy struct to separate header Enric Balletbo Serra
2018-05-23 7:42 ` [PATCH v7 4/5] phy: rockchip-typec: support variable phy config value Lin Huang
2018-05-23 8:50 ` Enric Balletbo Serra
2018-05-23 7:42 ` [PATCH v7 5/5] drm/rockchip: support dp training outside dp firmware Lin Huang
2018-05-23 8:50 ` Enric Balletbo Serra
2018-06-05 13:42 ` [PATCH v7 1/5] drm/rockchip: add transfer function for cdn-dp Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527061353-16902-3-git-send-email-hl@rock-chips.com \
--to=hl@rock-chips.com \
--cc=airlied@linux.ie \
--cc=briannorris@chromium.org \
--cc=daniel.vetter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eballetbo@gmail.com \
--cc=heiko@sntech.de \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=seanpaul@chromium.org \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).