From: Ilia Lin <ilialin@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org, robh@kernel.org,
mark.rutland@arm.com, catalin.marinas@arm.com,
will.deacon@arm.com
Cc: linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v11 1/2] dt: qcom: Add opp and thermal to the msm8996
Date: Wed, 23 May 2018 16:11:30 +0300 [thread overview]
Message-ID: <1527081091-13389-2-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1527081091-13389-1-git-send-email-ilialin@codeaurora.org>
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 269 ++++++++++++++++++++++++++++++++--
1 file changed, 260 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 37b7152c..e6cf290 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8996";
@@ -97,6 +98,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x0>;
enable-method = "psci";
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -109,6 +113,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x1>;
enable-method = "psci";
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
@@ -117,6 +124,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x100>;
enable-method = "psci";
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -129,6 +139,9 @@
compatible = "qcom,kryo";
reg = <0x0 0x101>;
enable-method = "psci";
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
@@ -155,6 +168,182 @@
};
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1824000000 {
+ opp-hz = /bits/ 64 <1824000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2150400000 {
+ opp-hz = /bits/ 64 <2150400000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
@@ -163,18 +352,34 @@
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu_alert0: cpu_alert0 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn0: cpu_warn0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu_crit0: cpu_crit0 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn0>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal1 {
@@ -184,18 +389,34 @@
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu_alert1: cpu_alert1 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn1: cpu_warn1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu_crit1: cpu_crit1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn1>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal2 {
@@ -205,18 +426,33 @@
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu_alert2: cpu_alert2 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn2: cpu_warn2 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu_crit2: cpu_crit2 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn2>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal3 {
@@ -226,9 +462,14 @@
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu_alert3: cpu_alert3 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn3: cpu_warn3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
@@ -238,6 +479,16 @@
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn3>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
};
@@ -414,7 +665,7 @@
};
kryocc: clock-controller@6400000 {
- compatible = "qcom,apcc-msm8996";
+ compatible = "qcom,msm8996-apcc";
reg = <0x6400000 0x90000>;
#clock-cells = <1>;
};
@@ -1001,7 +1252,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
- pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+ pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep>;
vdda-supply = <&pm8994_l28>;
--
1.9.1
next prev parent reply other threads:[~2018-05-23 13:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 13:11 [PATCH v11 0/2] CPU scaling support for msm8996 DT Ilia Lin
2018-05-23 13:11 ` Ilia Lin [this message]
2018-05-23 13:11 ` [PATCH v11 2/2] dt: qcom: Add qcom-cpufreq-kryo driver configuration Ilia Lin
2018-07-10 9:29 ` Niklas Cassel
2018-07-10 12:43 ` Ilia Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527081091-13389-2-git-send-email-ilialin@codeaurora.org \
--to=ilialin@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).