From: Christophe Roullier <christophe.roullier@st.com>
To: mark.rutland@arm.com, mcoquelin.stm32@gmail.com,
alexandre.torgue@st.com, peppe.cavallaro@st.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
netdev@vger.kernel.org, christophe.roullier@st.com,
andrew@lunn.ch
Subject: [PATCH V4 5/8] ARM: dts: stm32: Add ethernet dwmac on stm32mp1
Date: Wed, 23 May 2018 17:47:56 +0200 [thread overview]
Message-ID: <1527090479-5263-6-git-send-email-christophe.roullier@st.com> (raw)
In-Reply-To: <1527090479-5263-1-git-send-email-christophe.roullier@st.com>
Add Ethernet support (Synopsys MAC IP 4.20a) on stm32mp1 SOC.
Enable feature supported by the stmmac driver, such as TSO.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 3db03a2..ea7b6cb 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -179,5 +179,35 @@
clocks = <&rcc USART1_K>;
status = "disabled";
};
+
+ stmmac_axi_config_0: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+
+ ethernet0: ethernet@5800a000 {
+ compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_NONE>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "syscfg-clk";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHSTP>,
+ <&rcc SYSCFG>;
+ st,syscon = <&syscfg 0x4>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_0>;
+ snps,tso;
+ status = "disabled";
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2018-05-23 15:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 15:47 [PATCH V4 0/8] net: ethernet: stmmac: add support for stm32mp1 Christophe Roullier
2018-05-23 15:47 ` [PATCH V4 1/8] net: ethernet: stmmac: add adaptation for stm32mp157c Christophe Roullier
2018-05-24 7:24 ` Alexandre Torgue
2018-05-23 15:47 ` [PATCH V4 2/8] dt-bindings: stm32-dwmac: add support of MPU families Christophe Roullier
2018-05-23 15:47 ` [PATCH V4 3/8] ARM: dts: stm32: add ethernet pins to stm32mp157c Christophe Roullier
2018-05-23 15:47 ` [PATCH V4 4/8] ARM: dts: stm32: Add syscfg on stm32mp1 Christophe Roullier
2018-05-23 15:47 ` Christophe Roullier [this message]
2018-06-26 13:21 ` [PATCH V4 5/8] ARM: dts: stm32: Add ethernet dwmac " Alexandre Torgue
2018-05-23 15:47 ` [PATCH V4 6/8] net: stmmac: add dwmac-4.20a compatible Christophe Roullier
2018-05-23 15:47 ` [PATCH V4 7/8] ARM: dts: stm32: add support of ethernet on stm32mp157c-ev1 Christophe Roullier
2018-05-23 15:47 ` [PATCH V4 8/8] dt-bindings: stm32: add compatible for syscon Christophe Roullier
2018-05-23 19:03 ` Rob Herring
2018-05-23 20:08 ` [PATCH V4 0/8] net: ethernet: stmmac: add support for stm32mp1 David Miller
2018-05-24 7:22 ` Alexandre Torgue
2018-06-26 16:31 ` Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527090479-5263-6-git-send-email-christophe.roullier@st.com \
--to=christophe.roullier@st.com \
--cc=alexandre.torgue@st.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).