From: Ray Jui <ray.jui@broadcom.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Robin Murphy <robin.murphy@arm.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>, Wei Xu <xuwei5@hisilicon.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
Ray Jui <ray.jui@broadcom.com>
Subject: [PATCH] arm64: dt: Update sp805 compatible string
Date: Wed, 23 May 2018 17:52:57 -0700 [thread overview]
Message-ID: <1527123177-23273-1-git-send-email-ray.jui@broadcom.com> (raw)
The two sp805 binding documents 'arm,sp805.txt' and 'sp805-wdt.txt' are
consolidated into 1 ('arm,sp805.txt'), with the compatible string
consolidated to "arm,sp805", which are already used in all ARM32 dts
and most ARM64 dts files
Update the following dtsi to use the consolidated compatible string
'arm,sp805':
fsl-ls1088a.dtsi
fsl-ls208xa.dtsi
hi3660.dtsi
hi6220.dtsi
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 ++++++++--------
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 ++++++++--------
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 +-
4 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 1c6556b..473c503 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -614,56 +614,56 @@
};
cluster1_core0_watchdog: wdt@c000000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core1_watchdog: wdt@c010000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core2_watchdog: wdt@c020000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc020000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core3_watchdog: wdt@c030000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc030000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core0_watchdog: wdt@c100000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core1_watchdog: wdt@c110000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core2_watchdog: wdt@c120000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc120000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core3_watchdog: wdt@c130000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc130000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 137ef4d..5242ef9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -258,56 +258,56 @@
};
cluster1_core0_watchdog: wdt@c000000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core1_watchdog: wdt@c010000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core0_watchdog: wdt@c100000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core1_watchdog: wdt@c110000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster3_core0_watchdog: wdt@c200000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc200000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster3_core1_watchdog: wdt@c210000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc210000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster4_core0_watchdog: wdt@c300000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc300000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster4_core1_watchdog: wdt@c310000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc310000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index ec3eb8e..dcfa3fe 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -951,7 +951,7 @@
};
watchdog0: watchdog@e8a06000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xe8a06000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_OSC32K>;
@@ -959,7 +959,7 @@
};
watchdog1: watchdog@e8a07000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xe8a07000 0x0 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_OSC32K>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 586b281c..beda66b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -816,7 +816,7 @@
};
watchdog0: watchdog@f8005000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xf8005000 0x0 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ao_ctrl HI6220_WDT0_PCLK>;
--
2.1.4
reply other threads:[~2018-05-24 0:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527123177-23273-1-git-send-email-ray.jui@broadcom.com \
--to=ray.jui@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=will.deacon@arm.com \
--cc=wim@linux-watchdog.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).