From: Honghui Zhang <honghui.zhang@mediatek.com>
To: Ryder Lee <ryder.lee@mediatek.com>
Cc: lorenzo.pieralisi@arm.com, marc.zyngier@arm.com,
bhelgaas@google.com, matthias.bgg@gmail.com,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
yingjoe.chen@mediatek.com, eddie.huang@mediatek.com,
hongkun.cao@mediatek.com, youlin.pei@mediatek.com,
yong.wu@mediatek.com, yt.shen@mediatek.com,
sean.wang@mediatek.com, xinping.qian@mediatek.com
Subject: Re: [PATCH] PCI: mediatek: Add system pm support for MT2712
Date: Thu, 31 May 2018 10:19:27 +0800 [thread overview]
Message-ID: <1527733167.28160.1.camel@mhfsdcap03> (raw)
In-Reply-To: <1527732336.9842.3.camel@mtkswgap22>
On Thu, 2018-05-31 at 10:05 +0800, Ryder Lee wrote:
> On Wed, 2018-05-30 at 10:35 +0800, honghui.zhang@mediatek.com wrote:
> > From: Honghui Zhang <honghui.zhang@mediatek.com>
> >
> > The MTCMOS of PCIe Host for MT2712 will be off when system suspend, and all
> > the internel control register will be reset after system resume. The PCIe
> > link should be re-established and the related control register values should
> > be re-set after system resume.
> >
> > Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
> > CC: Ryder Lee <ryder.lee@mediatek.com>
> > ---
> > drivers/pci/host/pcie-mediatek.c | 82 ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 82 insertions(+)
> >
> > diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
> > index dabf1086..60f98d92 100644
> > --- a/drivers/pci/host/pcie-mediatek.c
> > +++ b/drivers/pci/host/pcie-mediatek.c
> > @@ -132,12 +132,14 @@ struct mtk_pcie_port;
> > /**
> > * struct mtk_pcie_soc - differentiate between host generations
> > * @need_fix_class_id: whether this host's class ID needed to be fixed or not
> > + * @pm_support: whether the host's MTCMOS will be off when suspend
> > * @ops: pointer to configuration access functions
> > * @startup: pointer to controller setting functions
> > * @setup_irq: pointer to initialize IRQ functions
> > */
> > struct mtk_pcie_soc {
> > bool need_fix_class_id;
> > + bool pm_support;
> > struct pci_ops *ops;
> > int (*startup)(struct mtk_pcie_port *port);
> > int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
> > @@ -1179,12 +1181,91 @@ static int mtk_pcie_probe(struct platform_device *pdev)
> > return err;
> > }
> >
> > +static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
> > +{
> > + struct platform_device *pdev;
> > + struct mtk_pcie *pcie;
> > + struct mtk_pcie_port *port;
> > + const struct mtk_pcie_soc *soc;
> > +
> > + pdev = to_platform_device(dev);
> > + pcie = platform_get_drvdata(pdev);
>
> How about this -
> struct mtk_pcie *pcie = dev_get_drvdata(dev);
Yes, I forgot that, thanks very much for your reminder.
>
> > + soc = pcie->soc;
> > + if (!soc->pm_support)
> > + return 0;
> > +
> > + list_for_each_entry(port, &pcie->ports, list) {
> > + clk_disable_unprepare(port->ahb_ck);
> > + clk_disable_unprepare(port->sys_ck);
> > + phy_power_off(port->phy);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused mtk_pcie_resume_noirq(struct device *dev)
> > +{
> > + struct platform_device *pdev;
> > + struct mtk_pcie *pcie;
> > + struct mtk_pcie_port *port;
> > + const struct mtk_pcie_soc *soc;
> > + int ret;
> > +
> > + pdev = to_platform_device(dev);
> > + pcie = platform_get_drvdata(pdev);
>
> struct mtk_pcie *pcie = dev_get_drvdata(dev);
thanks.
>
> > + soc = pcie->soc;
> > + if (!soc->pm_support)
> > + return 0;
> > +
> > + list_for_each_entry(port, &pcie->ports, list) {
> > + ret = phy_power_on(port->phy);
> > + if (ret) {
> > + dev_err(dev, "could not power on phy\n");
> > + return ret;
> > + }
> > + ret = clk_prepare_enable(port->sys_ck);
> > + if (ret) {
> > + dev_err(dev, "enable sys clock error\n");
> > + phy_power_off(port->phy);
> > + return ret;
> > + }
> > +
> > + ret = clk_prepare_enable(port->ahb_ck);
> > + if (ret) {
> > + dev_err(dev, "enable ahb clock error\n");
> > + phy_power_off(port->phy);
> > + clk_disable_unprepare(port->sys_ck);
> > + return ret;
> > + }
> > +
> > + ret = soc->startup(port);
> > + if (ret) {
> > + dev_err(dev, "pcie linkup failed\n");
> > + phy_power_off(port->phy);
> > + clk_disable_unprepare(port->sys_ck);
> > + clk_disable_unprepare(port->ahb_ck);
> > + return ret;
> > + }
> > +
> > + if (IS_ENABLED(CONFIG_PCI_MSI))
> > + mtk_pcie_enable_msi(port);
> > + }
> > +
> > + return 0;
> > +}
> > +
>
>
>
next prev parent reply other threads:[~2018-05-31 2:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-30 2:35 [PATCH] PCI: mediatek: Add system pm support for MT2712 honghui.zhang
2018-05-31 2:05 ` Ryder Lee
2018-05-31 2:19 ` Honghui Zhang [this message]
2018-05-31 4:20 ` Bjorn Helgaas
2018-05-31 7:37 ` Honghui Zhang
2018-06-01 0:42 ` [RFC PATCH] PCI: mediatek: mtk_pcie_pm_ops can be static kbuild test robot
2018-06-01 0:42 ` [PATCH] PCI: mediatek: Add system pm support for MT2712 kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527733167.28160.1.camel@mhfsdcap03 \
--to=honghui.zhang@mediatek.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=hongkun.cao@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marc.zyngier@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=ryder.lee@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=xinping.qian@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
--cc=yong.wu@mediatek.com \
--cc=youlin.pei@mediatek.com \
--cc=yt.shen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).